openinverter.org wiki - User contributions [en]

Lexus GS450h Drivetrain

2021-03-28T05:46:24Z

Mdrobnak: Add weight and dimensions from arturk in forum post

[[File:Inverter connector.png|thumb|GS450h inverter external connector|187x187px]]
The Lexus GS450h VCU is an open source project to repurpose 2006-2012 Lexus GS450h inverters for DIY EV use. It consists of a circuit board and programming that communicates with the original logic board in the inverter and allows independent control of it without communicating with a GS450h ECU.

Note that the Toyota Camry hybrid (US market) uses a similar inverter with the same logic board, which is functionally identical to the GS450h unit.

== GS450h Inverter ==

The Lexus GS450h is a hybrid vehicle. Their inverters are suitable and attractive for DIY EVs because of:
* Good availability and price - an inverter and "transmission" can generally be purchased for less than £/€1000.
* Durability. Toyota engineers appear to have made the inverters foolproof, many inputs and outputs gracefully handle fault conditions.

* Respectable performance. Rated for a combined 250kW output.
* Ease of repurposing. Emulating the original ECU seems reasonably feasible. The transmission is a similar size and layout to many RWD transmissions.
The Lexus GS450h (2006-2012 model years) has a variety of useful components inside the inverter package:
[[File:Toyota Camry Inverter external connector.png|thumb|204x204px|Toyota Camry Inverter external connector]]
* Two high power inverters, for the 2 motors MG1 capable of handling X(?) amps, and MG2 capable of handling Y(?) amps.
* A boost module to boost the 288v battery pack up to 650v as used in the Lexus (Note that voltages this high are not required for EV conversions).

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

The inverter is capable of running at full speeds on pack voltages from approx 280V upwards. The maximum allowable input voltage is 650V, so far, many have found that "standard" EV voltages of 300V-360V to be well suited.

'''Note that even thouigh the inverter maximum voltage rating is 650V, a 650V battery pack is not required to run this unit. It is capable of excellent performance at lower voltages, such as the typical 300V-360V found in most EVs. However, there is the opportunity to use larger packs with this unit if required in your application.'''

Should a higher voltage pack be chosen in your application for any reason, the buck/boost converter can be used to power auxiliary equipment at its native voltage.

Weight: 40 LBs

Dimensions: 14" x 9-1/2" x 8-1/2"
== GS450h Converter ==
A buck/boost converter lives within the inverter housing, originally this is used to step up the 288V battery pack in the GS450h to the 650V for use in the inverter in the GS. (Note that this does not mean the inverter requires 650V to run, it is simply a maximum rating) For those using a 600+V battery pack, this converter can be used to step the voltage down to a more reasonable level to interface with charfgers, DCDC converters, heaters, AC compressors, and other components which can be found in "regular" EV's (Tesla, Leaf, Volt, etc).

This unit is rated at 30kW, making it unsuitable for traction power, but good for auxiliary devices.

Details on how to control the converter are here: https://openinverter.org/forum/viewtopic.php?f=14&t=538

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

== GS450h Transmission ==
[[File:Inverter.png|thumb|213x213px|GS450h inverter]]
For technical analysis of this transmission, see pages 46 onwards of this document: https://www.osti.gov/servlets/purl/947393

The transmission contains two "Motor-Generator" units. MG1 sits at the front of the transmission, and interfaces with the internal combustion engine through a planetary gear set. For this reason, to obtain torque from MG1, the input shaft of the transmission must be locked in place. This is usually done using a splined coupler, which is then welded onto the transmission front mount.

The input shaft on the transmission has 21 splines, with a 28mm major diameter. It is believed that there are several Toyota clutches which will have this in their centre. The original GS450h flywheel and coupler also contains the appropriate slined centre, of course.

The fluid fill port is the banjo bolt for the upper transmission cooler hose. The specified fluid is "Toyota WS" ATF.

It is a good idea to replace the two bearings in the electric oil pump before fitting a used transmission. There is a guide [http://carlthomas66.blogspot.com/2016/03/lexus-gs450h-transmission-oil-pump.html here]. Bearing part numbers are 61900-2Z and 608-2Z, you will need one of each.

The shift position lever on the right-hand side of the transmission engages the parking pawl when in the "all-the-way-back" position. All other positions disengage this pawl. The R, N, D, M positions only affect the output of the shift position sensor.

Note the following when purchasing the transmission:
[[File:Shift position.png|thumb|154x154px|GS450h shift position sensor]]
* It is recommended to purchase one which has the electric oil pump fitted - these are a costly item as the bearings in them often fail, in some cases they cost more than the transmission.
* It is recommended to purchase a transmission which includes the wiring harness, or at least off-cuts of the connectors. Some connectors may be unavailable for purchase. There is a thread [https://openinverter.org/forum/viewtopic.php?f=14&t=271 here] which covers the connectors on this transmission.

=== Dimensions ===
Overall height (oil pan to top of bellhousing) is 39cm. Bell housing is full height, i.e. 39cm diameter, when the transmission is sitting on its oil pan (as it is on my bench), the bellhousing still just about touches the bench.

Widest point is 40cm, includes a bump for a starter motor which I don't believe the GS450h even has. Likely leftover to mate with the 2GR engine.

Overall length including tailshaft, output flange, and pilot shaft, is 82cm.

Transmission is tapered quite heavily, the width and height is closer to 25cm after the bellhousing, but hard to gauge due to various outcropping parts (motor cables, oil pump, PRNDL selector, etc)

Weight is 128kg. Unknown if this is dry or filled. Likely partially filled. Unknown if this includes oil pump and cables.

The input shaft pokes out 29mm from the general highest point of the back of the bell housing? (e.g. set a 20cm ruler there and measure from it)

The taper at the tip of the shaft before the splines appear fully is 6mm long. (i.e. the length of the tip portion without proper splines)

=== The Oil Pump ===
[[File:Oilpump.png|300x300px]]

[[File:Connector - A55 Oil Pump Motor Controller 90980–12483.png|269x269px]]

[[File:Oil Pump.png|386x386px]]

[[File:Oil Pump2.png|400x400px]]

The metal case is the ground.

Black (pin 6) is PWM in from your controller.

Brown (pin 7) is feedback from the oil pump. It's PWM. Do what you want with this or leave it disconnected.

The fat blue wire (pin 5) is 12V power. The oil pump uses around 50A Max. So plan for that. Add your own relay to stop it draining your battery while the car is off.

The PWM for this is weird, it's not just 0-100. IIRC it is 0% at both ends, and rises to 100% near the middle, then back down again. This is just based on the sound of the pump with no load, so needs more testing to find the real values.

Here is a list of compatible Toyota part numbers for the oil pump controller: G1167-30020

===Oil Pump Hardware===
As per ggeter:
"For those, like me, who didn't get the pump with the transmission unit, here are the part numbers for bolts and (what appears to be a metal) gasket."

Bolts (4) 90080-10197 $2.76 ea

Gasket (1) 35142-30010 $14

The oil pump also contains 3 black rubber o-rings:

1 x 55mm internal diameter, 2.5mm cross section (for the black outer cover)

2 x 50mm internal diameter, 2.5mm cross section (between each 'layer' of the pump housing).

The oil pump motor cover is held onto the pump housing by 4 M5 x 16mm flanged screws.

== Wiring Harness Connectors ==
Here are a list of connectors required for the GS450h transmission & inverter if you need/wish to build the harness for your build. (It is a good idea to find components with at least the connectors to build on. As some of the connectors are impossible to obtain)
{| class="wikitable"
|+Inverter Connectors
!Connector
!Part No.
!Location
!
|-
|Inverter interface connector (A62)
|90980–12630
|Black connector on the side of the inverter. This connector is not sold anywhere to our knowledge.
|
|}
A good alternative to this, otherwise difficult to obtain, connector is to replace the receptacle/header with the following parts from Molex:
{| class="wikitable"
|+
!Image
!Part No.
!Item
!Quantity
|-
|[[File:036638-0002.jpg|center|frameless|80x80px]]
|036638-0002
|CMC header connector 48pin
|1
|-
|[[File:064320-1311.jpg|center|frameless|80x80px]]
|064320-1311
|CMC receptacle 48pin
|1
|-
|[[File:064320-1301.jpg|center|frameless|80x80px]]
|064320-1301
|CMC wire cap
|1
|-
|[[File:064323-1039.jpg|center|frameless|80x80px]]
|064323-1039
|CP terminal
|4
|-
|[[File:064323-1029.jpg|center|frameless|80x80px]]
|064323-1029
|CP terminal
|32
|-
|[[File:064325-1010.jpg|center|frameless|80x80px]]
|064325-1010
|CMC plug
|8
|-
|[[File:064325-1023.jpg|center|frameless|80x80px]]
|064325-1023
|CMC plug
|4
|}

{| class="wikitable"
|+Transmission Connectors
!Connector
!Part No.
!Location
!
|-
|ECT Solenoid (E83)
|Sumitomo 6189-1092
|Located on the left hand side of the transmission above the oil pan.
|[[File:Sumitomo 6189-1092.jpg|center|frameless|100x100px]]
|-
|Shift Lever Position Sensor (E80)
|Sumitomo 90980-12362
|Located on the right side of the transmission next to the shift lever inhibitor switch.
|[[File:Sumitomo 90980-12362.png|center|frameless|100x100px]]
|-
|MG1 & MG2 Resolver(s) (E81 & E82)
|Sumitomo 6189-1240
|Two connectors located on the left side of the transmission by the bell housing.
|[[File:Sumitomo 6189-1240.jpg|center|frameless|100x100px]]
|}
{| class="wikitable"
|+Oil Pump & Oil Pump Motor Controller
!Connector
!Part No.
!Location
!
|-
|Oil Pump Temperature Sensor
|Sumitomo 6189-0175
|The connector is the small 2-pin connector in the middle of the harness between the oil pump and controller
|
|-
|HVECU -> Oil Pump Controller (A52)
|
|Single large (7-way) connector on the side of the oil pump controller
|
|}

==Control Board==
An open-source VCU, designed by Damien Maguire, can be purchased as both partially populated and fully populated and tested boards on his website:

[https://www.evbmw.com/index.php/evbmw-webshop/toyota-partially-built-boards-copy/lexus-gs450h-vcm-partial Lexus GS450H VCM Partially Built]
[[File:Transmission.png|thumb|147x147px|GS450h transmission and oil pump temperature sensor]]
[https://www.evbmw.com/index.php/evbmw-webshop/toyota-built-and-tested-boards/gs450h-vcm-fully-built-and-tested Lexus GS450H VCM Fully Built and Tested]

The VCU is an external unit that will not fit within the GS450h inverter housing. It does not replace the GS450h inverter control board, instead it interfaces with it over USART.

For those who have purchased the fully built board, the mating connectors for the VCU are Molex parts:
* 33472-2002 (Left side, grey in colour)

* 33472-2001 (Right side, black in colour)
* 33012-2002 (Crimp terminals)
* 5810130065 (Enclosure)
For partially populated board, these additional parts are required:
* 5810140011 (Header, 40 Pos)
* 75867-101LF (CONN1, Header for WiFi module)
* 5787834-1 (CONN2, USB 2.0 receptacle)
* TR10S05 (IC10, 5V DC/DC converter)
These parts are available from many electronics distributors.

== VCU Firmware ==
Firmware to run on the VCU is available on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller

This guide relates to V3.01 available here on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller/blob/master/Software/gs450h_v3_user.ino

A video tutorial to accompany this guide and firmware is available here :https://vimeo.com/501777258

In order to aid those not familiar with programming, a new firmware with a basic serial interface is now available. This will be the default loaded onto all VCU boards sold on the EVBMW webshop as of 18/01/21.

This firmware is intended as a stop gap measure before a new Openinverter based version with a web based interface becomes available. (expect mid 2021).

Instruction for use :

Connect a USB cable between the VCU and a PC.

Using a serial terminal program of your choice, connect at 115200,8,N,1.

Once connected, type ? and press enter. The following menu should then display :

<nowiki>=========== EVBMW GS450H VCU Version 3.01 ==============</nowiki>

<nowiki>************</nowiki> List of Available Commands ************

? - Print this menu

d - Print received data from inverter

D - Print configuration data

f - Calibrate minimum throttle.

g - Calibrate maximum throttle.

i - Set max drive torque (0-3500) e.g. typing i200 followed by enter sets max drive torque to 200

q - Set max reverse torque (0-3500) e.g. typing q200 followed by enter sets max reverse torque to 200

v - Set gearbox oil pump speed (0-100%) e.g. typing v50 followed by enter sets oil pump to 50% speed

a - Select LOW gear.

s - Select HIGH gear.

z - Save configuration data to EEPROM memory

<nowiki>**************************************************************</nowiki>

The menu system allows for the display of data from both the VCU, GS450H Inverter and gearbox as well as setting of parameters such as throttle calibration and maximum torque.

To select a menu option type its associated character followed by enter.

? Will display the menu.

d Displays data from the inverter in this format :

 0 1 2 3 4 5 6 7 8 9

------------------------------------------------------------------------------

00 | 0 0

10 | 0 0 0 0 0 0 0 0

20 | 0 0 0 0 0 0 0 0 0 0

30 | 0 0 0 0 0 0

40 | 0 0 0 0 0 0 0 0

50 | 0 0 0 0 0

60 |

70 |

80 | 0 0 0 0 0 0

90 | 0 0 0 0 0 0 0 0

MTH Valid: Yes Checksum: 0

DC Bus: ----v

MG1 - Speed: 0rpm Position: 0

MG2 - Speed: 0rpm Position: 0

Water Temp: 0.00c

Inductor Temp: 0.00c

Another Temp: 0c

Another Temp: 0c

D (capital or large D) displays VCU configuration data as well as information on the Gearbox status in this format :

<nowiki>***************************************************************************************************</nowiki>

Throttle Channel 1: 109

Throttle Channel 2: 53

Commanded Torque: 0

Selected Direction: DRIVE

Selected Gear: HIGH

Configured Max Drive Torque: 600

Configured Max Reverse Torque: 300

Configured gearbox oil pump speed: 40

Current valve positions:

PB1:ON

PB2:ON

PB3:ON

MG1 Stator temp: 109.69

MG2 Stator temp: 109.69

<nowiki>***************************************************************************************************</nowiki>

Throttle calibration procedure :

Set your throttle, be it a pedal or potentiometer or other, to the position of desired zero throttle.

Type f and press enter. A response like this will display:

Configured min throttle value: 109

Now press or advance the throttle to the desired position of maximum throttle.

Type g and press enter. A response like this will display:

Configured max throttle value: 633

The throttle calibration is now complete.

Next we want to set the maximum allowed drive and reverse torque values. The GS450H inverter will accept a value of between 0 and 3500 for torque.

for initial bench and vehicle testing it is advisable to limit these to low values. In this example we will set drive torque to 500 and reverse torque to 300.

First, drive torque:

Type i500 followed by enter. A response like this will display:

Configured drive torque: 500

Now reverse torque:

Type q250 followed by enter. A response like this will display:

Configured reverse torque: 250

Torque calibration is now complete.

At this point it is advised to store the now configured values to EEPROM (non volatile memory) by typing z followed by enter. A response like this will display:

Parameters stored to EEPROM

An option is provided to set the speed in % (0 to 100%) for the electric gearbox oilpump. In this example we set the speed to 50% :

Type v50 followed by enter. A response like this will display:

Configured gearbox oil pump speed: 50

I have found in testing on the E65 that 50% is a good value for keeping oil pressure up , providing cooling etc without running the pump too hard. Your millage may vary.

An option is provided to shift between LOW and HIGH gear in the GS450H gearbox. Shifts are inhibited at MG1 or MG2 speeds above 100rpm for safety at this time.

To select LOW gear type a and press enter. A response like this will display:

LOW Gear Selected

To select HIGH gear type s and press enter. A response like this will display:

HIGH Gear Selected

It is advised to leave HIGH gear selected always at this time until further testing and development has been completed.

Finally, store all parameters to EEPROM once more by typing z and press enter. A response like this will display:

Parameters stored to EEPROM

Selecting Direction.

The firmware supports the use of the IN1 and IN2 pins of the V2 VCU as direction control inputs. Operation is as follows :

If both inputs are unconnected, NEUTRAL is selected. In neutral , no torque commands are transmitted to the inverter regardless of throttle application.

If IN1is connected to +12v , DRIVE is selected. In drive both MG1 and MG2 provide torque in a forward direction to the gearbox output shaft.

If IN2 is connected to +12v , REVERSE is selected. In reverse only MG2 provides torque in a reverse direction to the gearbox output shaft.

Currently this "simple" firmware does not support contactor control. This may be provided in a later version.

WiFi Display.

A wifi web browser based display is provided in order to easily visualise data from the inverter and gearbox.

Once powered, the wifi module will create an open access point with an ssid like ESP-XXXX where XXXX will be a series of letters and numbers.

Connect to this access point with any wifi enabled device (e.g. laptop, tablet, phone etc).

Some modern devices will try to access the internet, not find it, and pop up a warning. Dismiss this and open a web browser.

Type 192.168.4.1 into the address bar and press enter. Again, some modern devices and browsers will complain that it is not a secure connection etc. Just dismiss the warning and proceed.

After a few seconds the web gauge display will appear.

Note that the voltage display is derived from the voltage reported by the inverter and both current (amps) and power (kw) gauges are inoperative as of this release.

You may wish to change the ssid and add a passphrase to the access point. To do this goto : 192.168.4.1/admin

A simple set of dialog boxes will allow the ssid, passphrase and background colour of the gauge display to be set.

==Development History==
V1 - This board was sold tested but also as a bare logic board requiring purchase of your own components and SMD placement and soldering skills. https://www.evbmw.com/index.php/evbmw-webshop/toyota-bare-boards/gs450h-bare-pcb

V2 - A new board source was found to be both high quality and low cost. The boards were redesigned around the inventory of parts available from this supplier. In particular the high cost of populated and soldered boards (10x the price) from the source used to make the v1 boards is so significantly lower on the v2 that there are likely no savings by building and soldering the board yourself. Software is still in development.
==Vendors==
There are currently no vendors who offer support on any aspects of the GS450h VCU.
==Support==
Community support is available on the [https://openinverter.org/forum/viewtopic.php?f=14&t=396 Lexus GS450H VCU Support Thread]

Lexus GS450h Drivetrain

2021-01-21T22:53:27Z

Mdrobnak: Move the new block around.

[[File:Inverter connector.png|thumb|GS450h inverter external connector|187x187px]]
The Lexus GS450h VCU is an open source project to repurpose 2006-2012 Lexus GS450h inverters for DIY EV use. It consists of a circuit board and programming that communicates with the original logic board in the inverter and allows independent control of it without communicating with a GS450h ECU.

Note that the Toyota Camry hybrid (US market) uses a similar inverter with the same logic board, which is functionally identical to the GS450h unit.

== GS450h Inverter ==

The Lexus GS450h is a hybrid vehicle. Their inverters are suitable and attractive for DIY EVs because of:
* Good availability and price - an inverter and "transmission" can generally be purchased for less than £/€1000.
* Durability. Toyota engineers appear to have made the inverters foolproof, many inputs and outputs gracefully handle fault conditions.

* Respectable performance. Rated for a combined 250kW output.
* Ease of repurposing. Emulating the original ECU seems reasonably feasible. The transmission is a similar size and layout to many RWD transmissions.
The Lexus GS450h (2006-2012 model years) has a variety of useful components inside the inverter package:
[[File:Toyota Camry Inverter external connector.png|thumb|204x204px|Toyota Camry Inverter external connector]]
* Two high power inverters, for the 2 motors MG1 capable of handling X(?) amps, and MG2 capable of handling Y(?) amps.
* A boost module to boost the 288v battery pack up to 650v as used in the Lexus (Note that voltages this high are not required for EV conversions).

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

The inverter is capable of running at full speeds on pack voltages from approx 280V upwards. The maximum allowable input voltage is 650V, so far, many have found that "standard" EV voltages of 300V-360V to be well suited.

'''Note that even thouigh the inverter maximum voltage rating is 650V, a 650V battery pack is not required to run this unit. It is capable of excellent performance at lower voltages, such as the typical 300V-360V found in most EVs. However, there is the opportunity to use larger packs with this unit if required in your application.'''

Should a higher voltage pack be chosen in your application for any reason, the buck/boost converter can be used to power auxiliary equipment at its native voltage.

== GS450h Converter ==
A buck/boost converter lives within the inverter housing, originally this is used to step up the 288V battery pack in the GS450h to the 650V for use in the inverter in the GS. (Note that this does not mean the inverter requires 650V to run, it is simply a maximum rating) For those using a 600+V battery pack, this converter can be used to step the voltage down to a more reasonable level to interface with charfgers, DCDC converters, heaters, AC compressors, and other components which can be found in "regular" EV's (Tesla, Leaf, Volt, etc).

This unit is rated at 30kW, making it unsuitable for traction power, but good for auxiliary devices.

Details on how to control the converter are here: https://openinverter.org/forum/viewtopic.php?f=14&t=538

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

== GS450h Transmission ==
[[File:Inverter.png|thumb|213x213px|GS450h inverter]]
For technical analysis of this transmission, see pages 46 onwards of this document: https://www.osti.gov/servlets/purl/947393

The transmission contains two "Motor-Generator" units. MG1 sits at the front of the transmission, and interfaces with the internal combustion engine through a planetary gear set. For this reason, to obtain torque from MG1, the input shaft of the transmission must be locked in place. This is usually done using a splined coupler, which is then welded onto the transmission front mount.

