Rear SDU Coolant port
Posted: Sat Apr 18, 2026 3:26 pm
I have created some 3D print files for the coolant port on the Model S small rear drive unit. I think the front ones might be the same.
Described in wiki here:
https://openinverter.org/wiki/Tesla_Mod ... 2)#Cooling
and I have uploaded on printables here:
https://www.printables.com/model/169316 ... olant-port
Described in wiki here:
https://openinverter.org/wiki/Tesla_Mod ... 2)#Cooling
and I have uploaded on printables here:
https://www.printables.com/model/169316 ... olant-port