• Flying ADC 16 channel BMS - community edition

This BMS has up to 16 cell voltage inputs, one current sensor input and two temperature sensor inputs.

It can be cascaded for larger battery packs.

  • Continuous transmission of aggregated cell data (min/max/avg voltage and temperature)
  • Continuous transmission of pack data (charge/discharge limit, SoC, current, pack voltage)
  • Single cell voltage obtainable via CANopen SDO
  • Automatic module addressing scheme, no jumpers needed
  • Configuration via ESP Web interface or command line tool
  • SoC estimation by configurable SoC lookup table
  • Continuous SoC calculation via current sensor integration
  • Bidirectional balancing, low cells can be charged individually, high cells discharged

For more details read the wiki page.

The community edition comes without personal support by me but you can get help at the forum. If you want personal support you can buy Engineering Hours.

You can print yourself an enclosure with this design: https://github.com/jsphuebner/FlyingAdcBms/tree/master/enclosure

Software is upgradable via CAN or SWD/JTAG.

No connectors are included, pick a 17-pin 2.54mm header for cell voltage inputs, 8-pin header for temperature sensor and current sensor, and 6-pin 3.81 mm header/cage clamp for 12V supply and CAN.

Write a review

Note: HTML is not translated!
   Bad           Good

Flying ADC 16 channel BMS - community edition

  • Product Code:bms16
  • Availability:21
  • 79.00€


  • 5 or more 69.00€

Related Products

ESP32 CAN Web Interface & datalogger - community edition

ESP32 CAN Web Interface & datalogger - community edition

This board lets you connect to all your openinverter devices on the CAN bus. It allows toUpgrade the..

69.00€