The input shaft on the transmission has 21 splines, with a 28mm major diameter. It is believed that there are several Toyota clutches which will have this in their centre. The original GS450h flywheel and coupler also contains the appropriate slined centre, of course.

The fluid fill port is the banjo bolt for the upper transmission cooler hose. The specified fluid is "Toyota WS" ATF.

It is a good idea to replace the two bearings in the electric oil pump before fitting a used transmission. There is a guide [http://carlthomas66.blogspot.com/2016/03/lexus-gs450h-transmission-oil-pump.html here]. Bearing part numbers are 61900-2Z and 608-2Z, you will need one of each.

The shift position lever on the right-hand side of the transmission engages the parking pawl when in the "all-the-way-back" position. All other positions disengage this pawl. The R, N, D, M positions only affect the output of the shift position sensor.

Note the following when purchasing the transmission:
[[File:Shift position.png|thumb|154x154px|GS450h shift position sensor]]
* It is recommended to purchase one which has the electric oil pump fitted - these are a costly item as the bearings in them often fail, in some cases they cost more than the transmission.
* It is recommended to purchase a transmission which includes the wiring harness, or at least off-cuts of the connectors. Some connectors may be unavailable for purchase. There is a thread [https://openinverter.org/forum/viewtopic.php?f=14&t=271 here] which covers the connectors on this transmission.

=== Dimensions ===
Overall height (oil pan to top of bellhousing) is 39cm. Bell housing is full height, i.e. 39cm diameter, when the transmission is sitting on its oil pan (as it is on my bench), the bellhousing still just about touches the bench.

Widest point is 40cm, includes a bump for a starter motor which I don't believe the GS450h even has. Likely leftover to mate with the 2GR engine.

Overall length including tailshaft, output flange, and pilot shaft, is 82cm.

Transmission is tapered quite heavily, the width and height is closer to 25cm after the bellhousing, but hard to gauge due to various outcropping parts (motor cables, oil pump, PRNDL selector, etc)

Weight is 128kg. Unknown if this is dry or filled. Likely partially filled. Unknown if this includes oil pump and cables.

The input shaft pokes out 29mm from the general highest point of the back of the bell housing? (e.g. set a 20cm ruler there and measure from it)

The taper at the tip of the shaft before the splines appear fully is 6mm long. (i.e. the length of the tip portion without proper splines)

=== The Oil Pump ===
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oilpump.png|300x300px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Connector - A55 Oil Pump Motor Controller 90980–12483.png|269x269px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oil Pump.png|386x386px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oil Pump2.png|400x400px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>

The metal case is the ground.

Black (pin 6) is PWM in from your controller.

Brown (pin 7) is feedback from the oil pump. It's PWM. Do what you want with this or leave it disconnected.

The fat blue wire (pin 5) is 12V power. The oil pump uses around 50A Max. So plan for that. Add your own relay to stop it draining your battery while the car is off.

The PWM for this is weird, it's not just 0-100. IIRC it is 0% at both ends, and rises to 100% near the middle, then back down again. This is just based on the sound of the pump with no load, so needs more testing to find the real values.

Here is a list of compatible Toyota part numbers for the oil pump controller: G1167-30020

===Oil Pump Hardware===
As per ggeter:
"For those, like me, who didn't get the pump with the transmission unit, here are the part numbers for bolts and (what appears to be a metal) gasket."

Bolts (4) 90080-10197 $2.76 ea

Gasket (1) 35142-30010 $14

== Wiring Harness Connectors ==
Here are a list of connectors required for the GS450h transmission & inverter if you need/wish to build the harness for your build. (It is a good idea to find components with at least the connectors to build on. As some of the connectors are impossible to obtain)
{| class="wikitable"
|+Inverter Connectors
!Connector
!Part No.
!Location
!
|-
|Inverter interface connector (A62)
|90980–12630
|Black connector on the side of the inverter. This connector is not sold anywhere to our knowledge.
|
|}
A good alternative to this, otherwise difficult to obtain, connector is to replace the receptacle/header with the following parts from Molex:
{| class="wikitable"
|+
!Image
!Part No.
!Item
!Quantity
|-
|[[File:036638-0002.jpg|center|frameless|80x80px]]
|036638-0002
|CMC header connector 48pin
|1
|-
|[[File:064320-1311.jpg|center|frameless|80x80px]]
|064320-1311
|CMC receptacle 48pin
|1
|-
|[[File:064320-1301.jpg|center|frameless|80x80px]]
|064320-1301
|CMC wire cap
|1
|-
|[[File:064323-1039.jpg|center|frameless|80x80px]]
|064323-1039
|CP terminal
|4
|-
|[[File:064323-1029.jpg|center|frameless|80x80px]]
|064323-1029
|CP terminal
|32
|-
|[[File:064325-1010.jpg|center|frameless|80x80px]]
|064325-1010
|CMC plug
|8
|-
|[[File:064325-1023.jpg|center|frameless|80x80px]]
|064325-1023
|CMC plug
|4
|}

{| class="wikitable"
|+Transmission Connectors
!Connector
!Part No.
!Location
!
|-
|ECT Solenoid (E83)
|Sumitomo 6189-1092
|Located on the left hand side of the transmission above the oil pan.
|[[File:Sumitomo 6189-1092.jpg|center|frameless|100x100px]]
|-
|Shift Lever Position Sensor (E80)
|Sumitomo 90980-12362
|Located on the right side of the transmission next to the shift lever inhibitor switch.
|[[File:Sumitomo 90980-12362.png|center|frameless|100x100px]]
|-
|MG1 & MG2 Resolver(s) (E81 & E82)
|Sumitomo 6189-1240
|Two connectors located on the left side of the transmission by the bell housing.
|[[File:Sumitomo 6189-1240.jpg|center|frameless|100x100px]]
|}
{| class="wikitable"
|+Oil Pump & Oil Pump Motor Controller
!Connector
!Part No.
!Location
!
|-
|Oil Pump Temperature Sensor
|Sumitomo 6189-0175
|The connector is the small 2-pin connector in the middle of the harness between the oil pump and controller
|
|-
|HVECU -> Oil Pump Controller (A52)
|
|Single large (7-way) connector on the side of the oil pump controller
|
|}

==Control Board==
An open-source VCU, designed by Damien Maguire, can be purchased as both partially populated and fully populated and tested boards on his website:

[https://www.evbmw.com/index.php/evbmw-webshop/toyota-partially-built-boards-copy/lexus-gs450h-vcm-partial Lexus GS450H VCM Partially Built]
[[File:Transmission.png|thumb|147x147px|GS450h transmission and oil pump temperature sensor]]
[https://www.evbmw.com/index.php/evbmw-webshop/toyota-built-and-tested-boards/gs450h-vcm-fully-built-and-tested Lexus GS450H VCM Fully Built and Tested]

The VCU is an external unit that will not fit within the GS450h inverter housing. It does not replace the GS450h inverter control board, instead it interfaces with it over USART.

For those who have purchased the fully built board, the mating connectors for the VCU are Molex parts:
* 33472-2002 (Left side, grey in colour)

* 33472-2001 (Right side, black in colour)
* 33012-2002 (Crimp terminals)
* 5810130065 (Enclosure)
For partially populated board, these additional parts are required:
* 5810140011 (Header, 40 Pos)
* 75867-101LF (CONN1, Header for WiFi module)
* 5787834-1 (CONN2, USB 2.0 receptacle)
* TR10S05 (IC10, 5V DC/DC converter)
These parts are available from many electronics distributors.

== VCU Firmware ==
Firmware to run on the VCU is available on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller

This guide relates to V3.01 available here on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller/blob/master/Software/gs450h_v3_user.ino

A video tutorial to accompany this guide and firmware is available here :https://vimeo.com/501777258

In order to aid those not familiar with programming, a new firmware with a basic serial interface is now available. This will be the default loaded onto all VCU boards sold on the EVBMW webshop as of 18/01/21.

This firmware is intended as a stop gap measure before a new Openinverter based version with a web based interface becomes available. (expect mid 2021).

Instruction for use :

Connect a USB cable between the VCU and a PC.

Using a serial terminal program of your choice, connect at 115200,8,N,1.

Once connected, type ? and press enter. The following menu should then display :

<nowiki>=========== EVBMW GS450H VCU Version 3.01 ==============</nowiki>

<nowiki>************</nowiki> List of Available Commands ************

? - Print this menu

d - Print received data from inverter

D - Print configuration data

f - Calibrate minimum throttle.

g - Calibrate maximum throttle.

i - Set max drive torque (0-3500) e.g. typing i200 followed by enter sets max drive torque to 200

q - Set max reverse torque (0-3500) e.g. typing q200 followed by enter sets max reverse torque to 200

v - Set gearbox oil pump speed (0-100%) e.g. typing v50 followed by enter sets oil pump to 50% speed

a - Select LOW gear.

s - Select HIGH gear.

z - Save configuration data to EEPROM memory

<nowiki>**************************************************************</nowiki>

The menu system allows for the display of data from both the VCU, GS450H Inverter and gearbox as well as setting of parameters such as throttle calibration and maximum torque.

To select a menu option type its associated character followed by enter.

? Will display the menu.

d Displays data from the inverter in this format :

 0 1 2 3 4 5 6 7 8 9

------------------------------------------------------------------------------

00 | 0 0

10 | 0 0 0 0 0 0 0 0

20 | 0 0 0 0 0 0 0 0 0 0

30 | 0 0 0 0 0 0

40 | 0 0 0 0 0 0 0 0

50 | 0 0 0 0 0

60 |

70 |

80 | 0 0 0 0 0 0

90 | 0 0 0 0 0 0 0 0

MTH Valid: Yes Checksum: 0

DC Bus: ----v

MG1 - Speed: 0rpm Position: 0

MG2 - Speed: 0rpm Position: 0

Water Temp: 0.00c

Inductor Temp: 0.00c

Another Temp: 0c

Another Temp: 0c

D (capital or large D) displays VCU configuration data as well as information on the Gearbox status in this format :

<nowiki>***************************************************************************************************</nowiki>

Throttle Channel 1: 109

Throttle Channel 2: 53

Commanded Torque: 0

Selected Direction: DRIVE

Selected Gear: HIGH

Configured Max Drive Torque: 600

Configured Max Reverse Torque: 300

Configured gearbox oil pump speed: 40

Current valve positions:

PB1:ON

PB2:ON

PB3:ON

MG1 Stator temp: 109.69

MG2 Stator temp: 109.69

<nowiki>***************************************************************************************************</nowiki>

Throttle calibration procedure :

Set your throttle, be it a pedal or potentiometer or other, to the position of desired zero throttle.

Type f and press enter. A response like this will display:

Configured min throttle value: 109

Now press or advance the throttle to the desired position of maximum throttle.

Type g and press enter. A response like this will display:

Configured max throttle value: 633

The throttle calibration is now complete.

Next we want to set the maximum allowed drive and reverse torque values. The GS450H inverter will accept a value of between 0 and 3500 for torque.

for initial bench and vehicle testing it is advisable to limit these to low values. In this example we will set drive torque to 500 and reverse torque to 300.

First, drive torque:

Type i500 followed by enter. A response like this will display:

Configured drive torque: 500

Now torque:

Type q250 followed by enter. A response like this will display:

Configured reverse torque: 250

Torque calibration is now complete.

At this point it is advised to store the now configured values to EEPROM (non volatile memory) by typing z followed by enter. A response like this will display:

Parameters stored to EEPROM

An option is provided to set the speed in % (0 to 100%) for the electric gearbox oilpump. In this example we set the speed to 50% :

Type v50 followed by enter. A response like this will display:

Configured gearbox oil pump speed: 50

I have found in testing on the E65 that 50% is a good value for keeping oil pressure up , providing cooling etc without running the pump too hard. Your millage may vary.

An option is provided to shift between LOW and HIGH gear in the GS450H gearbox. Shifts are inhibited at MG1 or MG2 speeds above 100rpm for safety at this time.

To select LOW gear type a and press enter. A response like this will display:

LOW Gear Selected

To select HIGH gear type s and press enter. A response like this will display:

HIGH Gear Selected

It is advised to leave HIGH gear selected always at this time until further testing and development has been completed.

Finally, store all parameters to EEPROM once more by typing z and press enter. A response like this will display:

Parameters stored to EEPROM

Selecting Direction.

The firmware supports the use of the IN1 and IN2 pins of the V2 VCU as direction control inputs. Operation is as follows :

If both inputs are unconnected, NEUTRAL is selected. In neutral , no torque commands are transmitted to the inverter regardless of throttle application.

If IN1is connected to +12v , DRIVE is selected. In drive both MG1 and MG2 provide torque in a forward direction to the gearbox output shaft.

If IN2 is connected to +12v , REVERSE is selected. In reverse only MG2 provides torque in a reverse direction to the gearbox output shaft.

Currently this "simple" firmware does not support contactor control. This may be provided in a later version.

WiFi Display.

A wifi web browser based display is provided in order to easily visualise data from the inverter and gearbox.

Once powered, the wifi module will create an open access point with an ssid like ESP-XXXX where XXXX will be a series of letters and numbers.

Connect to this access point with any wifi enabled device (e.g. laptop, tablet, phone etc).

Some modern devices will try to access the internet, not find it, and pop up a warning. Dismiss this and open a web browser.

Type 192.168.4.1 into the address bar and press enter. Again, some modern devices and browsers will complain that it is not a secure connection etc. Just dismiss the warning and proceed.

After a few seconds the web gauge display will appear.

Note that the voltage display is derived from the voltage reported by the inverter and both current (amps) and power (kw) gauges are inoperative as of this release.

You may wish to change the ssid and add a passphrase to the access point. To do this goto : 192.168.4.1/admin

A simple set of dialog boxes will allow the ssid, passphrase and background colour of the gauge display to be set.

==Development History==
V1 - This board was sold tested but also as a bare logic board requiring purchase of your own components and SMD placement and soldering skills. https://www.evbmw.com/index.php/evbmw-webshop/toyota-bare-boards/gs450h-bare-pcb

V2 - A new board source was found to be both high quality and low cost. The boards were redesigned around the inventory of parts available from this supplier. In particular the high cost of populated and soldered boards (10x the price) from the source used to make the v1 boards is so significantly lower on the v2 that there are likely no savings by building and soldering the board yourself. Software is still in development.
==Vendors==
There are currently no vendors who offer support on any aspects of the GS450h VCU.
==Support==
Community support is available on the [https://openinverter.org/forum/viewtopic.php?f=14&t=396 Lexus GS450H VCU Support Thread]

Lexus GS450h Drivetrain

2021-01-21T22:52:03Z

Mdrobnak: Add bolts / gasket info for oil pump

[[File:Inverter connector.png|thumb|GS450h inverter external connector|187x187px]]
The Lexus GS450h VCU is an open source project to repurpose 2006-2012 Lexus GS450h inverters for DIY EV use. It consists of a circuit board and programming that communicates with the original logic board in the inverter and allows independent control of it without communicating with a GS450h ECU.

Note that the Toyota Camry hybrid (US market) uses a similar inverter with the same logic board, which is functionally identical to the GS450h unit.

== GS450h Inverter ==

The Lexus GS450h is a hybrid vehicle. Their inverters are suitable and attractive for DIY EVs because of:
* Good availability and price - an inverter and "transmission" can generally be purchased for less than £/€1000.
* Durability. Toyota engineers appear to have made the inverters foolproof, many inputs and outputs gracefully handle fault conditions.

* Respectable performance. Rated for a combined 250kW output.
* Ease of repurposing. Emulating the original ECU seems reasonably feasible. The transmission is a similar size and layout to many RWD transmissions.
The Lexus GS450h (2006-2012 model years) has a variety of useful components inside the inverter package:
[[File:Toyota Camry Inverter external connector.png|thumb|204x204px|Toyota Camry Inverter external connector]]
* Two high power inverters, for the 2 motors MG1 capable of handling X(?) amps, and MG2 capable of handling Y(?) amps.
* A boost module to boost the 288v battery pack up to 650v as used in the Lexus (Note that voltages this high are not required for EV conversions).

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

The inverter is capable of running at full speeds on pack voltages from approx 280V upwards. The maximum allowable input voltage is 650V, so far, many have found that "standard" EV voltages of 300V-360V to be well suited.

'''Note that even thouigh the inverter maximum voltage rating is 650V, a 650V battery pack is not required to run this unit. It is capable of excellent performance at lower voltages, such as the typical 300V-360V found in most EVs. However, there is the opportunity to use larger packs with this unit if required in your application.'''

Should a higher voltage pack be chosen in your application for any reason, the buck/boost converter can be used to power auxiliary equipment at its native voltage.

== GS450h Converter ==
A buck/boost converter lives within the inverter housing, originally this is used to step up the 288V battery pack in the GS450h to the 650V for use in the inverter in the GS. (Note that this does not mean the inverter requires 650V to run, it is simply a maximum rating) For those using a 600+V battery pack, this converter can be used to step the voltage down to a more reasonable level to interface with charfgers, DCDC converters, heaters, AC compressors, and other components which can be found in "regular" EV's (Tesla, Leaf, Volt, etc).

This unit is rated at 30kW, making it unsuitable for traction power, but good for auxiliary devices.

Details on how to control the converter are here: https://openinverter.org/forum/viewtopic.php?f=14&t=538

For technical analysis of this unit, see pages 14-47 of this document: <nowiki>https://www.osti.gov/servlets/purl/928684</nowiki>

== GS450h Transmission ==
[[File:Inverter.png|thumb|213x213px|GS450h inverter]]
For technical analysis of this transmission, see pages 46 onwards of this document: https://www.osti.gov/servlets/purl/947393

The transmission contains two "Motor-Generator" units. MG1 sits at the front of the transmission, and interfaces with the internal combustion engine through a planetary gear set. For this reason, to obtain torque from MG1, the input shaft of the transmission must be locked in place. This is usually done using a splined coupler, which is then welded onto the transmission front mount.

The input shaft on the transmission has 21 splines, with a 28mm major diameter. It is believed that there are several Toyota clutches which will have this in their centre. The original GS450h flywheel and coupler also contains the appropriate slined centre, of course.

The fluid fill port is the banjo bolt for the upper transmission cooler hose. The specified fluid is "Toyota WS" ATF.

It is a good idea to replace the two bearings in the electric oil pump before fitting a used transmission. There is a guide [http://carlthomas66.blogspot.com/2016/03/lexus-gs450h-transmission-oil-pump.html here]. Bearing part numbers are 61900-2Z and 608-2Z, you will need one of each.

The shift position lever on the right-hand side of the transmission engages the parking pawl when in the "all-the-way-back" position. All other positions disengage this pawl. The R, N, D, M positions only affect the output of the shift position sensor.

Note the following when purchasing the transmission:
[[File:Shift position.png|thumb|154x154px|GS450h shift position sensor]]
* It is recommended to purchase one which has the electric oil pump fitted - these are a costly item as the bearings in them often fail, in some cases they cost more than the transmission.
* It is recommended to purchase a transmission which includes the wiring harness, or at least off-cuts of the connectors. Some connectors may be unavailable for purchase. There is a thread [https://openinverter.org/forum/viewtopic.php?f=14&t=271 here] which covers the connectors on this transmission.

=== Dimensions ===
Overall height (oil pan to top of bellhousing) is 39cm. Bell housing is full height, i.e. 39cm diameter, when the transmission is sitting on its oil pan (as it is on my bench), the bellhousing still just about touches the bench.

Widest point is 40cm, includes a bump for a starter motor which I don't believe the GS450h even has. Likely leftover to mate with the 2GR engine.

Overall length including tailshaft, output flange, and pilot shaft, is 82cm.

Transmission is tapered quite heavily, the width and height is closer to 25cm after the bellhousing, but hard to gauge due to various outcropping parts (motor cables, oil pump, PRNDL selector, etc)

Weight is 128kg. Unknown if this is dry or filled. Likely partially filled. Unknown if this includes oil pump and cables.

The input shaft pokes out 29mm from the general highest point of the back of the bell housing? (e.g. set a 20cm ruler there and measure from it)

The taper at the tip of the shaft before the splines appear fully is 6mm long. (i.e. the length of the tip portion without proper splines)

=== The Oil Pump ===
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oilpump.png|300x300px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Connector - A55 Oil Pump Motor Controller 90980–12483.png|269x269px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oil Pump.png|386x386px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>
<figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline><figure-inline>[[File:Oil Pump2.png|400x400px]]</figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline></figure-inline>

The metal case is the ground.

Black (pin 6) is PWM in from your controller.

Brown (pin 7) is feedback from the oil pump. It's PWM. Do what you want with this or leave it disconnected.

The fat blue wire (pin 5) is 12V power. The oil pump uses around 50A Max. So plan for that. Add your own relay to stop it draining your battery while the car is off.

The PWM for this is weird, it's not just 0-100. IIRC it is 0% at both ends, and rises to 100% near the middle, then back down again. This is just based on the sound of the pump with no load, so needs more testing to find the real values.

