Leaf motor and 36KWh of cells
Posted: Fri Jun 13, 2025 9:28 pm
It's been a while and my project has ground to a halt, so I'm looking to pass on what I have.
I have 500 of the cells discussed here: viewtopic.php?p=6302#p6302 I got copper bus-bars made for creating packs, I went with 4s in the end. I have enough to make 10 4s/12p units. The link in the thread appears to be dead so I've attached the datasheet.
I also have leaf motor and inverter with an openinverter board in it.
Any reasonable offer considered.
I have 500 of the cells discussed here: viewtopic.php?p=6302#p6302 I got copper bus-bars made for creating packs, I went with 4s in the end. I have enough to make 10 4s/12p units. The link in the thread appears to be dead so I've attached the datasheet.
I also have leaf motor and inverter with an openinverter board in it.
Any reasonable offer considered.