Here is a list of compatible Toyota part numbers for the oil pump controller: G1167-30020

== Wiring Harness Connectors ==
Here are a list of connectors required for the GS450h transmission & inverter if you need/wish to build the harness for your build. (It is a good idea to find components with at least the connectors to build on. As some of the connectors are impossible to obtain)
{| class="wikitable"
|+Inverter Connectors
!Connector
!Part No.
!Location
!
|-
|Inverter interface connector (A62)
|90980–12630
|Black connector on the side of the inverter. This connector is not sold anywhere to our knowledge.
|
|}
A good alternative to this, otherwise difficult to obtain, connector is to replace the receptacle/header with the following parts from Molex:
{| class="wikitable"
|+
!Image
!Part No.
!Item
!Quantity
|-
|[[File:036638-0002.jpg|center|frameless|80x80px]]
|036638-0002
|CMC header connector 48pin
|1
|-
|[[File:064320-1311.jpg|center|frameless|80x80px]]
|064320-1311
|CMC receptacle 48pin
|1
|-
|[[File:064320-1301.jpg|center|frameless|80x80px]]
|064320-1301
|CMC wire cap
|1
|-
|[[File:064323-1039.jpg|center|frameless|80x80px]]
|064323-1039
|CP terminal
|4
|-
|[[File:064323-1029.jpg|center|frameless|80x80px]]
|064323-1029
|CP terminal
|32
|-
|[[File:064325-1010.jpg|center|frameless|80x80px]]
|064325-1010
|CMC plug
|8
|-
|[[File:064325-1023.jpg|center|frameless|80x80px]]
|064325-1023
|CMC plug
|4
|}

{| class="wikitable"
|+Transmission Connectors
!Connector
!Part No.
!Location
!
|-
|ECT Solenoid (E83)
|Sumitomo 6189-1092
|Located on the left hand side of the transmission above the oil pan.
|[[File:Sumitomo 6189-1092.jpg|center|frameless|100x100px]]
|-
|Shift Lever Position Sensor (E80)
|Sumitomo 90980-12362
|Located on the right side of the transmission next to the shift lever inhibitor switch.
|[[File:Sumitomo 90980-12362.png|center|frameless|100x100px]]
|-
|MG1 & MG2 Resolver(s) (E81 & E82)
|Sumitomo 6189-1240
|Two connectors located on the left side of the transmission by the bell housing.
|[[File:Sumitomo 6189-1240.jpg|center|frameless|100x100px]]
|}
{| class="wikitable"
|+Oil Pump & Oil Pump Motor Controller
!Connector
!Part No.
!Location
!
|-
|Oil Pump Temperature Sensor
|Sumitomo 6189-0175
|The connector is the small 2-pin connector in the middle of the harness between the oil pump and controller
|
|-
|HVECU -> Oil Pump Controller (A52)
|
|Single large (7-way) connector on the side of the oil pump controller
|
|}

==Oil Pump Hardware==
As per ggeter:
"For those, like me, who didn't get the pump with the transmission unit, here are the part numbers for bolts and (what appears to be a metal) gasket."

Bolts (4) 90080-10197 $2.76 ea

Gasket (1) 35142-30010 $14

==Control Board==
An open-source VCU, designed by Damien Maguire, can be purchased as both partially populated and fully populated and tested boards on his website:

[https://www.evbmw.com/index.php/evbmw-webshop/toyota-partially-built-boards-copy/lexus-gs450h-vcm-partial Lexus GS450H VCM Partially Built]
[[File:Transmission.png|thumb|147x147px|GS450h transmission and oil pump temperature sensor]]
[https://www.evbmw.com/index.php/evbmw-webshop/toyota-built-and-tested-boards/gs450h-vcm-fully-built-and-tested Lexus GS450H VCM Fully Built and Tested]

The VCU is an external unit that will not fit within the GS450h inverter housing. It does not replace the GS450h inverter control board, instead it interfaces with it over USART.

For those who have purchased the fully built board, the mating connectors for the VCU are Molex parts:
* 33472-2002 (Left side, grey in colour)

* 33472-2001 (Right side, black in colour)
* 33012-2002 (Crimp terminals)
* 5810130065 (Enclosure)
For partially populated board, these additional parts are required:
* 5810140011 (Header, 40 Pos)
* 75867-101LF (CONN1, Header for WiFi module)
* 5787834-1 (CONN2, USB 2.0 receptacle)
* TR10S05 (IC10, 5V DC/DC converter)
These parts are available from many electronics distributors.

== VCU Firmware ==
Firmware to run on the VCU is available on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller

This guide relates to V3.01 available here on Github : https://github.com/damienmaguire/Lexus-GS450H-Inverter-Controller/blob/master/Software/gs450h_v3_user.ino

A video tutorial to accompany this guide and firmware is available here :https://vimeo.com/501777258

In order to aid those not familiar with programming, a new firmware with a basic serial interface is now available. This will be the default loaded onto all VCU boards sold on the EVBMW webshop as of 18/01/21.

This firmware is intended as a stop gap measure before a new Openinverter based version with a web based interface becomes available. (expect mid 2021).

Instruction for use :

Connect a USB cable between the VCU and a PC.

Using a serial terminal program of your choice, connect at 115200,8,N,1.

Once connected, type ? and press enter. The following menu should then display :

<nowiki>=========== EVBMW GS450H VCU Version 3.01 ==============</nowiki>

<nowiki>************</nowiki> List of Available Commands ************

? - Print this menu

d - Print received data from inverter

D - Print configuration data

f - Calibrate minimum throttle.

g - Calibrate maximum throttle.

i - Set max drive torque (0-3500) e.g. typing i200 followed by enter sets max drive torque to 200

q - Set max reverse torque (0-3500) e.g. typing q200 followed by enter sets max reverse torque to 200

v - Set gearbox oil pump speed (0-100%) e.g. typing v50 followed by enter sets oil pump to 50% speed

a - Select LOW gear.

s - Select HIGH gear.

z - Save configuration data to EEPROM memory

<nowiki>**************************************************************</nowiki>

The menu system allows for the display of data from both the VCU, GS450H Inverter and gearbox as well as setting of parameters such as throttle calibration and maximum torque.

To select a menu option type its associated character followed by enter.

? Will display the menu.

d Displays data from the inverter in this format :

 0 1 2 3 4 5 6 7 8 9

------------------------------------------------------------------------------

00 | 0 0

10 | 0 0 0 0 0 0 0 0

20 | 0 0 0 0 0 0 0 0 0 0

30 | 0 0 0 0 0 0

40 | 0 0 0 0 0 0 0 0

50 | 0 0 0 0 0

60 |

70 |

80 | 0 0 0 0 0 0

90 | 0 0 0 0 0 0 0 0

MTH Valid: Yes Checksum: 0

DC Bus: ----v

MG1 - Speed: 0rpm Position: 0

MG2 - Speed: 0rpm Position: 0

Water Temp: 0.00c

Inductor Temp: 0.00c

Another Temp: 0c

Another Temp: 0c

D (capital or large D) displays VCU configuration data as well as information on the Gearbox status in this format :

<nowiki>***************************************************************************************************</nowiki>

Throttle Channel 1: 109

Throttle Channel 2: 53

Commanded Torque: 0

Selected Direction: DRIVE

Selected Gear: HIGH

Configured Max Drive Torque: 600

Configured Max Reverse Torque: 300

Configured gearbox oil pump speed: 40

Current valve positions:

PB1:ON

PB2:ON

PB3:ON

MG1 Stator temp: 109.69

MG2 Stator temp: 109.69

<nowiki>***************************************************************************************************</nowiki>

Throttle calibration procedure :

Set your throttle, be it a pedal or potentiometer or other, to the position of desired zero throttle.

Type f and press enter. A response like this will display:

Configured min throttle value: 109

Now press or advance the throttle to the desired position of maximum throttle.

Type g and press enter. A response like this will display:

Configured max throttle value: 633

The throttle calibration is now complete.

Next we want to set the maximum allowed drive and reverse torque values. The GS450H inverter will accept a value of between 0 and 3500 for torque.

for initial bench and vehicle testing it is advisable to limit these to low values. In this example we will set drive torque to 500 and reverse torque to 300.

First, drive torque:

Type i500 followed by enter. A response like this will display:

Configured drive torque: 500

Now torque:

Type q250 followed by enter. A response like this will display:

Configured reverse torque: 250

Torque calibration is now complete.

At this point it is advised to store the now configured values to EEPROM (non volatile memory) by typing z followed by enter. A response like this will display:

Parameters stored to EEPROM

An option is provided to set the speed in % (0 to 100%) for the electric gearbox oilpump. In this example we set the speed to 50% :

Type v50 followed by enter. A response like this will display:

Configured gearbox oil pump speed: 50

I have found in testing on the E65 that 50% is a good value for keeping oil pressure up , providing cooling etc without running the pump too hard. Your millage may vary.

An option is provided to shift between LOW and HIGH gear in the GS450H gearbox. Shifts are inhibited at MG1 or MG2 speeds above 100rpm for safety at this time.

To select LOW gear type a and press enter. A response like this will display:

LOW Gear Selected

To select HIGH gear type s and press enter. A response like this will display:

HIGH Gear Selected

It is advised to leave HIGH gear selected always at this time until further testing and development has been completed.

Finally, store all parameters to EEPROM once more by typing z and press enter. A response like this will display:

Parameters stored to EEPROM

Selecting Direction.

The firmware supports the use of the IN1 and IN2 pins of the V2 VCU as direction control inputs. Operation is as follows :

If both inputs are unconnected, NEUTRAL is selected. In neutral , no torque commands are transmitted to the inverter regardless of throttle application.

If IN1is connected to +12v , DRIVE is selected. In drive both MG1 and MG2 provide torque in a forward direction to the gearbox output shaft.

If IN2 is connected to +12v , REVERSE is selected. In reverse only MG2 provides torque in a reverse direction to the gearbox output shaft.

Currently this "simple" firmware does not support contactor control. This may be provided in a later version.

WiFi Display.

A wifi web browser based display is provided in order to easily visualise data from the inverter and gearbox.

Once powered, the wifi module will create an open access point with an ssid like ESP-XXXX where XXXX will be a series of letters and numbers.

Connect to this access point with any wifi enabled device (e.g. laptop, tablet, phone etc).

Some modern devices will try to access the internet, not find it, and pop up a warning. Dismiss this and open a web browser.

Type 192.168.4.1 into the address bar and press enter. Again, some modern devices and browsers will complain that it is not a secure connection etc. Just dismiss the warning and proceed.

After a few seconds the web gauge display will appear.

Note that the voltage display is derived from the voltage reported by the inverter and both current (amps) and power (kw) gauges are inoperative as of this release.

You may wish to change the ssid and add a passphrase to the access point. To do this goto : 192.168.4.1/admin

A simple set of dialog boxes will allow the ssid, passphrase and background colour of the gauge display to be set.

==Development History==
V1 - This board was sold tested but also as a bare logic board requiring purchase of your own components and SMD placement and soldering skills. https://www.evbmw.com/index.php/evbmw-webshop/toyota-bare-boards/gs450h-bare-pcb

V2 - A new board source was found to be both high quality and low cost. The boards were redesigned around the inventory of parts available from this supplier. In particular the high cost of populated and soldered boards (10x the price) from the source used to make the v1 boards is so significantly lower on the v2 that there are likely no savings by building and soldering the board yourself. Software is still in development.
==Vendors==
There are currently no vendors who offer support on any aspects of the GS450h VCU.
==Support==
Community support is available on the [https://openinverter.org/forum/viewtopic.php?f=14&t=396 Lexus GS450H VCU Support Thread]

Main Page Old

2020-07-06T16:12:08Z

Mdrobnak: Point All control board page to OEM Repurposing

Welcome to the openinverter.org Wiki Site.
Everyone registered at the [https://openinverter.org/forum/index.php forum] can login here with the same username and password and can make changes.

= Before you begin: =
'''Please take the time to read.''' The information provided on this wiki and the support forums is intended as information only. The Open Inverter project and it's contributors take no responsibility for how you use the information contained within these pages, nor any liability for injuries, or death, that may result from your actions.

You undertake '''your''' project at '''your own risk.'''

= Introduction =
The Open Inverter projects consists of a core development project around an open source inverter, a power stage, taking the DC current provided from a battery and converting it to a controlled signal to drive AC and PMSM motors.

The project has also spawned additional projects that take existing OEM Power Stages/Inverters from cars, which having been made in bulk and are now cheaply and readily available, and provides a means of upcycling and taking control of them so they can be used in conversion projects.

There are also additional projects and discussions in the [https://openinverter.org/forum/index.php forums] for components beyond the power stage, such as Battery Management Systems, Motors, Batteries, etc.

Combined these projects and discussions and the community effort on this wiki and on the [https://openinverter.org/forum/index.php forums] aim to make converting existing internal combustion engine (ICE) vehicles, a cheap and easy proposition for individuals, and companies, looking to specialise in converting ICE vehicles.

=== The open inverter project consists of three main aspects: ===
{| class="wikitable"
|+
!Hardware
!Firmware
!Web Interface
|-
|The design and development of the [[Main Board Version 3|control hardware]] based around an STM32F103 chip. This provides the control signals to the power stage and on to the attached components.
|The development of the code that goes on the STM32F103 chips and determines, amongst other things what signals are sent to the power stage and the attached components.
|Using an ESP8266 chip, the development of a simple web based interface to adjust the parameters on the firmware chip and to display values returned from the chip, for example motor speed (RPM).
|}

= Getting Started =
=== Inverter variants available: ===
{| class="wikitable"
|+
!
==== Open Inverter (Core Project) ====
!
!
==== Open Inverter Related Projects / Control Boards ====
|-
|'''This is the kit provided to build your own power section,'''
'''meaning sourcing and constructing your own IGBTs and'''

'''other components.'''

| rowspan="6" |
|'''This is the kit/boards for use with existing power sections,'''
'''meaning inverters sourced from OEM parts taken'''

'''from existing cars, etc. and utilising the components'''

'''within them.'''

|-
| rowspan="3" |
====== Open Inverter Hardware ======
* [[Hardware Theory of Operation]]
* [[Schematics and Instructions]] - for the "vanilla" inverter kit.
* [[Main Board Version 3]]
* [[Main Board Version 2]]
* [[Main Board Version 1]]
* [[Sense Boards]]
* [[Gate Driver]]
* [[Sensor Board|Legacy Sensor Board]]

|'''[[Tesla|Tesla Small Drive and Large Drive Units:]]'''
commonly there is a large drive unit and small drive unit available.

These combine the inverter and motor into a single package. The

control boards for these replace the existing control board within them.

|-
|'''[[Lexus GS450h Inverter|Lexus GS450h Inverter / VCU:]]'''
the GS450h provides a gearbox (where the motors are located)

combined with the original inverter, this board looks to control

the inverter and the gearbox itself to provide a powerful set up

suitable for rear wheel drive set ups, replacing the existing

longitudinally mounted gearbox.

|-
|'''[[Toyota Prius Gen3 Board|Prius Generation 3 Inverter:]]'''
a cheap available inverter from the popular Prius hybrid, this

board goes inside that inverter and allows you to control the features of it.

|-
| rowspan="3" |
====== '''Open Inverter Software''' ======
* [[Using FOC Software]]
* [[Downloads]]
* [[Features]]
* [[Web Interface]]
* [[Battery Charging]]
* [[Errors]]
* [[CAN communication]]
* [[Parameters]] (Tune your inverter)
* [[Configuration Files]]
* [[Software Theory of Operation]]
|'''[[Auris/Yaris Inverter:]]'''
similar to the Prius board, there's subtle differences between them and

therefore the need for a separate board.

|-
|'''[[Nissan Leaf VCU|Nissan Leaf VCM:]]'''
this vehicle control board plugs into the Nissan Leaf inverter externally

and controls it via CAN
|-
|
|[[OEM Repurposing|All Control Boards / OEM Inverters]]
|-
|
|
|
|-
| colspan="3" |
====== CAN communication ======
Common across boards is the ability to communicate with a CAN Bus, which is a 'control area network' or a technical way of saying how various components, sensors, controls, etc communicate with one another within the car. '''Read more about [[CAN communication|CAN Communication]]'''

There is also a project to standardise the messages across the various control boards, [[Introduction CAN STD|read more]]

|-
| colspan="3" |
|-
| colspan="3" |
====== Use inverter as a battery Charger ======
Both the open inverter and some OEM inverters can be used as a battery charger, further saving on component costs. You can read more about how the open inverter and the theory of charging [[Battery Charging|here]]

|}

=== Further Components ===
Once you have the [[Inverters|inverter]], you will need additional components for your EV conversion:
* [[Motors]]
* [[Batteries]]
* [[Charger]]
* [[DC/DC Converter]]
* [[HV Junction Box]]
* Other various components
** Vacuum Pumps
** Heaters
** Air Conditioning
** Information Displays
** etc.

Existing information on these items can be found on the [[EV Conversion Parts]] page.

= FAQs =
* [[Common Inverter FAQ]] - questions common to all hardware variants
* [[Tesla Inverter FAQ]] - questions regarding Tesla Large Drive Units and Small Drive Units

= Open Inverter CAN std. =
* [[Introduction CAN STD|Introduction]]
* [[CAN table CAN STD|CAN table]]
* [[Getting started with CAN bus and an Arduino Uno]]

= Glossary of Terms =
* [[Glossary of Terms]]

= Legalities =
* [[Legalities|Legalities around conversion projects]]
Different countries have different legislation, if you want you car to certified for the road in your country please take the time to review this section.

= Conversion Projects =
* [[VW Polo 86C Conversion]]
* [[Touran Conversion]]
* [https://openinverter.org/forum/viewforum.php?f=11 Further Projects on the forum]

= OEM Parts =
* [[BMW]]
* [[Isabellenhütte Heusler]]
* [[Mercedes]]
* [[Nissan]]
* [[Tesla]]
* [[Toyota]]
* [[Chevrolet]]
* [[Mistubishi]]

Main Page Old

2020-06-03T17:50:56Z

Mdrobnak: Re-org main page again to be a bit more clear about how things are organized with the projects.

Welcome to the openinverter.org Wiki Site.
Everyone registered at the [https://openinverter.org/forum/index.php forum] can login here with the same username and password and can make changes.

= Introduction =
=== The open inverter project consists of three main aspects: ===
{| class="wikitable"
|+
!Hardware
!Firmware
!Web Interface
|-
|The design and development of the [[Main Board Version 3|control hardware]] based around an STM32F103 chip. This provides the control signals to the power stage and on to the attached components.
|The development of the code that goes on the STM32F103 chips and determines, amongst other things what signals are sent to the power stage and the attached components.
|Using an ESP8266 chip, the development of a simple web based interface to adjust the parameters on the firmware chip and to display values returned from the chip, for example motor speed (RPM).
|}

In addition, there are various projects that have been contributed by the Open Inverter community that are not necessarily using the hardware or software from the Open Inverter project, but are greatly helpful in achieving a cost-effective Electric Vehicle (EV) conversion.

= Getting Started =
=== Inverter variants available: ===
{| class="wikitable"
|+
!Kit for use with your own power section
!Kit for use with [[OEM_Repurposing|existing power sections]]
!Open Inverter Related Projects
|-
|This is the kit provided to build your own power section, meaning sourcing and constructing your own IGBTs and other components.

You can find the build instructions for this kit [[Schematics and Instructions|here]]
|This is the kit for use with existing power sections, meaning inverters sourced from OEM parts taken from existing cars, etc. and utilising the components within them.

For example [[OEM_Repurposing#Open Inverter Tesla Boards|Tesla drive unit]], [[OEM_Repurposing#Ford Ranger TIM inverter|Ford Ranger TIM]], [[OEM_Repurposing#Open Inverter Kits|Prius,Nissan Leaf, etc]]
|Various project such as the [[Nissan_Leaf_VCU|Nissan Leaf VCU]], for use with the existing controller (and thus power limits), and the [[Lexus_GS450h_Inverter|Lexus GS450h inverter / VCU]] project for usage in RWD vehicles.
|}

Once you have the inverter parts, you will need additional components for your EV conversion:
* [[EV Conversion Parts#Motors|Motor]]
* [[EV Conversion Parts#Batteries|Batteries]]
* [[EV Conversion Parts#Charger|Charger]]
* DC/DC Converter
* HV Junction Box
* Other various components
** Pumps, Heaters, etc.

More detailed information on these items can be found on the [[EV Conversion Parts]] page.

If you want to tune your inverter check the [[Parameters|parameter description]].

You might also want to set up [[CAN communication|CAN communication]] or use the inverter as a [[Battery Charging|battery charger]] also.

= FAQs =
* [[Common Inverter FAQ]] - questions common to all hardware variants
* [[Tesla Inverter FAQ]] - questions regarding Tesla Large Drive Units and Small Drive Units

= Open Inverter Hardware =
* [[Schematics and Instructions]] - for the "vanilla" inverter kit.
* [[Main Board Version 3]]
* [[Main Board Version 2]]
* [[Main Board Version 1]]
* [[Sense Boards]]
* [[Gate Driver]]
* [[4-cell BMS]]
* [[Hardware Theory of Operation]]
* [[Sensor Board|Legacy Sensor Board]]

= Open Inverter Software =
* [[Using FOC Software]]
* [[Downloads]]
* [[Features]]
* [[Web Interface]]
* [[Battery Charging]]
* [[Errors]]
* [[CAN communication]]
* [[Parameters]]
* [[Configuration Files]]
* [[Software Theory of Operation]]

= Open Inverter CAN std. =
* [[Introduction CAN STD|Introduction]]
* [[CAN table CAN STD|CAN table]]

= Glossary of Terms =
* [[Glossary of Terms]]

= Conversion Projects =
* [[Legalities]]
* [[VW Polo 86C Conversion]]
* [[Touran Conversion]]

= OEM Parts =
* [[BMW]]
* [[Isabellenhütte Heusler]]
* [[Nissan]]
* [[Tesla]]
* [[Toyota]]
* [[Chevrolet]]

Motor List

2020-05-28T22:24:58Z

Mdrobnak: Removed Brushed-DC motors.

= Overview of Motors =

== Detailed specs are available on the respective pages (click the link). If the manufacturer is clickable it should take you to the motor directly. ==

<table cellpadding="2" cellspacing="2">
<tr>
<th style="border: none; padding: 0cm">
Manufacturer
</th>

<th style="border: none; padding: 0cm">
Model
</th>

<th style="border: none; padding: 0cm">
Technology
</th>

<th style="border: none; padding: 0cm">
Layout
</th>

<th style="border: none; padding: 0cm">
L¹[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
W / ⌀²[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
H[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
Weight[http://en.wikipedia.org/wiki/Kilogram [kg]]
</th>

<th style="border: none; padding: 0cm">
RWinding[mΩ]
</th>

<th style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Motor_constants Kv]
</th>

<th style="border: none; padding: 0cm">
Cont. Power³[kW]
</th>

<th style="border: none; padding: 0cm">
Peak Power[kW]
</th>

<th style="border: none; padding: 0cm">
Power/Weight*[kW/ [http://en.wikipedia.org/wiki/Kilogram kg]]
</th>
</tr>

<tr>
<td style="border: none; padding: 0cm">
Various
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/C80100 C80100]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.82
</td>

<td style="border: none; padding: 0cm">
32
</td>

<td style="border: none; padding: 0cm">
130-180
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
1.10
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
Various
</td>

<td style="border: none; padding: 0cm">
[[C8085]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
130-180
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100-model/rv-100-regular/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
104
</td>

<td style="border: none; padding: 0cm">
98
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.7
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
57
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
0.74
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100-model/rv-100-sh/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
96
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
2.5
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
1.25
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100/rv-100pro/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
98
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
49
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
1.00
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120-model/rv-120-regular/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
126
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
4.3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
1.16
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120-model/rv-120-short/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
68
</td>

<td style="border: none; padding: 0cm">
134
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.7
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
2.5
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
0.93
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120/rv-120pro-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
126
</td>

<td style="border: none; padding: 0cm">
127
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
4.8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
43
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
1.25
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-160models/rv-160pro-short-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-160 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
8
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
1.60
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-160models/rv-160pro-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-160 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
122
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
1.50
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.astroflight.com/3210 Astro]
</td>

<td style="border: none; padding: 0cm">
[[3210]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
81
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
0.964
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
275
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
2.07
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.astroflight.com/3220 Astro]
</td>

<td style="border: none; padding: 0cm">
[[3220]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
81
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.814
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
4
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
2.21
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/150100s-sensored-outrunner-brushless-motor-50kv-35000w/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[150100/S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.851
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
35
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/tp100-inrunner-brushless-motor-rc-boat-150kv-23000w/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[TP100]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.360
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/120100sw-sensored-outrunner-brushless-motor-50kv-25000w-water-cooled/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[120100sw]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Water_cooling WC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3.935
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0907.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME0907]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
148
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
104?
</td>

<td style="border: none; padding: 0cm">
3.84
</td>

<td style="border: none; padding: 0cm">
10.56
</td>

<td style="border: none; padding: 0cm">
0.39
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0913.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME0913]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1012.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1012]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
69?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.62
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1114.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1114]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
163
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
253
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
69?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.62
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1115motor.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1115]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
253
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
130
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1117-pmac-motor-24-48v-6-hp-cont-19-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1117]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
14.17
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1118-pmac-motor-24-72v-6-hp-cont-19-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1118]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
10.14
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
14.17
</td>

<td style="border: none; padding: 0cm">
0.44
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1202-brushless-motor-24-72v-5000rpm-10-kw-cont-24-kw-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1202]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
16.47
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.61
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.thunderstruck-ev.com/motenergy-1302-water-cooled-brushless.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1302]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
171
</td>

<td style="border: none; padding: 0cm">
223
</td>

<td style="border: none; padding: 0cm">
252
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12?
</td>

<td style="border: none; padding: 0cm">
30?
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1305-pmac-motor-24-48v-6-hp-cont-15-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1305]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
11.19
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/mepmbrmo.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1507]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
153
</td>

<td style="border: none; padding: 0cm">
220
</td>

<td style="border: none; padding: 0cm">
250
</td>

<td style="border: none; padding: 0cm">
19.96
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
17
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.85
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201012801.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME2801]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.32
</td>

<td style="border: none; padding: 0cm">
14.4
</td>

<td style="border: none; padding: 0cm">
0.43
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013201.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3201]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
111
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013501.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3501]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013601.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3601]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201014201.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME4201]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.32
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.43
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-20-brushless-38hp-liquid-cooled-pmac-motor-24-96v.html EMS]
</td>

<td style="border: none; padding: 0cm">
[[DLC-20]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
68?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-28-brushless-57hp-liquid-cooled-pmac-motor-24-120v.html EMS]
</td>

<td style="border: none; padding: 0cm">
[[DLC-28]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
167
</td>

<td style="border: none; padding: 0cm">
223
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
130
</td>

<td style="border: none; padding: 0cm">
54?
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
38
</td>

<td style="border: none; padding: 0cm">
0.94
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/MHM602 MHM602]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
190
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM602 Dual]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM603]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
190
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM603 Dual]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://endless-sphere.com/forums/viewtopic.php?t=46898&f=31 John in CR]
</td>

<td style="border: none; padding: 0cm">
[[HubMonster]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
15.42
</td>

<td style="border: none; padding: 0cm">
16
</td>

<td style="border: none; padding: 0cm">
18
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.zelenavozila.com/#!cromotor/c1ger Zelena Vozila]
</td>

<td style="border: none; padding: 0cm">
[[Cromotor V2]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
9.3
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
MXUS
</td>

<td style="border: none; padding: 0cm">
[[3000W V3]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
142
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.34
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
8.9
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
0.32
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/The%20Crown.htm Crystalyte]
</td>

<td style="border: none; padding: 0cm">
[[The Crown]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8.98
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
8.8
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
0.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://wholesaler.alibaba.com/product-detail/QS-500W-205-28H-E-bike_60288067257.html QS Motor]
</td>

<td style="border: none; padding: 0cm">
[[205/28H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
244
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8.3
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.06
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
QS Motor
</td>

<td style="border: none; padding: 0cm">
[[205/50H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.75
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
9
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.24
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://wholesaler.alibaba.com/product-detail/QS-4000W-273-40H-E-bike_60278428315.html QS Motor]
</td>

<td style="border: none; padding: 0cm">
[[273/40H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
18.1
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/m2705fd.html Nine Continent]
</td>

<td style="border: none; padding: 0cm">
[[M2705FD]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.16
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
12.5
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/m3004rc.html Nine Continent]
</td>

<td style="border: none; padding: 0cm">
[[M3004RC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
135
</td>

<td style="border: none; padding: 0cm">
230
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.28
</td>

<td style="border: none; padding: 0cm">
82
</td>

<td style="border: none; padding: 0cm">
13.9
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://shop.crystalyte-europe.com/product.php?productid=16445 Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3525]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
135
</td>

<td style="border: none; padding: 0cm">
239
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
6.5
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
0.04
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/h35%20series.htm Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3540]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.37
</td>

<td style="border: none; padding: 0cm">
123
</td>

<td style="border: none; padding: 0cm">
10.4
</td>

<td style="border: none; padding: 0cm">
0.6
</td>

<td style="border: none; padding: 0cm">
1.2
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/h35%20series.htm Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3548]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.73
</td>

<td style="border: none; padding: 0cm">
84
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
0.6
</td>

<td style="border: none; padding: 0cm">
1.2
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/mezee250rc.html eZee]
</td>

<td style="border: none; padding: 0cm">
[[v2 205RPM]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
173
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3.94
</td>

<td style="border: none; padding: 0cm">
55
</td>

<td style="border: none; padding: 0cm">
8.1
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.13
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.szbaf.com/en/components/component/motor/fm-g01250d.html Bafang]
</td>

<td style="border: none; padding: 0cm">
[[FM G01.250.D]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
173
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.68
</td>

<td style="border: none; padding: 0cm">
96
</td>

<td style="border: none; padding: 0cm">
12.7
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
0.09
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.szbaf.com/en/components/component/motor/fm-g32250v.html Bafang]
</td>

<td style="border: none; padding: 0cm">
[[FM G32.250.V]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
131
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
0.10
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.yasamotors.com/products/yasa-400/ YASA Motors]
</td>

<td style="border: none; padding: 0cm">
[[YASA-400]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Oil_cooling OC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
92
</td>

<td style="border: none; padding: 0cm">
300
</td>

<td style="border: none; padding: 0cm">
330
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
2.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.yasamotors.com/products/p400_series/ YASA Motors]
</td>

<td style="border: none; padding: 0cm">
[[YASA-P400S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Oil_cooling OC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
107
</td>

<td style="border: none; padding: 0cm">
305
</td>

<td style="border: none; padding: 0cm">
330?
</td>

<td style="border: none; padding: 0cm">
27
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
60
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-S112]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
125
</td>

<td style="border: none; padding: 0cm">
273
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
19
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-D144]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
271
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-D576]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
271
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.1
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.20
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.4
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.13
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.3
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.69
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.33
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.3
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.28
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.3
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
35
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.85
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
19.9
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.01
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner],
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
1.97
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.46
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268MV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
11.5
</td>

<td style="border: none; padding: 0cm">
8.2
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
2.46
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://store.evtv.me/proddetail.php?prod=brammo Parker]
</td>

<td style="border: none; padding: 0cm">
[[GVM145-2]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
178
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
16
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
41
</td>

<td style="border: none; padding: 0cm">
1.56
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Phi271]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
95
</td>

<td style="border: none; padding: 0cm">
308
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
155
</td>

<td style="border: none; padding: 0cm">
4.5
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Phi27S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
77
</td>

<td style="border: none; padding: 0cm">
308
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
75
</td>

<td style="border: none; padding: 0cm">
3.75
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Ph381]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
115
</td>

<td style="border: none; padding: 0cm">
398
</td>

<td style="border: none; padding: 0cm">
429
</td>

<td style="border: none; padding: 0cm">
38
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
2.37
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Ph382]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
224
</td>

<td style="border: none; padding: 0cm">
398
</td>

<td style="border: none; padding: 0cm">
429
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
180
</td>

<td style="border: none; padding: 0cm">
400
</td>

<td style="border: none; padding: 0cm">
2.31
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-61712.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-6.17.12]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
256
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
51.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
70
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
1.36
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101804.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.04]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
174
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
26
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
1.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101813.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.13]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
256
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
93
</td>

<td style="border: none; padding: 0cm">
156
</td>

<td style="border: none; padding: 0cm">
1.82
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101822.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.22]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
344
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
76
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
220
</td>

<td style="border: none; padding: 0cm">
1.91
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-121813.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-12.18.13]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
280
</td>

<td style="border: none; padding: 0cm">
359
</td>

<td style="border: none; padding: 0cm">
383
</td>

<td style="border: none; padding: 0cm">
52
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
125
</td>

<td style="border: none; padding: 0cm">
1.73
</td>
</tr></table>

<ul>
<li>
¹ without shaft, minimum required dropout width on (bicycle) hubs
</li>

<li>
² if cylindrical
</li>

<li>
³ [http://www.engineeringtoolbox.com/iec-duty-cucles-d_739.html actual S1 or S2 (60 min) rating], in italic text if estimate not supplied by manufacturer, details in specsheet
</li>

<li>
* based on continuous rating
</li>
</ul>
<hr>

Technology

<ul>
<li>
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</li>

<li>
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC] - any waveform
</li>

<li>
[http://en.wikipedia.org/wiki/Water_cooling WC] = water cooling
</li>

<li>
[http://en.wikipedia.org/wiki/Oil_cooling OC] = oil cooling
</li>

<li>
[http://en.wikipedia.org/wiki/Hall_effect_sensor H] = built in Hall sensors
</li>

<li>
[http://en.wikipedia.org/wiki/Resolver_(electrical) S] = built in sin/cos encoder
</li>
</ul>

Layout

<ul>
<li>
[https://endless-sphere.com/w/index.php/Hub_motor Hub], optionally geared (⚙⚙) and/or B for bicycle (if designed to have a sprocket mounted)
</li>

<li>
[http://en.wikipedia.org/wiki/Inrunner Inrunner], optionally [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG] for Axial Gap ("Pancake Style", AKA as Axial Flux)
</li>

<li>
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</li>
</ul>
<hr>

Note: this page is discussed on [http://endless-sphere.com/forums/viewtopic.php?f=30&t=69970 Motor selection: sortable table in the Wiki]

<ul>
<li>
Use [https://endless-sphere.com/w/index.php/Motor_Specsheet_Template Motor Specsheet Template] to copy and paste from when you create a detailed Specsheet from a red link

</ul>

Motor List

2020-05-28T20:13:30Z

Mdrobnak: Totally clean it up.

= Overview of Motors =

== Detailed specs are available on the respective pages (click the link). If the manufacturer is clickable it should take you to the motor directly. ==

<table cellpadding="2" cellspacing="2">
<tr>
<th style="border: none; padding: 0cm">
Manufacturer
</th>

<th style="border: none; padding: 0cm">
Model
</th>

<th style="border: none; padding: 0cm">
Technology
</th>

<th style="border: none; padding: 0cm">
Layout
</th>

<th style="border: none; padding: 0cm">
L¹[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
W / ⌀²[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
H[http://en.wikipedia.org/wiki/Millimeter [mm]]
</th>

<th style="border: none; padding: 0cm">
Weight[http://en.wikipedia.org/wiki/Kilogram [kg]]
</th>

<th style="border: none; padding: 0cm">
RWinding[mΩ]
</th>

<th style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Motor_constants Kv]
</th>

<th style="border: none; padding: 0cm">
Cont. Power³[kW]
</th>

<th style="border: none; padding: 0cm">
Peak Power[kW]
</th>

<th style="border: none; padding: 0cm">
Power/Weight*[kW/ [http://en.wikipedia.org/wiki/Kilogram kg]]
</th>
</tr>

<tr>
<td style="border: none; padding: 0cm">
Various
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/C80100 C80100]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.82
</td>

<td style="border: none; padding: 0cm">
32
</td>

<td style="border: none; padding: 0cm">
130-180
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
1.10
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
Various
</td>

<td style="border: none; padding: 0cm">
[[C8085]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
130-180
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100-model/rv-100-regular/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
104
</td>

<td style="border: none; padding: 0cm">
98
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.7
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
57
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
0.74
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100-model/rv-100-sh/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
96
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
2.5
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
1.25
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-100/rv-100pro/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-100 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
98
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
49
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
1.00
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120-model/rv-120-regular/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
126
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
4.3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
1.16
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120-model/rv-120-short/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
68
</td>

<td style="border: none; padding: 0cm">
134
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.7
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
2.5
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
0.93
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-120/rv-120pro-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-120 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
126
</td>

<td style="border: none; padding: 0cm">
127
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
4.8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
43
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
1.25
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-160models/rv-160pro-short-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-160 short]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
8
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
1.60
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.revolt.org.il/rv-160models/rv-160pro-2/ Revolt]
</td>

<td style="border: none; padding: 0cm">
[[RV-160 Pro]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
122
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
1.50
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.astroflight.com/3210 Astro]
</td>

<td style="border: none; padding: 0cm">
[[3210]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
81
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
0.964
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
275
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
2.07
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.astroflight.com/3220 Astro]
</td>

<td style="border: none; padding: 0cm">
[[3220]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
81
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
1.814
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
4
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
2.21
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/150100s-sensored-outrunner-brushless-motor-50kv-35000w/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[150100/S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.851
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
35
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/tp100-inrunner-brushless-motor-rc-boat-150kv-23000w/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[TP100]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.360
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://alienpowersystem.com/shop/brushless-motors/120100sw-sensored-outrunner-brushless-motor-50kv-25000w-water-cooled/ Alien]
</td>

<td style="border: none; padding: 0cm">
[[120100sw]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Water_cooling WC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3.935
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0907.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME0907]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
148
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
104?
</td>

<td style="border: none; padding: 0cm">
3.84
</td>

<td style="border: none; padding: 0cm">
10.56
</td>

<td style="border: none; padding: 0cm">
0.39
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0913.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME0913]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1012.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1012]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
69?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.62
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1114.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1114]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
163
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
253
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
69?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.62
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me1115motor.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1115]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
182
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
253
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
130
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1117-pmac-motor-24-48v-6-hp-cont-19-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1117]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
14.17
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1118-pmac-motor-24-72v-6-hp-cont-19-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1118]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
10.14
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
14.17
</td>

<td style="border: none; padding: 0cm">
0.44
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1202-brushless-motor-24-72v-5000rpm-10-kw-cont-24-kw-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1202]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
16.47
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
0.61
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.thunderstruck-ev.com/motenergy-1302-water-cooled-brushless.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1302]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
171
</td>

<td style="border: none; padding: 0cm">
223
</td>

<td style="border: none; padding: 0cm">
252
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
52?
</td>

<td style="border: none; padding: 0cm">
12?
</td>

<td style="border: none; padding: 0cm">
30?
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1305-pmac-motor-24-48v-6-hp-cont-15-hp-pk.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1305]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
203
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.47
</td>

<td style="border: none; padding: 0cm">
11.19
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/mepmbrmo.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME1507]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
153
</td>

<td style="border: none; padding: 0cm">
220
</td>

<td style="border: none; padding: 0cm">
250
</td>

<td style="border: none; padding: 0cm">
19.96
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
17
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.85
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201012801.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME2801]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.32
</td>

<td style="border: none; padding: 0cm">
14.4
</td>

<td style="border: none; padding: 0cm">
0.43
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013201.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3201]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
111
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013501.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3501]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.8
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201013601.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME3601]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
110
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.motenergy.com/me0201014201.html Motenergy]
</td>

<td style="border: none; padding: 0cm">
[[ME4201]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
201
</td>

<td style="border: none; padding: 0cm">
212
</td>

<td style="border: none; padding: 0cm">
9.98
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
4.32
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.43
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-20-brushless-38hp-liquid-cooled-pmac-motor-24-96v.html EMS]
</td>

<td style="border: none; padding: 0cm">
[[DLC-20]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
65
</td>

<td style="border: none; padding: 0cm">
68?
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
0.76
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-28-brushless-57hp-liquid-cooled-pmac-motor-24-120v.html EMS]
</td>

<td style="border: none; padding: 0cm">
[[DLC-28]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
167
</td>

<td style="border: none; padding: 0cm">
223
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
15.88
</td>

<td style="border: none; padding: 0cm">
130
</td>

<td style="border: none; padding: 0cm">
54?
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
38
</td>

<td style="border: none; padding: 0cm">
0.94
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/MHM602 MHM602]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
190
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM602 Dual]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM603]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
190
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
30
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enertrac.net/product.php EnerTrac]
</td>

<td style="border: none; padding: 0cm">
[[MHM603 Dual]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://endless-sphere.com/forums/viewtopic.php?t=46898&f=31 John in CR]
</td>

<td style="border: none; padding: 0cm">
[[HubMonster]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub]
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
15.42
</td>

<td style="border: none; padding: 0cm">
16
</td>

<td style="border: none; padding: 0cm">
18
</td>

<td style="border: none; padding: 0cm">
7
</td>

<td style="border: none; padding: 0cm">
23
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.zelenavozila.com/#!cromotor/c1ger Zelena Vozila]
</td>

<td style="border: none; padding: 0cm">
[[Cromotor V2]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
9.3
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.45
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
MXUS
</td>

<td style="border: none; padding: 0cm">
[[3000W V3]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
142
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
9.34
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
8.9
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
6
</td>

<td style="border: none; padding: 0cm">
0.32
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/The%20Crown.htm Crystalyte]
</td>

<td style="border: none; padding: 0cm">
[[The Crown]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8.98
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
8.8
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
5
</td>

<td style="border: none; padding: 0cm">
0.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://wholesaler.alibaba.com/product-detail/QS-500W-205-28H-E-bike_60288067257.html QS Motor]
</td>

<td style="border: none; padding: 0cm">
[[205/28H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
140
</td>

<td style="border: none; padding: 0cm">
244
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8.3
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.06
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
QS Motor
</td>

<td style="border: none; padding: 0cm">
[[205/50H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
247
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.75
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
9
</td>

<td style="border: none; padding: 0cm">
3
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.24
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://wholesaler.alibaba.com/product-detail/QS-4000W-273-40H-E-bike_60278428315.html QS Motor]
</td>

<td style="border: none; padding: 0cm">
[[273/40H]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
150
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
18.1
</td>

<td style="border: none; padding: 0cm">
?
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/m2705fd.html Nine Continent]
</td>

<td style="border: none; padding: 0cm">
[[M2705FD]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.16
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
12.5
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/m3004rc.html Nine Continent]
</td>

<td style="border: none; padding: 0cm">
[[M3004RC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
135
</td>

<td style="border: none; padding: 0cm">
230
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.28
</td>

<td style="border: none; padding: 0cm">
82
</td>

<td style="border: none; padding: 0cm">
13.9
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://shop.crystalyte-europe.com/product.php?productid=16445 Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3525]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
135
</td>

<td style="border: none; padding: 0cm">
239
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
6.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
6.5
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
2
</td>

<td style="border: none; padding: 0cm">
0.04
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/h35%20series.htm Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3540]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.37
</td>

<td style="border: none; padding: 0cm">
123
</td>

<td style="border: none; padding: 0cm">
10.4
</td>

<td style="border: none; padding: 0cm">
0.6
</td>

<td style="border: none; padding: 0cm">
1.2
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.crystalyte.com/h35%20series.htm Crystalite]
</td>

<td style="border: none; padding: 0cm">
[[H3548]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
105
</td>

<td style="border: none; padding: 0cm">
232
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
7.73
</td>

<td style="border: none; padding: 0cm">
84
</td>

<td style="border: none; padding: 0cm">
13
</td>

<td style="border: none; padding: 0cm">
0.6
</td>

<td style="border: none; padding: 0cm">
1.2
</td>

<td style="border: none; padding: 0cm">
0.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.ebikes.ca/shop/ebike-parts/motors/mezee250rc.html eZee]
</td>

<td style="border: none; padding: 0cm">
[[v2 205RPM]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
173
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
3.94
</td>

<td style="border: none; padding: 0cm">
55
</td>

<td style="border: none; padding: 0cm">
8.1
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
0.13
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.szbaf.com/en/components/component/motor/fm-g01250d.html Bafang]
</td>

<td style="border: none; padding: 0cm">
[[FM G01.250.D]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
173
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.68
</td>

<td style="border: none; padding: 0cm">
96
</td>

<td style="border: none; padding: 0cm">
12.7
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
0.09
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.szbaf.com/en/components/component/motor/fm-g32250v.html Bafang]
</td>

<td style="border: none; padding: 0cm">
[[FM G32.250.V]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>

<td style="border: none; padding: 0cm">
[https://endless-sphere.com/w/index.php/Hub_motor Hub], [http://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙], [http://en.wikipedia.org/wiki/Bicycle_gearing B]
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
131
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
2.4
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.25
</td>

<td style="border: none; padding: 0cm">
0.5
</td>

<td style="border: none; padding: 0cm">
0.10
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.saiettaengineering.com/motors/ Agni/Saietta]
</td>

<td style="border: none; padding: 0cm">
[[95-R]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
12.8
</td>

<td style="border: none; padding: 0cm">
21.7
</td>

<td style="border: none; padding: 0cm">
1.16
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.saiettaengineering.com/motors/ Agni/Saietta]
</td>

<td style="border: none; padding: 0cm">
[[119]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
10.9
</td>

<td style="border: none; padding: 0cm">
20.6
</td>

<td style="border: none; padding: 0cm">
0.99
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.saiettaengineering.com/motors/ Agni/Saietta]
</td>

<td style="border: none; padding: 0cm">
[[119-R]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
13.2
</td>

<td style="border: none; padding: 0cm">
25.2
</td>

<td style="border: none; padding: 0cm">
1.20
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-170 D127]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
130
</td>

<td style="border: none; padding: 0cm">
206?
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
8.5
</td>

<td style="border: none; padding: 0cm">
21
</td>

<td style="border: none; padding: 0cm">
62
</td>

<td style="border: none; padding: 0cm">
7.10
</td>

<td style="border: none; padding: 0cm">
21
</td>

<td style="border: none; padding: 0cm">
0.84
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-200 95]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
21.5
</td>

<td style="border: none; padding: 0cm">
81
</td>

<td style="border: none; padding: 0cm">
10
</td>

<td style="border: none; padding: 0cm">
18
</td>

<td style="border: none; padding: 0cm">
0.91
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-200 D95B]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
20.5
</td>

<td style="border: none; padding: 0cm">
76
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
28.5
</td>

<td style="border: none; padding: 0cm">
1.36
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-200 D127]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
17.5
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
12.56
</td>

<td style="border: none; padding: 0cm">
25.38
</td>

<td style="border: none; padding: 0cm">
1.14
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-200 D135]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
16.75
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
14.39
</td>

<td style="border: none; padding: 0cm">
29.04
</td>

<td style="border: none; padding: 0cm">
1.31
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://lynchmotors.co.uk/generators-motors_generators.html Lynch]
</td>

<td style="border: none; padding: 0cm">
[[LEM-200 D135RAGS]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
137
</td>

<td style="border: none; padding: 0cm">
206
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
11
</td>

<td style="border: none; padding: 0cm">
16.95
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
18.00
</td>

<td style="border: none; padding: 0cm">
36.00
</td>

<td style="border: none; padding: 0cm">
1.63
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.yasamotors.com/products/yasa-400/ YASA Motors]
</td>

<td style="border: none; padding: 0cm">
[[YASA-400]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Oil_cooling OC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
92
</td>

<td style="border: none; padding: 0cm">
300
</td>

<td style="border: none; padding: 0cm">
330
</td>

<td style="border: none; padding: 0cm">
24
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
165
</td>

<td style="border: none; padding: 0cm">
2.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.yasamotors.com/products/p400_series/ YASA Motors]
</td>

<td style="border: none; padding: 0cm">
[[YASA-P400S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Oil_cooling OC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
107
</td>

<td style="border: none; padding: 0cm">
305
</td>

<td style="border: none; padding: 0cm">
330?
</td>

<td style="border: none; padding: 0cm">
27
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
60
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.22
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-S112]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
125
</td>

<td style="border: none; padding: 0cm">
273
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
15
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
19
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-D144]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
271
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]
</td>

<td style="border: none; padding: 0cm">
[[ELMO-D576]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S?]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
271
</td>

<td style="border: none; padding: 0cm">
260
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
 ?
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.1
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.20
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.4
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.13
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-200.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 208LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
85
</td>

<td style="border: none; padding: 0cm">
207
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
9.3
</td>

<td style="border: none; padding: 0cm">
0.8
</td>

<td style="border: none; padding: 0cm">
58
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
80
</td>

<td style="border: none; padding: 0cm">
2.69
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.33
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.3
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.28
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 228LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
86
</td>

<td style="border: none; padding: 0cm">
228
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
12.3
</td>

<td style="border: none; padding: 0cm">
1.12
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
35
</td>

<td style="border: none; padding: 0cm">
100
</td>

<td style="border: none; padding: 0cm">
2.85
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-AC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
19.9
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.01
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-LC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner],
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
40
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
1.97
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268LV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
1.7
</td>

<td style="border: none; padding: 0cm">
22.2
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
160
</td>

<td style="border: none; padding: 0cm">
2.46
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.enstroj.si/Electric-products/emrax-268.html Enstroj]
</td>

<td style="border: none; padding: 0cm">
[[EMRAX 268MV-CC]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</td>

<td style="border: none; padding: 0cm">
91
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
20.3
</td>

<td style="border: none; padding: 0cm">
11.5
</td>

<td style="border: none; padding: 0cm">
8.2
</td>

<td style="border: none; padding: 0cm">
50
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
2.46
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://store.evtv.me/proddetail.php?prod=brammo Parker]
</td>

<td style="border: none; padding: 0cm">
[[GVM145-2]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
254
</td>

<td style="border: none; padding: 0cm">
178
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
16
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
25
</td>

<td style="border: none; padding: 0cm">
41
</td>

<td style="border: none; padding: 0cm">
1.56
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Phi271]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
95
</td>

<td style="border: none; padding: 0cm">
308
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
20
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
155
</td>

<td style="border: none; padding: 0cm">
4.5
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Phi27S]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
77
</td>

<td style="border: none; padding: 0cm">
308
</td>

<td style="border: none; padding: 0cm">
317
</td>

<td style="border: none; padding: 0cm">
12
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
45
</td>

<td style="border: none; padding: 0cm">
75
</td>

<td style="border: none; padding: 0cm">
3.75
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Ph381]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
115
</td>

<td style="border: none; padding: 0cm">
398
</td>

<td style="border: none; padding: 0cm">
429
</td>

<td style="border: none; padding: 0cm">
38
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
200
</td>

<td style="border: none; padding: 0cm">
2.37
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]
</td>

<td style="border: none; padding: 0cm">
[[Ph382]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner], [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
</td>

<td style="border: none; padding: 0cm">
224
</td>

<td style="border: none; padding: 0cm">
398
</td>

<td style="border: none; padding: 0cm">
429
</td>

<td style="border: none; padding: 0cm">
78
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
180
</td>

<td style="border: none; padding: 0cm">
400
</td>

<td style="border: none; padding: 0cm">
2.31
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-61712.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-6.17.12]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
256
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
51.5
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
70
</td>

<td style="border: none; padding: 0cm">
120
</td>

<td style="border: none; padding: 0cm">
1.36
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101804.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.04]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
174
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
26
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
28
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
1.08
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101813.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.13]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
256
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
51
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
93
</td>

<td style="border: none; padding: 0cm">
156
</td>

<td style="border: none; padding: 0cm">
1.82
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101822.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-10.18.22]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
344
</td>

<td style="border: none; padding: 0cm">
292
</td>

<td style="border: none; padding: 0cm">
328
</td>

<td style="border: none; padding: 0cm">
76
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
145
</td>

<td style="border: none; padding: 0cm">
220
</td>

<td style="border: none; padding: 0cm">
1.91
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.brusa.biz/en/products/drive/motor-400-v/hsm1-121813.html BRUSA]
</td>

<td style="border: none; padding: 0cm">
[[HSM1-12.18.13]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC], [http://en.wikipedia.org/wiki/Resolver_(electrical) S], [http://en.wikipedia.org/wiki/Water_cooling WC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
280
</td>

<td style="border: none; padding: 0cm">
359
</td>

<td style="border: none; padding: 0cm">
383
</td>

<td style="border: none; padding: 0cm">
52
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
90
</td>

<td style="border: none; padding: 0cm">
125
</td>

<td style="border: none; padding: 0cm">
1.73
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[http://www.cn-dcmotor.com/en/ProductShow.asp?id=136 Shenzen Unite]
</td>

<td style="border: none; padding: 0cm">
[[1020G]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
151
</td>

<td style="border: none; padding: 0cm">
108
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
5.1
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
1
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
0.20
</td>
</tr>

<tr>
<td style="border: none; padding: 0cm">
[https://kostov-motors.com/ev-motors/mtr-00333/ Kostov]
</td>

<td style="border: none; padding: 0cm">
[[K10]]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</td>

<td style="border: none; padding: 0cm">
[http://en.wikipedia.org/wiki/Inrunner Inrunner]
</td>

<td style="border: none; padding: 0cm">
376
</td>

<td style="border: none; padding: 0cm">
268
</td>

<td style="border: none; padding: 0cm">
-
</td>

<td style="border: none; padding: 0cm">
69
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
 ?
</td>

<td style="border: none; padding: 0cm">
31.6
</td>

<td style="border: none; padding: 0cm">
60
</td>

<td style="border: none; padding: 0cm">
0.46
</td>
</tr>
</table>

<ul>
<li>
¹ without shaft, minimum required dropout width on (bicycle) hubs
</li>

<li>
² if cylindrical
</li>

<li>
³ [http://www.engineeringtoolbox.com/iec-duty-cucles-d_739.html actual S1 or S2 (60 min) rating], in italic text if estimate not supplied by manufacturer, details in specsheet
</li>

<li>
* based on continuous rating
</li>
</ul>
<hr>

Technology

<ul>
<li>
[http://en.wikipedia.org/wiki/Brushed_DC_electric_motor Brushed DC]
</li>

<li>
[http://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC] - any waveform
</li>

<li>
[http://en.wikipedia.org/wiki/Water_cooling WC] = water cooling
</li>

<li>
[http://en.wikipedia.org/wiki/Oil_cooling OC] = oil cooling
</li>

<li>
[http://en.wikipedia.org/wiki/Hall_effect_sensor H] = built in Hall sensors
</li>

<li>
[http://en.wikipedia.org/wiki/Resolver_(electrical) S] = built in sin/cos encoder
</li>
</ul>

Layout

<ul>
<li>
[https://endless-sphere.com/w/index.php/Hub_motor Hub], optionally geared (⚙⚙) and/or B for bicycle (if designed to have a sprocket mounted)
</li>

<li>
[http://en.wikipedia.org/wiki/Inrunner Inrunner], optionally [http://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG] for Axial Gap ("Pancake Style", AKA as Axial Flux)
</li>

<li>
[http://en.wikipedia.org/wiki/Outrunner Outrunner]
</li>
</ul>
<hr>

Note: this page is discussed on [http://endless-sphere.com/forums/viewtopic.php?f=30&t=69970 Motor selection: sortable table in the Wiki]

<ul>
<li>
Use [https://endless-sphere.com/w/index.php/Motor_Specsheet_Template Motor Specsheet Template] to copy and paste from when you create a detailed Specsheet from a red link

</ul>

Main Page Old

2020-05-27T19:07:43Z

Mdrobnak: Made it more explicit for the re-purposed OEM hardware.

Welcome to the openinverter.org Wiki Site.
Everyone registered at the [https://openinverter.org/forum/index.php forum] can login here with the same username and password and can make changes.

= Getting Started =

=== The open inverter project consists of three main aspects: ===
{| class="wikitable"
|+
!Hardware
!Firmware
!Web Interface
|-
|The design and development of the [[Main Board Version 3|control hardware]] based around an STM32F103 chip. This provides the control signals to the power stage and on to the attached components.
|The development of the code that goes on the STM32F103 chips and determines, amongst other things what signals are sent to the power stage and the attached components.
|Using an ESP8266 chip, the development of a simple web based interface to adjust the parameters on the firmware chip and to display values returned from the chip, for example motor speed (RPM).
|}

=== There are two variants available: ===
{| class="wikitable"
|+
!Kit for use with your own power section.
!Kit for use with [[OEM_Repurposing|existing power sections]],
|-
|This is the kit provided to build your own power section, meaning sourcing and constructing your own IGBTs and other components.

You can find the build instructions for this kit [[Schematics and Instructions|here]]
|This is the kit for use with existing power sections, meaning inverters sourced from OEM parts taken from existing cars, etc. and utilising the components within them.

For example [[OEM_Repurposing#Open Inverter Tesla Boards|Tesla drive unit]], [[OEM_Repurposing#Ford Ranger TIM inverter|Ford Ranger TIM]], [[OEM_Repurposing#Open Inverter Kits|Lexus GS450h,Prius,Nissan Leaf, etc]]
|}

Once you have the inverter parts, you will need additional components for your EV conversion:
* [[EV Conversion Parts#Motors|Motor]]
* [[EV Conversion Parts#Batteries|Batteries]]
* [[EV Conversion Parts#Charger|Charger]]
* DC/DC Converter
* HV Junction Box
* Other various components
** Pumps, Heaters, etc.

More detailed information on these items can be found on the [[EV Conversion Parts]] page.

If you want to tune your inverter check the [[Parameters|parameter description]].

You might also want to set up [[CAN communication|CAN communication]] or use the inverter as a [[Battery Charging|battery charger]] also.

= FAQs =
* [[Common Inverter FAQ]] - questions common to all hardware variants
* [[Tesla Inverter FAQ]] - questions regarding Tesla Large Drive Units and Small Drive Units

= Open Inverter Hardware =
* [[Schematics and Instructions]] - for the "vanilla" inverter kit.
* [[Main Board Version 3]]
* [[Main Board Version 2]]
* [[Main Board Version 1]]
* [[Sense Boards]]
* [[Gate Driver]]
* [[4-cell BMS]]
* [[Hardware Theory of Operation]]
* [[Sensor Board|Legacy Sensor Board]]

= Open Inverter Software =
* [[Using FOC Software]]
* [[Downloads]]
* [[Features]]
* [[Web Interface]]
* [[Battery Charging]]
* [[Errors]]
* [[CAN communication]]
* [[Parameters]]
* [[Configuration Files]]
* [[Software Theory of Operation]]

= Open Inverter CAN std. =
* [[Introduction CAN STD|Introduction]]
* [[CAN table CAN STD|CAN table]]

= Glossary of Terms =
* [[Glossary of Terms]]

= Conversion Projects =
* [[Legalities]]
* [[VW Polo 86C Conversion]]
* [[Touran Conversion]]

= OEM Parts =
* [[BMW]]
* [[Isabellenhütte Heusler]]
* [[Nissan]]
* [[Tesla]]
* [[Toyota]]
* [[Chevrolet]]

Motor List

2020-05-27T06:08:58Z

Mdrobnak: Attempt to fix the table a bit.

= Overview of Motors =

== Detailed specs are available on the respective pages (click the link). If the manufacturer is clickable it should take you to the motor directly. ==

<table cellpadding="2" cellspacing="2">
<tr>
<th style="border: none; padding: 0cm">Manufacturer

</th>
<th style="border: none; padding: 0cm">Model

</th>
<th style="border: none; padding: 0cm">Technology

</th>
<th style="border: none; padding: 0cm">Layout

</th>
<th style="border: none; padding: 0cm">L¹[https://web.archive.orghttp://en.wikipedia.org/wiki/Millimeter [mm]]

</th>
<th style="border: none; padding: 0cm">W / ⌀²[https://web.archive.orghttp://en.wikipedia.org/wiki/Millimeter [mm]]

</th>
<th style="border: none; padding: 0cm">H[https://web.archive.orghttp://en.wikipedia.org/wiki/Millimeter [mm]]

</th>
<th style="border: none; padding: 0cm">Weight[https://web.archive.orghttp://en.wikipedia.org/wiki/Kilogram [kg]]

</th>
<th style="border: none; padding: 0cm">RWinding[mΩ]

</th>
<th style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Motor_constants Kv]

</th>
<th style="border: none; padding: 0cm">Cont. Power³[kW]

</th>
<th style="border: none; padding: 0cm">Peak Power[kW]

</th>
<th style="border: none; padding: 0cm">Power/Weight*[kW/[http://en.wikipedia.org/wiki/Kilogram kg]]

</th>
</tr>
<tr>
<td style="border: none; padding: 0cm">Various

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/C80100 C80100]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">80

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">1.82

</td>
<td style="border: none; padding: 0cm">32

</td>
<td style="border: none; padding: 0cm">130-180

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm">7
</td>
<td style="border: none; padding: 0cm">1.10

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">Various

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=C8085&action=edit&redlink=1 C8085]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">80

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">1.4

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">130-180

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">6
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[http://www.revolt.org.il/rv-100-model/rv-100-regular/ Revolt]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=RV-100&action=edit&redlink=1 RV-100]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">104

</td>
<td style="border: none; padding: 0cm">98

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2.7

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">57

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm">5
</td>
<td style="border: none; padding: 0cm">0.74

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-100-model/rv-100-sh/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-100_short&action=edit&redlink=1">RV-100
short</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">78

</td>
<td style="border: none; padding: 0cm">96

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">78

</td>
<td style="border: none; padding: 0cm">2.5

</td>
<td style="border: none; padding: 0cm">5
</td>
<td style="border: none; padding: 0cm">1.25

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-100/rv-100pro/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-100_Pro&action=edit&redlink=1">RV-100
Pro</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">110

</td>
<td style="border: none; padding: 0cm">98

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">3

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">49

</td>
<td style="border: none; padding: 0cm">3

</td>
<td style="border: none; padding: 0cm">6
</td>
<td style="border: none; padding: 0cm">1.00

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-120-model/rv-120-regular/ Revolt]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=RV-120&action=edit&redlink=1 RV-120]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">105

</td>
<td style="border: none; padding: 0cm">126

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">4.3

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">45

</td>
<td style="border: none; padding: 0cm">5

</td>
<td style="border: none; padding: 0cm">10
</td>
<td style="border: none; padding: 0cm">1.16

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-120-model/rv-120-short/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-120_short&action=edit&redlink=1">RV-120
short</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">68

</td>
<td style="border: none; padding: 0cm">134

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2.7

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">40

</td>
<td style="border: none; padding: 0cm">2.5

</td>
<td style="border: none; padding: 0cm">6
</td>
<td style="border: none; padding: 0cm">0.93

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-120/rv-120pro-2/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-120_Pro&action=edit&redlink=1">RV-120
Pro</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">126

</td>
<td style="border: none; padding: 0cm">127

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">4.8

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">43

</td>
<td style="border: none; padding: 0cm">6

</td>
<td style="border: none; padding: 0cm">15
</td>
<td style="border: none; padding: 0cm">1.25

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-160models/rv-160pro-short-2/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-160_short&action=edit&redlink=1">RV-160
short</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">165

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">5

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">45

</td>
<td style="border: none; padding: 0cm">8

</td>
<td style="border: none; padding: 0cm">15
</td>
<td style="border: none; padding: 0cm">1.60

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.revolt.org.il/rv-160models/rv-160pro-2/ Revolt]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=RV-160_Pro&action=edit&redlink=1">RV-160
Pro</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">122

</td>
<td style="border: none; padding: 0cm">165

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">8

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">45

</td>
<td style="border: none; padding: 0cm">12

</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm">1.50

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.astroflight.com/3210 Astro]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=3210&action=edit&redlink=1 3210]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">51

</td>
<td style="border: none; padding: 0cm">81

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">0.964

</td>
<td style="border: none; padding: 0cm">30

</td>
<td style="border: none; padding: 0cm">275

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm">3
</td>
<td style="border: none; padding: 0cm">2.07

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.astroflight.com/3220 Astro]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=3220&action=edit&redlink=1 3220]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">86

</td>
<td style="border: none; padding: 0cm">81

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">1.814

</td>
<td style="border: none; padding: 0cm">50

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">4

</td>
<td style="border: none; padding: 0cm">6
</td>
<td style="border: none; padding: 0cm">2.21

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://alienpowersystem.com/shop/brushless-motors/150100s-sensored-outrunner-brushless-motor-50kv-35000w/ Alien]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=150100/S&action=edit&redlink=1 150100/S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">150

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">7.851

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">50

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">35
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://alienpowersystem.com/shop/brushless-motors/tp100-inrunner-brushless-motor-rc-boat-150kv-23000w/ Alien]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=TP100&action=edit&redlink=1 TP100]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">100
</td>
<td style="border: none; padding: 0cm">105

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2.360

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">150

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">23
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://alienpowersystem.com/shop/brushless-motors/120100sw-sensored-outrunner-brushless-motor-50kv-25000w-water-cooled/ Alien]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=120100sw&action=edit&redlink=1 120100sw]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">120

</td>
<td style="border: none; padding: 0cm">120

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">3.935

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">150

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">23
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0907.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME0907&action=edit&redlink=1 ME0907]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">148

</td>
<td style="border: none; padding: 0cm">201

</td>
<td style="border: none; padding: 0cm">212

</td>
<td style="border: none; padding: 0cm">9.98

</td>
<td style="border: none; padding: 0cm">13

</td>
<td style="border: none; padding: 0cm">104?

</td>
<td style="border: none; padding: 0cm">3.84

</td>
<td style="border: none; padding: 0cm">10.56
</td>
<td style="border: none; padding: 0cm">0.39

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0913.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME0913&action=edit&redlink=1 ME0913]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">182

</td>
<td style="border: none; padding: 0cm">200

</td>
<td style="border: none; padding: 0cm">247

</td>
<td style="border: none; padding: 0cm">15.88
</td>
<td style="border: none; padding: 0cm">13

</td>
<td style="border: none; padding: 0cm">52?

</td>
<td style="border: none; padding: 0cm">12

</td>
<td style="border: none; padding: 0cm">30

</td>
<td style="border: none; padding: 0cm">0.76

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me1012.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1012&action=edit&redlink=1 ME1012]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">182

</td>
<td style="border: none; padding: 0cm">200

</td>
<td style="border: none; padding: 0cm">247

</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">65

</td>
<td style="border: none; padding: 0cm">69?

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">24

</td>
<td style="border: none; padding: 0cm">0.62

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me1114.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1114&action=edit&redlink=1 ME1114]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">163

</td>
<td style="border: none; padding: 0cm">201

</td>
<td style="border: none; padding: 0cm">253

</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">65

</td>
<td style="border: none; padding: 0cm">69?

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">24

</td>
<td style="border: none; padding: 0cm">0.62

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me1115motor.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1115&action=edit&redlink=1 ME1115]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">182

</td>
<td style="border: none; padding: 0cm">201

</td>
<td style="border: none; padding: 0cm">253

</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">130

</td>
<td style="border: none; padding: 0cm">52?

</td>
<td style="border: none; padding: 0cm">12

</td>
<td style="border: none; padding: 0cm">30

</td>
<td style="border: none; padding: 0cm">0.76

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1117-pmac-motor-24-48v-6-hp-cont-19-hp-pk.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1117&action=edit&redlink=1 ME1117]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">203
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">9.98

</td>
<td style="border: none; padding: 0cm">13
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.47

</td>
<td style="border: none; padding: 0cm">14.17

</td>
<td style="border: none; padding: 0cm">0.45

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/motenergy-me1118-pmac-motor-24-72v-6-hp-cont-19-hp-pk.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1118&action=edit&redlink=1 ME1118]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">203
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">10.14

</td>
<td style="border: none; padding: 0cm">25
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.47

</td>
<td style="border: none; padding: 0cm">14.17

</td>
<td style="border: none; padding: 0cm">0.44

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1202-brushless-motor-24-72v-5000rpm-10-kw-cont-24-kw-pk.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1202&action=edit&redlink=1 ME1202]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">16.47

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">24

</td>
<td style="border: none; padding: 0cm">0.61

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.thunderstruck-ev.com/motenergy-1302-water-cooled-brushless.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1302&action=edit&redlink=1 ME1302]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">171

</td>
<td style="border: none; padding: 0cm">223

</td>
<td style="border: none; padding: 0cm">252

</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">13

</td>
<td style="border: none; padding: 0cm">52?

</td>
<td style="border: none; padding: 0cm">12?

</td>
<td style="border: none; padding: 0cm">30?

</td>
<td style="border: none; padding: 0cm">0.76

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/me1305-pmac-motor-24-48v-6-hp-cont-15-hp-pk.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1305&action=edit&redlink=1 ME1305]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">203

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">9.98
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.47

</td>
<td style="border: none; padding: 0cm">11.19

</td>
<td style="border: none; padding: 0cm">0.45

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/mepmbrmo.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME1507&action=edit&redlink=1 ME1507]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">153

</td>
<td style="border: none; padding: 0cm">220

</td>
<td style="border: none; padding: 0cm">250

</td>
<td style="border: none; padding: 0cm">19.96
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">17

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">0.85

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0201012801.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME2801&action=edit&redlink=1 ME2801]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">150

</td>
<td style="border: none; padding: 0cm">201

</td>
<td style="border: none; padding: 0cm">212

</td>
<td style="border: none; padding: 0cm">9.98
</td>
<td style="border: none; padding: 0cm">12

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.32

</td>
<td style="border: none; padding: 0cm">14.4

</td>
<td style="border: none; padding: 0cm">0.43

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0201013201.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME3201&action=edit&redlink=1 ME3201]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">111

</td>
<td style="border: none; padding: 0cm">201
</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">13
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">2.4
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0201013501.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME3501&action=edit&redlink=1 ME3501]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">110

</td>
<td style="border: none; padding: 0cm">201
</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.8
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">2.4
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0201013601.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME3601&action=edit&redlink=1 ME3601]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">110

</td>
<td style="border: none; padding: 0cm">201
</td>
<td style="border: none; padding: 0cm">212

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">25
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">5
</td>
<td style="border: none; padding: 0cm">13
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.motenergy.com/me0201014201.html Motenergy]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ME4201&action=edit&redlink=1 ME4201]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">150

</td>
<td style="border: none; padding: 0cm">201

</td>
<td style="border: none; padding: 0cm">212

</td>
<td style="border: none; padding: 0cm">9.98
</td>
<td style="border: none; padding: 0cm">25
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">4.32

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">0.43

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-20-brushless-38hp-liquid-cooled-pmac-motor-24-96v.html EMS]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=DLC-20&action=edit&redlink=1 DLC-20]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">65

</td>
<td style="border: none; padding: 0cm">68?

</td>
<td style="border: none; padding: 0cm">12

</td>
<td style="border: none; padding: 0cm">30
</td>
<td style="border: none; padding: 0cm">0.76

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.electricmotorsport.com/ev-parts/motors/brushless-motors/dlc-28-brushless-57hp-liquid-cooled-pmac-motor-24-120v.html EMS]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=DLC-28&action=edit&redlink=1 DLC-28]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">167
</td>
<td style="border: none; padding: 0cm">223
</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">15.88

</td>
<td style="border: none; padding: 0cm">130

</td>
<td style="border: none; padding: 0cm">54?

</td>
<td style="border: none; padding: 0cm">15

</td>
<td style="border: none; padding: 0cm">38
</td>
<td style="border: none; padding: 0cm">0.94

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enertrac.net/product.php EnerTrac]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/MHM602 MHM602]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub]

</td>
<td style="border: none; padding: 0cm">190
</td>
<td style="border: none; padding: 0cm">254
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">30
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enertrac.net/product.php EnerTrac]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=MHM602_Dual&action=edit&redlink=1">MHM602
Dual</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub]

</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">254
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">20

</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enertrac.net/product.php EnerTrac]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=MHM603&action=edit&redlink=1 MHM603]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub]

</td>
<td style="border: none; padding: 0cm">190
</td>
<td style="border: none; padding: 0cm">254
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">7

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">30
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enertrac.net/product.php EnerTrac]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=MHM603_Dual&action=edit&redlink=1">MHM603
Dual</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub]

</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">254
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">7

</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttps://endless-sphere.com/forums/viewtopic.php?t=46898&f=31">John
in CR</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HubMonster&action=edit&redlink=1 HubMonster]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub]

</td>
<td style="border: none; padding: 0cm">160
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">15.42
</td>
<td style="border: none; padding: 0cm">16

</td>
<td style="border: none; padding: 0cm">18

</td>
<td style="border: none; padding: 0cm">7

</td>
<td style="border: none; padding: 0cm">23
</td>
<td style="border: none; padding: 0cm">0.45

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.zelenavozila.com/#!cromotor/c1ger">Zelena
Vozila</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=Cromotor_V2&action=edit&redlink=1">Cromotor
V2</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">140
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">9.3

</td>
<td style="border: none; padding: 0cm">5

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">0.45

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">MXUS

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=MXUS_3000W_V3&action=edit&redlink=1">3000W
V3</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">142
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">9.34

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">8.9

</td>
<td style="border: none; padding: 0cm">3

</td>
<td style="border: none; padding: 0cm">6
</td>
<td style="border: none; padding: 0cm">0.32

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.crystalyte.com/The%20Crown.htm Crystalyte]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=The_Crown&action=edit&redlink=1">The
Crown</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">140
</td>
<td style="border: none; padding: 0cm">247
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">8.98

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">8.8

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm">5
</td>
<td style="border: none; padding: 0cm">0.22

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttps://wholesaler.alibaba.com/product-detail/QS-500W-205-28H-E-bike_60288067257.html">QS
Motor</a>
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=205/28H&action=edit&redlink=1 205/28H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">140
</td>
<td style="border: none; padding: 0cm">244
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">8.3

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">0.5

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">0.06

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">QS Motor
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=205/50H&action=edit&redlink=1 205/50H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">150
</td>
<td style="border: none; padding: 0cm">247
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">12.75

</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">9
</td>
<td style="border: none; padding: 0cm">3

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">0.24

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttps://wholesaler.alibaba.com/product-detail/QS-4000W-273-40H-E-bike_60278428315.html">QS
Motor</a>
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=273/40H&action=edit&redlink=1 273/40H]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">150
</td>
<td style="border: none; padding: 0cm">317
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">18.1
</td>
<td style="border: none; padding: 0cm">?

</td>
<td style="border: none; padding: 0cm">11
</td>
<td style="border: none; padding: 0cm">4

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">0.22

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.ebikes.ca/shop/ebike-parts/motors/m2705fd.html">Nine
Continent</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=M2705FD&action=edit&redlink=1 M2705FD]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">232

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">6.16

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">12.5

</td>
<td style="border: none; padding: 0cm">0.5

</td>
<td style="border: none; padding: 0cm">1
</td>
<td style="border: none; padding: 0cm">0.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.ebikes.ca/shop/ebike-parts/motors/m3004rc.html">Nine
Continent</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=M3004RC&action=edit&redlink=1 M3004RC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">135

</td>
<td style="border: none; padding: 0cm">230

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">6.28

</td>
<td style="border: none; padding: 0cm">82

</td>
<td style="border: none; padding: 0cm">13.9

</td>
<td style="border: none; padding: 0cm">0.5

</td>
<td style="border: none; padding: 0cm">1
</td>
<td style="border: none; padding: 0cm">0.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://shop.crystalyte-europe.com/product.php?productid=16445 Crystalite]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=H3525&action=edit&redlink=1 H3525]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">135
</td>
<td style="border: none; padding: 0cm">239

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">6.5

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">6.5

</td>
<td style="border: none; padding: 0cm">0.25

</td>
<td style="border: none; padding: 0cm">2

</td>
<td style="border: none; padding: 0cm">0.04

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.crystalyte.com/h35%20series.htm Crystalite]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=H3540&action=edit&redlink=1 H3540]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">105

</td>
<td style="border: none; padding: 0cm">232

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">7.37

</td>
<td style="border: none; padding: 0cm">123

</td>
<td style="border: none; padding: 0cm">10.4

</td>
<td style="border: none; padding: 0cm">0.6

</td>
<td style="border: none; padding: 0cm">1.2
</td>
<td style="border: none; padding: 0cm">0.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.crystalyte.com/h35%20series.htm Crystalite]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=H3548&action=edit&redlink=1 H3548]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">105

</td>
<td style="border: none; padding: 0cm">232

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">7.73

</td>
<td style="border: none; padding: 0cm">84

</td>
<td style="border: none; padding: 0cm">13

</td>
<td style="border: none; padding: 0cm">0.6

</td>
<td style="border: none; padding: 0cm">1.2
</td>
<td style="border: none; padding: 0cm">0.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.ebikes.ca/shop/ebike-parts/motors/mezee250rc.html eZee]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=V2_205RPM&action=edit&redlink=1">v2
205RPM</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">173

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">3.94
</td>
<td style="border: none; padding: 0cm">55

</td>
<td style="border: none; padding: 0cm">8.1

</td>
<td style="border: none; padding: 0cm">0.5

</td>
<td style="border: none; padding: 0cm">1
</td>
<td style="border: none; padding: 0cm">0.13

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.szbaf.com/en/components/component/motor/fm-g01250d.html Bafang]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=FM_G01.250.D&action=edit&redlink=1">FM
G01.250.D</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">173

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2.68

</td>
<td style="border: none; padding: 0cm">96

</td>
<td style="border: none; padding: 0cm">12.7

</td>
<td style="border: none; padding: 0cm">0.25

</td>
<td style="border: none; padding: 0cm">0.5
</td>
<td style="border: none; padding: 0cm">0.09

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.szbaf.com/en/components/component/motor/fm-g32250v.html Bafang]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=FM_G32.250.V&action=edit&redlink=1">FM
G32.250.V</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php/Hub_motor Hub],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Epicyclic_gearing ⚙⚙],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Bicycle_gearing B]

</td>
<td style="border: none; padding: 0cm">100

</td>
<td style="border: none; padding: 0cm">131

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">2.4

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">0.25

</td>
<td style="border: none; padding: 0cm">0.5
</td>
<td style="border: none; padding: 0cm">0.10

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.saiettaengineering.com/motors/ Agni/Saietta]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=95-R&action=edit&redlink=1 95-R]

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">12.8

</td>
<td style="border: none; padding: 0cm">21.7

</td>
<td style="border: none; padding: 0cm">1.16

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.saiettaengineering.com/motors/ Agni/Saietta]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=119&action=edit&redlink=1 119]

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">10.9

</td>
<td style="border: none; padding: 0cm">20.6

</td>
<td style="border: none; padding: 0cm">0.99

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.saiettaengineering.com/motors/ Agni/Saietta]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=119-R&action=edit&redlink=1 119-R]

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">13.2

</td>
<td style="border: none; padding: 0cm">25.2

</td>
<td style="border: none; padding: 0cm">1.20

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-170_D127&action=edit&redlink=1">LEM-170
D127</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">130

</td>
<td style="border: none; padding: 0cm">206?

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">8.5

</td>
<td style="border: none; padding: 0cm">21
</td>
<td style="border: none; padding: 0cm">62

</td>
<td style="border: none; padding: 0cm">7.10

</td>
<td style="border: none; padding: 0cm">21

</td>
<td style="border: none; padding: 0cm">0.84

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-200_95&action=edit&redlink=1">LEM-200
95</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">21.5

</td>
<td style="border: none; padding: 0cm">81

</td>
<td style="border: none; padding: 0cm">10

</td>
<td style="border: none; padding: 0cm">18

</td>
<td style="border: none; padding: 0cm">0.91

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-200_D95B&action=edit&redlink=1">LEM-200
D95B</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">20.5

</td>
<td style="border: none; padding: 0cm">76

</td>
<td style="border: none; padding: 0cm">15

</td>
<td style="border: none; padding: 0cm">28.5

</td>
<td style="border: none; padding: 0cm">1.36

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-200_D127&action=edit&redlink=1">LEM-200
D127</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">17.5
</td>
<td style="border: none; padding: 0cm">50

</td>
<td style="border: none; padding: 0cm">12.56

</td>
<td style="border: none; padding: 0cm">25.38

</td>
<td style="border: none; padding: 0cm">1.14

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-200_D135&action=edit&redlink=1">LEM-200
D135</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">16.75
</td>
<td style="border: none; padding: 0cm">45

</td>
<td style="border: none; padding: 0cm">14.39

</td>
<td style="border: none; padding: 0cm">29.04

</td>
<td style="border: none; padding: 0cm">1.31

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://lynchmotors.co.uk/generators-motors_generators.html Lynch]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=LEM-200_D135RAGS&action=edit&redlink=1">LEM-200
D135RAGS</a>

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">137

</td>
<td style="border: none; padding: 0cm">206

</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">11

</td>
<td style="border: none; padding: 0cm">16.95
</td>
<td style="border: none; padding: 0cm">40

</td>
<td style="border: none; padding: 0cm">18.00

</td>
<td style="border: none; padding: 0cm">36.00

</td>
<td style="border: none; padding: 0cm">1.63

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.yasamotors.com/products/yasa-400/">YASA
Motors</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=YASA-400&action=edit&redlink=1 YASA-400]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Oil_cooling OC]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">92
</td>
<td style="border: none; padding: 0cm">300
</td>
<td style="border: none; padding: 0cm">330
</td>
<td style="border: none; padding: 0cm">24

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm">165
</td>
<td style="border: none; padding: 0cm">2.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.yasamotors.com/products/p400_series/">YASA
Motors</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=YASA-P400S&action=edit&redlink=1 YASA-P400S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Oil_cooling OC]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">107
</td>
<td style="border: none; padding: 0cm">305
</td>
<td style="border: none; padding: 0cm">330?
</td>
<td style="border: none; padding: 0cm">27

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">60
</td>
<td style="border: none; padding: 0cm">160
</td>
<td style="border: none; padding: 0cm">2.22

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttps://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ELMO-S112&action=edit&redlink=1 ELMO-S112]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S?]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">125
</td>
<td style="border: none; padding: 0cm">273
</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">15

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">19
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttps://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ELMO-D144&action=edit&redlink=1 ELMO-D144]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S?]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">145
</td>
<td style="border: none; padding: 0cm">271
</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">45.5
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttps://www.ashwoodselectricmotors.com/axial-flux-motor Ashwoods]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=ELMO-D576&action=edit&redlink=1 ELMO-D576]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S?]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">145
</td>
<td style="border: none; padding: 0cm">271
</td>
<td style="border: none; padding: 0cm">260
</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm"> ?

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-200.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_208LV-AC&action=edit&redlink=1">EMRAX
208LV-AC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">85
</td>
<td style="border: none; padding: 0cm">207
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">9.1
</td>
<td style="border: none; padding: 0cm">0.8
</td>
<td style="border: none; padding: 0cm">58

</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm">80
</td>
<td style="border: none; padding: 0cm">2.20

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-200.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_208LV-LC&action=edit&redlink=1">EMRAX
208LV-LC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">85
</td>
<td style="border: none; padding: 0cm">207
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">9.4
</td>
<td style="border: none; padding: 0cm">0.8
</td>
<td style="border: none; padding: 0cm">58

</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm">80
</td>
<td style="border: none; padding: 0cm">2.13

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-200.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_208LV-CC&action=edit&redlink=1">EMRAX
208LV-CC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">85
</td>
<td style="border: none; padding: 0cm">207
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">9.3
</td>
<td style="border: none; padding: 0cm">0.8
</td>
<td style="border: none; padding: 0cm">58

</td>
<td style="border: none; padding: 0cm">25
</td>
<td style="border: none; padding: 0cm">80
</td>
<td style="border: none; padding: 0cm">2.69

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_228LV-AC&action=edit&redlink=1">EMRAX
228LV-AC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">86
</td>
<td style="border: none; padding: 0cm">228
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">12
</td>
<td style="border: none; padding: 0cm">1.12
</td>
<td style="border: none; padding: 0cm">40

</td>
<td style="border: none; padding: 0cm">28
</td>
<td style="border: none; padding: 0cm">100
</td>
<td style="border: none; padding: 0cm">2.33

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_228LV-LC&action=edit&redlink=1">EMRAX
228LV-LC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">86
</td>
<td style="border: none; padding: 0cm">228
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">12.3
</td>
<td style="border: none; padding: 0cm">1.12
</td>
<td style="border: none; padding: 0cm">40

</td>
<td style="border: none; padding: 0cm">28
</td>
<td style="border: none; padding: 0cm">100
</td>
<td style="border: none; padding: 0cm">2.28

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-228-motorsgen.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_228LV-CC&action=edit&redlink=1">EMRAX
228LV-CC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">86
</td>
<td style="border: none; padding: 0cm">228
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">12.3
</td>
<td style="border: none; padding: 0cm">1.12
</td>
<td style="border: none; padding: 0cm">40

</td>
<td style="border: none; padding: 0cm">35
</td>
<td style="border: none; padding: 0cm">100
</td>
<td style="border: none; padding: 0cm">2.85

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-268.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_268LV-AC&action=edit&redlink=1">EMRAX
268LV-AC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">91
</td>
<td style="border: none; padding: 0cm">268
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">19.9
</td>
<td style="border: none; padding: 0cm">1.7
</td>
<td style="border: none; padding: 0cm">22.2
</td>
<td style="border: none; padding: 0cm">40
</td>
<td style="border: none; padding: 0cm">160
</td>
<td style="border: none; padding: 0cm">2.01

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-268.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_268LV-LC&action=edit&redlink=1">EMRAX
268LV-LC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner],

</td>
<td style="border: none; padding: 0cm">91
</td>
<td style="border: none; padding: 0cm">268
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">20.3
</td>
<td style="border: none; padding: 0cm">1.7
</td>
<td style="border: none; padding: 0cm">22.2
</td>
<td style="border: none; padding: 0cm">40
</td>
<td style="border: none; padding: 0cm">160
</td>
<td style="border: none; padding: 0cm">1.97

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-268.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_268LV-CC&action=edit&redlink=1">EMRAX
268LV-CC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">91
</td>
<td style="border: none; padding: 0cm">268
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">20.3
</td>
<td style="border: none; padding: 0cm">1.7
</td>
<td style="border: none; padding: 0cm">22.2
</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm">160
</td>
<td style="border: none; padding: 0cm">2.46

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.enstroj.si/Electric-products/emrax-268.html Enstroj]

</td>
<td style="border: none; padding: 0cm"><a href="https://endless-sphere.com/w/index.php%3Ftitle=EMRAX_268MV-CC&action=edit&redlink=1">EMRAX
268MV-CC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]

</td>
<td style="border: none; padding: 0cm">91
</td>
<td style="border: none; padding: 0cm">268
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">20.3
</td>
<td style="border: none; padding: 0cm">11.5
</td>
<td style="border: none; padding: 0cm">8.2
</td>
<td style="border: none; padding: 0cm">50
</td>
<td style="border: none; padding: 0cm">200
</td>
<td style="border: none; padding: 0cm">2.46

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://store.evtv.me/proddetail.php?prod=brammo Parker]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=GVM145-2&action=edit&redlink=1 GVM145-2]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">254
</td>
<td style="border: none; padding: 0cm">178
</td>
<td style="border: none; padding: 0cm">-
</td>
<td style="border: none; padding: 0cm">16
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">25
</td>
<td style="border: none; padding: 0cm">41
</td>
<td style="border: none; padding: 0cm">1.56

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=Phi271&action=edit&redlink=1 Phi271]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">95
</td>
<td style="border: none; padding: 0cm">308
</td>
<td style="border: none; padding: 0cm">317
</td>
<td style="border: none; padding: 0cm">20
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">90
</td>
<td style="border: none; padding: 0cm">155
</td>
<td style="border: none; padding: 0cm">4.5

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=Phi27S&action=edit&redlink=1 Phi27S]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">77
</td>
<td style="border: none; padding: 0cm">308
</td>
<td style="border: none; padding: 0cm">317
</td>
<td style="border: none; padding: 0cm">12
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">45
</td>
<td style="border: none; padding: 0cm">75
</td>
<td style="border: none; padding: 0cm">3.75

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=Ph381&action=edit&redlink=1 Ph381]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">115

</td>
<td style="border: none; padding: 0cm">398
</td>
<td style="border: none; padding: 0cm">429

</td>
<td style="border: none; padding: 0cm">38
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">90

</td>
<td style="border: none; padding: 0cm">200
</td>
<td style="border: none; padding: 0cm">2.37

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.phi-power.com/en/phi-power-motor-series/ Phi-Power]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=Ph382&action=edit&redlink=1 Ph382]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]

</td>
<td style="border: none; padding: 0cm">224

</td>
<td style="border: none; padding: 0cm">398
</td>
<td style="border: none; padding: 0cm">429

</td>
<td style="border: none; padding: 0cm">78
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">180

</td>
<td style="border: none; padding: 0cm">400
</td>
<td style="border: none; padding: 0cm">2.31

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.brusa.biz/en/products/drive/motor-400-v/hsm1-61712.html BRUSA]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HSM1-6.17.12&action=edit&redlink=1 HSM1-6.17.12]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">256
</td>
<td style="border: none; padding: 0cm">292
</td>
<td style="border: none; padding: 0cm">328

</td>
<td style="border: none; padding: 0cm">51.5
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">70
</td>
<td style="border: none; padding: 0cm">120
</td>
<td style="border: none; padding: 0cm">1.36

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101804.html BRUSA]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HSM1-10.18.04&action=edit&redlink=1 HSM1-10.18.04]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">174
</td>
<td style="border: none; padding: 0cm">292
</td>
<td style="border: none; padding: 0cm">328

</td>
<td style="border: none; padding: 0cm">26
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">28
</td>
<td style="border: none; padding: 0cm">51
</td>
<td style="border: none; padding: 0cm">1.08

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101813.html BRUSA]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HSM1-10.18.13&action=edit&redlink=1 HSM1-10.18.13]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">256
</td>
<td style="border: none; padding: 0cm">292
</td>
<td style="border: none; padding: 0cm">328

</td>
<td style="border: none; padding: 0cm">51
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">93
</td>
<td style="border: none; padding: 0cm">156
</td>
<td style="border: none; padding: 0cm">1.82

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.brusa.biz/en/products/drive/motor-400-v/hsm1-101822.html BRUSA]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HSM1-10.18.22&action=edit&redlink=1 HSM1-10.18.22]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">344
</td>
<td style="border: none; padding: 0cm">292
</td>
<td style="border: none; padding: 0cm">328

</td>
<td style="border: none; padding: 0cm">76
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">145
</td>
<td style="border: none; padding: 0cm">220
</td>
<td style="border: none; padding: 0cm">1.91

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://www.brusa.biz/en/products/drive/motor-400-v/hsm1-121813.html BRUSA]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=HSM1-12.18.13&action=edit&redlink=1 HSM1-12.18.13]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S],
[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">280
</td>
<td style="border: none; padding: 0cm">359
</td>
<td style="border: none; padding: 0cm">383

</td>
<td style="border: none; padding: 0cm">52
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">90
</td>
<td style="border: none; padding: 0cm">125
</td>
<td style="border: none; padding: 0cm">1.73

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://www.cn-dcmotor.com/en/ProductShow.asp?id=136">Shenzen
Unite</a>

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=1020G&action=edit&redlink=1 1020G]

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">151
</td>
<td style="border: none; padding: 0cm">108
</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">5.1
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">1
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm">0.20

</td>
</tr>
<tr>
<td style="border: none; padding: 0cm">[https://web.archive.orghttps://kostov-motors.com/ev-motors/mtr-00333/ Kostov]

</td>
<td style="border: none; padding: 0cm">[https://endless-sphere.com/w/index.php%3Ftitle=K10&action=edit&redlink=1 K10]

</td>
<td style="border: none; padding: 0cm"><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a>

</td>
<td style="border: none; padding: 0cm">[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner]

</td>
<td style="border: none; padding: 0cm">376
</td>
<td style="border: none; padding: 0cm">268
</td>
<td style="border: none; padding: 0cm">-

</td>
<td style="border: none; padding: 0cm">69
</td>
<td style="border: none; padding: 0cm"> ?
</td>
<td style="border: none; padding: 0cm"> ?

</td>
<td style="border: none; padding: 0cm">31.6
</td>
<td style="border: none; padding: 0cm">60
</td>
<td style="border: none; padding: 0cm">0.46

</td>
</tr>
</table>
<ul>
<li>¹ without
shaft, minimum required dropout width on (bicycle) hubs

<li>² if
cylindrical

<li>³
<a href="https://web.archive.orghttp://www.engineeringtoolbox.com/iec-duty-cucles-d_739.html">actual
S1 or S2 (60 min) rating</a>, in
italic text if estimate not
supplied by manufacturer, details in specsheet 

<li>* based on continuous rating
</ul>
<hr/>

Technology

<ul>
<li><a href="https://web.archive.orghttp://en.wikipedia.org/wiki/Brushed_DC_electric_motor">Brushed
DC</a> 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Brushless_DC_electric_motor BLDC]
- any waveform 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Water_cooling WC]
= water cooling 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Oil_cooling OC]
= oil cooling 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Hall_effect_sensor H]
= built in Hall sensors 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Resolver_(electrical) S]
= built in sin/cos encoder
</ul>
Layout

<ul>
<li>[https://endless-sphere.com/w/index.php/Hub_motor Hub],
optionally geared (⚙⚙) and/or B for bicycle (if
designed to have a sprocket mounted) 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Inrunner Inrunner],
optionally [https://web.archive.orghttp://en.wikipedia.org/wiki/Electric_motor#Pancake_or_axial_rotor_motor AG]
for Axial Gap ("Pancake Style", AKA as Axial Flux) 

<li>[https://web.archive.orghttp://en.wikipedia.org/wiki/Outrunner Outrunner]
</ul>
<hr/>

Note: this page
is discussed on <a href="https://web.archive.orghttp://endless-sphere.com/forums/viewtopic.php?f=30&t=69970">Motor
selection: sortable table in the Wiki</a> 

<ul>
<li>Use <a href="https://endless-sphere.com/w/index.php/Motor_Specsheet_Template">Motor
Specsheet Template</a> to copy and paste from when you create a
detailed Specsheet from a red link


</ul>

<script>
(window.RLQ=window.RLQ||[]).push(function(){mw.config.set({"wgPageParseReport":{"limitreport":{"cputime":"0.036","walltime":"0.048","ppvisitednodes":{"value":2,"limit":1000000},"ppgeneratednodes":{"value":8,"limit":1000000},"postexpandincludesize":{"value":0,"limit":2097152},"templateargumentsize":{"value":0,"limit":2097152},"expansiondepth":{"value":2,"limit":40},"expensivefunctioncount":{"value":0,"limit":100},"timingprofile":["100.00% 0.000 1 -total"]},"cachereport":{"timestamp":"20180203193516","ttl":86400,"transientcontent":false}}});});

</script><script>
(window.RLQ=window.RLQ||[]).push(function(){mw.config.set({"wgBackendResponseTime":153});});

</script>
</body>
</html>

Main Page Old

2020-05-26T23:37:48Z

Mdrobnak: Links to EV Conversion Parts sections

Welcome to the openinverter.org Wiki Site.
Everyone registered at the [https://openinverter.org/forum/index.php forum] can login here with the same username and password and can make changes.

= Getting Started =

=== The open inverter project consists of three main aspects: ===
{| class="wikitable"
|+
!Hardware
!Firmware
!Web Interface
|-
|The design and development of the [[Main Board Version 3|control hardware]] based around an STM32F103 chip. This provides the control signals to the power stage and on to the attached components.
|The development of the code that goes on the STM32F103 chips and determines, amongst other things what signals are sent to the power stage and the attached components.
|Using an ESP8266 chip, the development of a simple web based interface to adjust the parameters on the firmware chip and to display values returned from the chip, for example motor speed (RPM).
|}

=== There are two variants available: ===
{| class="wikitable"
|+
!Kit for use with your own power section.
!Kit for use with [[OEM_Repurposing|existing power sections]],
|-
|This is the kit provided to build your own power section, meaning sourcing and constructing your own IGBTs and other components.

You can find the build instructions for this kit [[Schematics and Instructions|here]]
|This is the kit for use with existing power sections, meaning inverters sourced from OEM parts taken from existing cars, etc. and utilising the components within them.

For example [https://github.com/damienmaguire/ drop in boards for Tesla drive units], Prius Inverters, and so on.
|}

Once you have the inverter parts, you will need additional components for your EV conversion:
* [[EV Conversion Parts#Motors|Motor]]
* [[EV Conversion Parts#Batteries|Batteries]]
* [[EV Conversion Parts#Charger|Charger]]
* DC/DC Converter
* HV Junction Box
* Other various components
** Pumps, Heaters, etc.

More detailed information on these items can be found on the [[EV Conversion Parts]] page.

If you want to tune your inverter check the [[Parameters|parameter description]].

You might also want to set up [[CAN communication|CAN communication]] or use the inverter as a [[Battery Charging|battery charger]] also.

= FAQs =
* [[Common Inverter FAQ]] - questions common to all hardware variants
* [[Tesla Inverter FAQ]] - questions regarding Tesla Large Drive Units and Small Drive Units

= Open Inverter Hardware =
* [[Schematics and Instructions]] - for the "vanilla" inverter kit.
* [[Main Board Version 3]]
* [[Main Board Version 2]]
* [[Main Board Version 1]]
* [[Sense Boards]]
* [[Gate Driver]]
* [[4-cell BMS]]
* [[Hardware Theory of Operation]]
* [[Sensor Board|Legacy Sensor Board]]

= Open Inverter Software =
* [[Using FOC Software]]
* [[Downloads]]
* [[Features]]
* [[Web Interface]]
* [[Battery Charging]]
* [[Errors]]
* [[CAN communication]]
* [[Parameters]]
* [[Configuration Files]]
* [[Software Theory of Operation]]

= Open Inverter CAN std. =
* [[Introduction CAN STD|Introduction]]
* [[CAN table CAN STD|CAN table]]

= Glossary of Terms =
* [[Glossary of Terms]]

= Conversion Projects =
* [[Legalities]]
* [[VW Polo 86C Conversion]]
* [[Touran Conversion]]

= OEM Parts =
* [[BMW]]
* [[Isabellenhütte Heusler]]
* [[Nissan]]
* [[Tesla]]
* [[Toyota]]
* [[Chevrolet]]

Panasonic AEV14012 Contactor

2020-05-26T18:46:34Z

Mdrobnak: Created page with "frameless As per Arber333: <blockquote> Also from Volt pack you can salvage 2 powerfull contactors. P/N AEV14012 it is rated for 120A cont..."

[[File:Panasonic AEV14012.jpg|frameless]]
 
As per Arber333:
<blockquote>
Also from Volt pack you can salvage 2 powerfull contactors. P/N AEV14012 it is rated for 120A continuously and 400A for a short burst. This means they had to use one of theese on + line and another on - side. Together you get 240A rating for system with 800A for a burst of power.
Contactor pulls 0.5A when active.
</blockquote>

Mouser lists as obsolete with no replacement: 
https://www.mouser.com/ProductDetail/Panasonic-Industrial-Devices/AEV31012?qs=%2Fha2pyFaduhQtRGmPu6CHKnpAO9pZACcsMnCfvY8GwI%3D

EV Conversion Parts

2020-05-26T18:37:16Z

Mdrobnak:

== Motors ==

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

 There is a more general [[Motor List]] as well.

== Batteries ==
CALB 
LG Chem - BMW Hybrid 
LG Chem - BMW I3 
LG Chem - Chevy Volt 
LG Chem - Chrysler Pacifica Hybrid 
Tesla 

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]] 
Chevy Volt / Lear 
[[Tesla Model S/X Charger|Tesla Gen 2 10kW(?)]] 
[[Tesla Model 3 Charger/DCDC ("PCS")|Tesla PCS]]

== Contactors ==
[[EV Conversion Parts - Contactors - Panasonic AEV14012]]

== DC/DC ==
Chevy Volt / Lear 
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
[[EV Conversion Parts - Power Steering Pump - Opel_Astra]]

File:Panasonic AEV14012.jpg

2020-05-26T18:35:27Z

Mdrobnak: Panasonic AEV14012 Contactor from Chevy Volt / Ampera battery pack. Image courtesy of Arber333.

== Summary ==
Panasonic AEV14012 Contactor from Chevy Volt / Ampera battery pack. Image courtesy of Arber333.

Opel Power Steering Pump

2020-05-26T17:56:38Z

Mdrobnak: Created page with "Pump: border Harness: border Us..."

Pump: 
[[File:Opel Astra Power Steering Pump.jpg|frameless|border]]
 
 
Harness: 
[[File:Opel Astra Power Steering Pump Harness.jpg|frameless|border]]
 
 
Usage:

From Arber333:
<blockquote>
So here is how the pump works.
- Connect thick red wire on live 12V via 80A fuse.
- Connect thick brown wire to car chassis as negaitve lead.
- Driver provides ignition 12V and pump should get this signal via thin Black wire.
- starts engine and pump gets the signal from live alternator voltage via thin blue/white wire.

In former case pump will spool up at once and provide steady pressure. It will draw some 6A of current with no delta pressure at the steering end.
You can connect both thin wires to 12V at the same time too however. In that case pump will start, but will spool up really slowly.

Normally i use one 12V relay in a car to signal 12V ignition live to other support elements inside car. I connect there coolant water pump, DCDC enable signal, power to inverter , precharge relay, vacuum pump and of course EHPAS pump black wire.
When i turn to start the car i have one latching (or two) relay to provide "engine on" signal for car computer. I connect blue/white wire here nd as soon as i start inverter power steering is on!
</blockquote>

File:Opel Astra Power Steering Pump Harness.jpg

2020-05-26T17:55:05Z

Mdrobnak: Courtesy of Arber333

== Summary ==
Courtesy of Arber333

File:Opel Astra Power Steering Pump.jpg

2020-05-26T17:41:46Z

Mdrobnak: Courtesy of Arber333.

== Summary ==
Courtesy of Arber333.

File:Ade910b746c28a30f6e6e2c9086c.jpg

2020-05-26T17:40:13Z

Mdrobnak:

EV Conversion Parts

2020-05-26T17:35:56Z

Mdrobnak: /* Power Steering */

== Motors ==

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

 There is a more general [[Motor List]] as well.

== Batteries ==
CALB 
LG Chem - BMW Hybrid 
LG Chem - BMW I3 
LG Chem - Chevy Volt 
LG Chem - Chrysler Pacifica Hybrid 
Tesla 

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]] 
Chevy Volt / Lear 
[[Tesla Model S/X Charger|Tesla Gen 2 10kW(?)]] 
[[Tesla Model 3 Charger/DCDC ("PCS")|Tesla PCS]]

== DC/DC ==
Chevy Volt / Lear 
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
[[EV Conversion Parts - Power Steering Pump - Opel_Astra]]

EV Conversion Parts

2020-05-21T15:29:40Z

Mdrobnak: Move the motor list out of the PMSM heading.

== Motors ==

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

 There is a more general [[Motor List]] as well.

== Batteries ==
CALB 
LG Chem - BMW Hybrid 
LG Chem - BMW I3 
LG Chem - Chevy Volt 
LG Chem - Chrysler Pacifica Hybrid 
Tesla 

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]] 
Chevy Volt / Lear 
[[Tesla Model S/X Charger|Tesla Gen 2 10kW(?)]] 
[[Tesla Model 3 Charger/DCDC ("PCS")|Tesla PCS]]

== DC/DC ==
Chevy Volt / Lear 
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

Main Page Old

2020-05-21T14:45:40Z

Mdrobnak: Organize main page more logically from the "New_Main_Page" layout.

Welcome to the openinverter.org Wiki Site.
Everyone registered at the forum can login here with the same username and password and can make changes.

= Getting Started =
The open inverter project consists of three main aspects:
* Reference designs for the [[Main Board Version 3|control hardware]] using an STM32F103
* The inverter firmware, which can control AC Induction motors or Permanent Magnet Synchronous Motors
* An easy to use web interface.

There are two variants available:
* Kit for use with your own power section. If you have received a kit you are probably looking for [[Schematics and Instructions|build instructions]].
* Kit for use with [[OEM_Repurposing|existing power sections]], including [https://github.com/damienmaguire/ drop in boards for Tesla] small and large drive units.

If you want to tune your inverter check the [[Parameters|parameter description]].

Once you have the inverter parts, you will need additional components for your EV conversion:
* Motor
* Batteries
* Charger
* DC/DC Converter
* HV Junction Box
* Other various components

More detailed information on these items can be found on the [[EV Conversion Parts]] page.

You might also want to set up [[CAN communication|CAN communication]] or use the inverter as a [[Battery Charging|battery charger]] also.

= FAQs =
* [[Common Inverter FAQ]] - questions common to all hardware variants
* [[Tesla Inverter FAQ]] - questions regarding Tesla Large Drive Units and Small Drive Units

= Open Inverter Hardware =
* [[Schematics and Instructions]] - for the "vanilla" inverter kit.
* [[Main Board Version 3]]
* [[Main Board Version 2]]
* [[Main Board Version 1]]
* [[Sense Boards]]
* [[Gate Driver]]
* [[4-cell BMS]]
* [[Hardware Theory of Operation]]
* [[Sensor Board|Legacy Sensor Board]]

= Open Inverter Software =
* [[Using FOC Software]]
* [[Downloads]]
* [[Features]]
* [[Web Interface]]
* [[Battery Charging]]
* [[Errors]]
* [[CAN communication]]
* [[Parameters]]
* [[Configuration Files]]
* [[Software Theory of Operation]]

= Open Inverter CAN std. =
* [[Introduction CAN STD|Introduction]]
* [[CAN table CAN STD|CAN table]]

= Glossary of Terms =
* [[Glossary of Terms]]

= Conversion Projects =
* [[Legalities]]
* [[VW Polo 86C Conversion]]
* [[Touran Conversion]]

= OEM Parts =
* [[Isabellenhütte Heusler]]
* [[Nissan]]
* [[Tesla]]

Parameters

2020-05-15T17:31:58Z

Mdrobnak: Fix the inline graphic removing all the redundant tags. Add units.

The inverter can be adapted to many kinds of motors, battery packs and driver preferences by changing parameters.

== Motor Parameters ==
The parameters to adjust the inverter to the motor are boost, fweak, fslipmin, fslipmax, polepairs, fmin, fmax and numimp.

They can be deduced from the motors nameplate or by trying which feels best. For illustration we will assume a bus voltage of 500V and a 4-pole (p=2) motor with a nominal speed of n=1450rpm@f=50Hz and 230V. With 500V DC an AC voltage of 500/1.41=355V can be generated.

'''boost''' is the digital amplitude of the sine wave at motor startup. It is needed to overcome the motors ohmic resistance. Digital amplitude is an internal quantity. 0 means no voltage is generated at all, 37813 means the full possible voltage is generated.

Example: boost=1700

At full throttle an effective voltage of 1700/37813*355=16V is generated. The best way to find a feasible value is to optimize it in the finished car. Start with the default value and increase until you get a good startup.

'''fweak''' is the frequency at which the full possible voltage is generated. It is also the point of the highest motor power. Beyond fweak torque will decrease to the square of frequency and thus power will decrease linear with frequency.

A starting point for fweak is the motors nameplate:

[[File:Fweak.png|210x210px]]

With our illustration motor fweak=(355 V/230 V) * 50 Hz = 77 Hz. fweak can be configured lower than that resulting in more torque at the low end.

'''fslipmin'''/'''fslipmax''' is the slip frequency at which the motor is run at minimum/maximum throttle. fslipmin is set to the motors optimal slip frequency which can be deduced from the nameplate. fslipmin=f-p*n/60. With our illustration motor fslipmin=50-2*1450/60=1.66Hz. fslipmax can be set as high as breakdown torque which is not found on the nameplate. So its best found experimental starting with 2*fslipmin. If set too high the motor will start to rock violently on startup, possibly tripping the over current limit.

'''polepairs''' is set to p, 2 in our example.

'''fmin''' should be set just below fslipmin.

'''fmax''' is used to limit the speed of the motor. The default 200Hz would result in a maximum speed of about 6000rpm.

'''ampmin''' Is the minimum relative amplitude fed to the motor. At very low amplitudes the motor does not generate any noticable torque and throttle travel is wasted that does nothing. Find out a good value by experimenting.

== Inverter Parameters ==
'''pwmfrq''' Sets the frequency at which the IGBTs are switched on and off. The faster the switching the higher the losses in the inverter and the lower the losses in the motor. The maximum frequency is also limited by the driver boards as explained here.

'''pwmpol''' Sets the polarity of the PWM signals, active high or active low. Do not touch this parameter if you don't know what you're doing. When configured inversely it will blow up your power stage immediatly if connected to a potent power source like batteries.

'''deadtime''' The time between switching off one IGBT and switching on the other. 28=800ns, 63=1.5µs. More values can be found in the STM32 data sheet. Make sure to test the deadtime at low power levels. Setting the deadtime too low while operating of a potent power source can blow up your power stage!

== Parameter Reference ==
The following parameters currently exist to customize the controller software. Type
set param <value>
to change it. Type
get param
to get the current value.

Parameters are internally stored with 5 binary fraction digits. That means there are 32 possible values after the decimal point. So when you set a value of 0.35 you might end up with 0.33.

{| class="wikitable"
|'''Name'''
|'''Unit'''
|'''Min'''
|'''Max'''
|'''Default'''
|'''Description'''
|-
| colspan="6" |'''Motor (FOC)'''
|-
|curkp
|
|0
|20000
|64
|Current controller proportional gain
|-
|curki
|
|0
|100000
|20000
|Current controller integral gain
|-
|curkifrqgain
|dig/Hz
|0
|1000
|50
|Current controllers integral gain frequency coefficient
|-
|fwkp
|
| -10000
|0
| -100
|Cross comparison field weakening controller gain
|-
|dmargin
|dig/Hz
| -10000
|0
| -2000
|Margin for residual torque producing current (so field weakening current doesn't use up the entire amplitude)
|-
|syncadv
|dig/Hz
| -100
|100
|10
|Shifts "syncofs" downwards/upwards with frequency
|-
| colspan="6" |'''Motor (sine)'''
|-
|boost
|dig
|0
|37813
|1700
|0 Hz Boost in digit. 1000 digit ~ 2.5%
|-
|fweak
|Hz
|0
|400
|67
|Frequency where V/Hz reaches its peak
|-
|fconst
|Hz
|0
|400
|400
|Frequency where slip frequency is derated to form a constant power region. Only has an effect when < fweak
|-
|udcnom
|V
|0
|1000
|0
|Nominal voltage for fweak and boost. fweak and boost are scaled to the actual dc voltage. 0=don't scale
|-
|fslipmin
|Hz
|0
|100
|1
|Slip frequency at minimum throttle
|-
|fslipmax
|Hz
|0
|100
|3
|Slip frequency at maximum throttle
|-
|fslipconstmax
|Hz
|0
|10
|5
|Slip frequency at maximum throttle and fconst
|-
|fmin
|Hz
|0
|400
|1
|Below this frequency no voltage is generated
|-
| colspan="6" |'''Motor (common)'''
|-
|polepairs
|
|1
|16
|2
|Pole pairs of motor (e.g. 4-pole motor: 2 pole pairs)
|-
|respolepairs
|
|1
|16
|1
|Pole pairs of resolver (normally same as polepairs of motor, but sometimes 1)
|-
|encflt
|
|0
|16
|4
|Filter constant between pulse encoder and speed calculation. Makes up for slightly uneven pulse distribution
|-
|encmode
|
|0
|4
|0
|0=single channel encoder, 1=quadrature encoder,
2=quadrature /w index pulse,
3=SPI (deprecated),
4=Resolver,
5=sin/cos chip
|-
|fmax
|Hz
|0
|400
|200
|At this frequency rev limiting kicks in
|-
|numimp
|Imp/rev
|8
|8192
|60
|Pulse encoder pulses per turn
|-
|dirchrpm
|rpm
|0
|2000
|100
|Motor speed at which direction change is allowed
|-
|dirmode
|
|0
|1
|1
|0=button (momentary pulse selects forward/reverse), 1=switch (forward or reverse signal must be constantly high)
|-
|syncofs
|dig
|0
|65535
|0
|Phase shift of sine wave after receiving index pulse
|-
|snsm
|
|2
|3
|2
|Motor temperature sensor. 12=KTY83, 13=KTY84, 14=Leaf, 15=KTY81
|-
| colspan="6" |'''Inverter'''
|-
|pwmfrq
|
|0
|3
|2
|PWM frequency. 0=17.6kHz, 1=8.8kHz, 2=4.4kHz, 3=2.2kHz. Needs PWM restart
|-
|pwmpol
|
|0
|1
|0
|PWM polarity. 0=active high, 1=active low. DO NOT PLAY WITH THIS!
Needs PWM restart
|-
|deadtime
|dig
|0
|255
|28
|Deadtime between highside and lowside pulse. 28=800ns, 56=1.5µs. Not always linear, consult STM32 manual. Needs PWM restart
|-
|ocurlim
|A
| -65535
|65535
|100
|Hardware over current limit. RMS-current times sqrt(2) + some slack. Set negative if il1gain and il2gain are negative.
|-
|minpulse
|dig
|0
|4095
|1000
|Narrowest or widest pulse, all other mapped to full off or full on, respectively
|-
|il1gain
|dig/A
|0
|4095
|4.7
|Digits per A of current sensor L1
|-
|il2gain
|dig/A
|0
|4095
|4.7
|Digits per A of current sensor L2
|-
|udcgain
|dig/V
|0
|4095
|6.15
|Digits per V of DC link
|-
|udcofs
|dig
|0
|4095
|0
|DC link 0V offset
|-
|udclim
|V
|0
|1000
|540
|High voltage at which the PWM is shut down
|-
|snshs
|
|0
|1
|0
|Heatsink temperature sensor. 0=JCurve, 1=Semikron, 2=MBB600, 3=KTY81, 4=PT1000, 5=NTCK45+2k2, 6=Leaf
|-
|pinswap
|
|0
|7
|0
|Swap pins (only "FOC" software). Multiple bits can be set. 1=Swap Current Inputs, 2=Swap Resolver sin/cos, 4=Swap PWM output 1/3
|-
| colspan="6" |'''Derating'''
|-
|bmslimhigh
|%
|0
|100
|50
|Positive throttle limit on BMS under voltage
|-
|bmslimlow
|%
| -100
|0
| -1
|Regen limit on BMS over voltage
|-
|udcmin
|V
|0
|1000
|450
|Minimum battery voltage
|-
|udcmax
|V
|0
|1000
|520
|Maximum battery voltage
|-
|iacmax
|A
|0
|5000
|5000
|Maximum peak AC current
|-
|idcmax
|A
|0
|5000
|5000
|Maximum DC input current
|-
|idcmin
|A
| -5000
|0
| -5000
|Maximum DC output current (regen)
|-
|throtmax
|%
|0
|100
|100
|Throttle limit
|-
|throtmin
|%
| -100
|0
| -100
|Throttle regen limit
|-
|ifltrise
|dig
|0
|32
|10
|Controls how quickly slip and amplitude recover. The greater the value, the slower
|-
|ifltfall
|dig
|0
|32
|3
|Controls how quickly slip and amplitude are reduced on over current. The greater the value, the slower
|-
| colspan="6" |'''Charger'''
|-
|chargemode
|
|0
|4
|0
|0=Off, 3=Boost, 4=Buck
|-
|chargecur
|
|0
|50
|0
|Charge current setpoint. Boost mode: charger INPUT current. Buck mode: charger output current
|-
|chargekp
|
|0
|100
|80
|Charge controller gain. Lower if you have oscillation, raise if current set point is not met
|-
|chargeflt
|
|0
|10
|8
|Charge current filtering. Raise if you have oscillations
|-
|chargemax
|%
|0
|99
|90
|Charge mode duty cycle limit. Especially in boost mode this makes sure you don't overvolt you IGBTs if there is no battery connected.
|-
| colspan="6" |'''Throttle'''
|-
|potmin
|dig
|0
|4095
|0
|Value of "pot" when pot isn't pressed at all
|-
|potmax
|dig
|0
|4095
|4095
|Value of "pot" when pot is pushed all the way in
|-
|pot2min
|dig
|0
|4095
|4095
|Value of "pot2" when regen pot is in 0 position
|-
|pot2max
|dig
|0
|4095
|4095
|Value of "pot2" when regen pot is in full on position
|-
|potmode
|
|0
|2
|0
|0=Pot 1 is throttle and pot 2 is regen strength preset,
1=Pot 2 is proportional to pot 1 (redundance)
2=Throttle controlled via CAN
|-
|throtramp
|%/10ms
|0
|100
|100
|Max positive throttle slew rate
|-
|throtramprpm
|rpm
|0
|20000
|20000
|No throttle ramping above this speed
|-
|ampmin
|%
|0
|100
|10
|Minimum relative sine amplitude (only "sine" software)
|-
|slipstart
|%
|10
|100
|50
|% positive throttle travel at which slip is increased (only "sine" software)
|-
|throtcur
|A/%
| -10
|10
|1
|Motor current per % of throttle travel (only "FOC" software)
|-
| colspan="6" |'''Regen'''
|-
|brknompedal
|%
| -100
|0
| -50
|Foot on break pedal regen torque
|-
|brkpedalramp
|%/10ms
|1
|100
|100
|Ramp speed when entering regen. E.g. when you set brkmax to 20% and brkpedal to -60% and brkpedalramp to 1, it will take 400ms to arrive at brake force of -60%
|-
|brknom
|%
|0
|100
|30
|Regen padel travel
|-
|brkmax
|%
|0
|100
|30
|Foot-off regen torque
|-
|brkrampstr
|Hz
|0
|400
|10
|Below this frequency the regen torque is reduced linearly with the frequency
|-
|brkout
|%
| -100
| -1
| -50
|Activate brake light output at this amount of braking force
|-
| colspan="6" |'''Automation'''
|-
|idlespeed
|rpm
| -100
|1000
| -100
|Motor idle speed. Set to -100 to disable idle function. When idle speed controller is enabled, brake pedal must be pressed on start.
|-
|idlethrotlim
|%
|0
|100
|50
|Throttle limit of idle speed controller
|-
|idlemode
|
|0
|1
|0
|Motor idle speed mode. 0=always run idle speed controller, 1=only run it when brake pedal is released, 2=like 1 but only when cruise switch is on
|-
|speedkp
|Hz
|0
|100
|1
|Speed controller gain (Cruise and idle speed). Decrease if speed oscillates. Increase for faster load regulation
|-
|speedflt
|dig
|0
|16
|1
|Filter before cruise controller
|-
|cruisemode
|
|0
|1
|0
|0=button (set when button pressed, reset with brake pedal), 1=switch (set when switched on, reset when switched off or brake pedal)
|-
| colspan="6" |'''Contactor Control'''
|-
|udcsw
|V
|0
|1000
|330
|Voltage at which the DC contactor is allowed to close
|-
|udcswbuck
|V
|0
|1000
|540
|Voltage at which the DC contactor is allowed to close in buck charge mode
|-
|tripmode
|
|0
|2
|0
|What to do with relays at a shutdown event. 0=All off, 1=Keep DC switch closed, 2=close precharge relay
|-
| colspan="6" |'''Auxillary PWM'''
|-
|pwmfunc
|
|0
|2
|0
|Quantity that controls the PWM output. 0=tmpm, 1=tmphs, 2=speed
|-
|pwmgain
|dig/C
|0
|65535
|100
|Gain of PWM output
|-
|pwmofs
|dig
| -65535
|65535
|0
|Offset of PWM output, 4096=full on
|-
| colspan="6" |'''Communication'''
|-
|canspeed
|
|0
|3
|0
|Baud rate of CAN interface 0=250k, 1=500k, 2=800k, 3=1M
|-
|canperiod
|
|0
|1
|0
|0=send configured CAN messages every 100ms, 1=every 10ms
|-
| colspan="6" |'''Testing'''
|-
|fslipspnt
|Hz
| -100
|100
|0
|Slip setpoint in mode 2. Written by software in mode 1
|-
|ampnom
|%
|0
|100
|0
|Nominal amplitude in mode 2. Written by software in mode 1
|}

== Spot values ==
The following values are available for diagnostic purposes. Type
get
to get the current value. To read more then one you can provide a list like
get il1,il2,udc
{| class="wikitable"
|'''Name'''
|'''Unit'''
|'''Description'''
|-
|version
|
|Firmware version
|-
|hwver
|
|Hardware version
|-
|opmode
|
|Operating mode. 0=Off, 1=Run, 2=Manual_run, 3=Boost, 4=Buck, 5=Sine, 6=2 Phase sine
|-
|lasterr
|
|Last error message
|-
|udc
|V
|DC link voltage
|-
|uac
|V
|Calculated AC voltage
|-
|idc
|A
|Calculated DC current
|-
|il1
|A
|AC current L1
|-
|il2
|A
|AC current L2
|-
|il1rms
|A
|RMS current L1
|-
|il2rms
|A
|RMS current L2
|-
|ilmax
|A
|Calculated max of il1, il2, il3
|-
|boostcalc
|A
|DC link adjusted boost setting
|-
|fweakcalc
|A
|DC link adjusted fweak setting
|-
|fstat
|Hz
|Stator frequency
|-
|speed
|rpm
|Motor speed
|-
|cruisespeed
|rpm
|Motor RPM set point for cruise control if cruisemode=CAN
|-
|turns
|
|Number of turns the motor completed since power up
|-
|amp
|dig
|Sine amplitude, 37813=max
|-
|angle
|°
|Motor rotor angle, 0-360°
|-
|pot
|dig
|Pot value, 4095=max
|-
|pot2
|dig
|Regen Pot value, 4095=max
|-
|potnom
|%
|Scaled pot value, 0 accel
|-
|dir
|
|Rotation direction. -1=REV, 0=Neutral, 1=FWD
|-
|tmphs
|°C
|Heatsink temperature
|-
|tmpm
|°C
|Motor temperature
|-
|uaux
|V
|Auxiliary voltage (i.e. 12V system). Measured on pin 11 (mprot)
|-
|pwmio
|
|raw state of PWM outputs at power up
|-
|canio
|
|Digital IO bits received via [[CAN communication#Controlling Digital IO via CAN|CAN]]
|-
|din_cruise
|
|Cruise Control. This pin activates the cruise control with the current speed. Pressing again updates the speed set point.
|-
|din_start
|
|State of digital input "start". This pin starts inverter operation
|-
|din_brake
|
|State of digital input "brake". This pin sets maximum regen torque (brknompedal). Cruise control is disabled.
|-
|din_mprot
|
|State of digital input "motor protection switch". Shuts down the inverter when =0
|-
|din_forward
|
|Direction forward
|-
|din_reverse
|
|Direction backward
|-
|din_emcystop
|
|State of digital input "emergency stop". Shuts down the inverter when =0
|-
|din_ocur
|
|Over current detected
|-
|din_bms
|
|BMS over voltage/under voltage
|-
|cpuload
|%
|CPU load for everything except communication
|}

== Tuning Guide ==
First you want to find a flat surface - a parking lot etc. so you can drive and stop without checking traffic. Change only one parameter at a time and save settings that work!

1. set fslipmin so that you feel car taking off smoothly and try to change it by +/-0,1Hz and check differences in starting. Save when satisfied.

2. lower boost value in 100 point until motor jitters at start. Then return it to last good value.

3. try lowering ampmin in 0,1 increments and observe throttle travel. When throttle is not just smooth but becomes sluggish return some previous increments until throttle reaction is acceptable.

4. change fweak value in +/-10Hz increments from starting point and observe torque in starting. This value is very dependent on battery voltage and is very subjective.

Now you find a hill or ramp and set car on it. You want to hold car in position on slope just using throttle pedal. If there parameters are not good motor will jump or will feel sluggish

1. add boost if motor is oscillating if it is smooth reduce it in 100 point increments until you get oscillation. Then return to last good value

2. reduce/increase ampmin in 0,25 increments untill you get oscilation in motor and return last good value

Now set the car into a hill to set fslipmax. Warning full throttle will be used. Be sure there is no other traffic!

Set fslipmax to chosen value (guess it at 2xfslipmin if you have no other way) and try to take off with full throttle.

If car feels sluggish with full throttle you have to add more slip.

If motor starts to jitter there is too much slip. Try to reduce it in 0.1Hz increments.

When you feel satisfied with settings save them and go on setting regen and braking effect.

EV Conversion Parts

2020-05-07T17:39:06Z

Mdrobnak: Re-order motor list, add Tesla charger links.

== Motors ==

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

== Batteries ==
CALB 
LG Chem - BMW Hybrid 
LG Chem - BMW I3 
LG Chem - Chevy Volt 
LG Chem - Chrysler Pacifica Hybrid 
Tesla 

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]] 
Chevy Volt / Lear 
[[Tesla Model S/X Charger|Tesla Gen 2 10kW(?)]] 
[[Tesla Model 3 Charger/DCDC ("PCS")|Tesla PCS]]

== DC/DC ==
Chevy Volt / Lear 
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

EV Conversion Parts

2020-05-07T17:33:27Z

Mdrobnak: Fix formatting, expand Tesla chargers.

== Motors ==

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

== Batteries ==
CALB 
LG Chem - BMW Hybrid 
LG Chem - BMW I3 
LG Chem - Chevy Volt 
LG Chem - Chrysler Pacifica Hybrid 
Tesla 

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]] 
Chevy Volt / Lear 
Tesla Gen 2 10kW(?) 
Tesla PCS

== DC/DC ==
Chevy Volt / Lear 
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

EV Conversion Parts

2020-05-07T14:52:21Z

Mdrobnak: Note generation of Nissan Leaf motors

== Motors ==

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57 (Gen 2)]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]] (Gen 1)
* Remy HVH-250

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

== Batteries ==
CALB

LG Chem - BMW Hybrid

LG Chem - BMW I3

LG Chem - Chevy Volt

LG Chem - Chrysler Pacifica Hybrid

Tesla

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]]
Chevy Volt / Lear
Tesla

== DC/DC ==
Chevy Volt / Lear
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

EV Conversion Parts

2020-05-04T21:02:09Z

Mdrobnak: Fix Leaf motor names

== Motors ==

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM57]]
* [[Configuration Files#Nissan Leaf Motor|Nissan Leaf EM61]]
* Remy HVH-250

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

== Batteries ==
CALB

LG Chem - BMW Hybrid

LG Chem - BMW I3

LG Chem - Chevy Volt

LG Chem - Chrysler Pacifica Hybrid

Tesla

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]]
Chevy Volt / Lear
Tesla

== DC/DC ==
Chevy Volt / Lear
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

EV Conversion Parts

2020-05-04T20:22:10Z

Mdrobnak: /* PMSM (Permanent Magnet Synchronous Motors) - Requires FOC Firmware: */

== Motors ==

=== PMSM (Permanent Magnet Synchronous Motors) ===
These Requires [[Using FOC Software|FOC Firmware]].
* Nissan Leaf LM57
* Nissan Leaf LM61
* Remy HVH-250

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

== Batteries ==
CALB

LG Chem - BMW Hybrid

LG Chem - BMW I3

LG Chem - Chevy Volt

LG Chem - Chrysler Pacifica Hybrid

Tesla

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]]
Chevy Volt / Lear
Tesla

== DC/DC ==
Chevy Volt / Lear
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

EV Conversion Parts

2020-05-04T20:21:21Z

Mdrobnak: Add initial list of parts

== Motors ==

=== PMSM (Permanent Magnet Synchronous Motors) - Requires [[Using FOC Software|FOC Firmware]]: ===
* Nissan Leaf LM57
* Nissan Leaf LM61
* Remy HVH-250

=== AC Induction Motors ===
* Siemens 1PV5135-4WS14

== Batteries ==
CALB

LG Chem - BMW Hybrid

LG Chem - BMW I3

LG Chem - Chevy Volt

LG Chem - Chrysler Pacifica Hybrid

Tesla

== Brakes ==
Vacuum Pump 1

== Charger ==
[[Battery Charging|Built-In]]
Chevy Volt / Lear
Tesla

== DC/DC ==
Chevy Volt / Lear
Prius Inverters

== High Voltage Junction Box ==
Building a junction box

== Power Steering ==
Power Steering Pump 1

OEM Repurposing

2020-05-04T19:58:49Z

Mdrobnak: Break out repurposed hardware into its own page.

= Open Inverter Tesla Boards =
* [[Introduction Tesla|Introduction]]
* [[Files Tesla|Schematics, pcb layouts, BOMs and Gerber files]]
* [[Where to buy Tesla|Where to buy]]
* [[Support forum Tesla|Support forum]]
* [[Trouble Shooting|Trouble Shooting]]
* [[Setup FAQ|Tesla setup FAQ]]

= Ford Ranger TIM inverter =
* [[Introduction TIM|Introduction]]
* [[Schematics and connector pinout]]
* [[Modifications to original wiring]]
* [https://openinverter.org/forum/viewtopic.php?f=16&t=186#p2349 Hardware installation]
* [https://openinverter.org/shop/index.php?route=product/product&product_id=59 Where to buy]

= Open Inverter Kits =
* [[Using FOC Software]] - This is for use with Permanent Magnet motors (Nissan Leaf, Prius, Remy HVH250, etc.)
* [[Nissan Leaf Gen2 Board]]
* [[Toyota Prius Gen2 Board]]
* [[Toyota Prius Gen3 Board]]
* [[Lexus GS450h Inverter]]