Page 1 of 1
ZombieVerter Parameters
Posted: Mon Dec 30, 2024 6:41 pm
by tom91
I have found some time in my vacation to work on the parameter documentation for Zombieverter
https://openinverter.org/wiki/Zombiever ... pot_Values
This is a work in progress. It would be very likely more sub pages are needed to explain functions and interactions as otherwise the tables get too big.
I would appreciate it if some feedback can be given or contributions made to the documentation. Specifically looking for:
- wiring diagrams in combination with parameter sets
- Component specific pages that interact with zombie/params
Re: ZombieVerter Parameters
Posted: Mon Dec 30, 2024 7:56 pm
by tom91
Idea would be for others to create pages in the catagory of "ZombieVerter" with specifics so it can be linked and the main ZombieVerter page can be broken into specific subsections for easier readablity
https://openinverter.org/wiki/Category:ZombieVerter
Re: ZombieVerter Parameters
Posted: Tue Dec 31, 2024 3:28 am
by Iceman96
Great initiative Tom - I am just at the testing stage on my conversion so some very usefull info here. I have started working on an excel lookup file that you can paste the downloaded parameter file into to show what eack input is, rather than just a number
Re: ZombieVerter Parameters
Posted: Tue Dec 31, 2024 12:07 pm
by tom91
Iceman96 wrote: ↑Tue Dec 31, 2024 3:28 am
parameter file into to show what eack input is, rather than just a number
Yes that is a good tool for the offline review of params.
Re: ZombieVerter Parameters
Posted: Tue Dec 31, 2024 1:25 pm
by snelly
Great info.
Re: ZombieVerter Parameters
Posted: Fri Jan 03, 2025 10:31 am
by Rustybkts
tom91 wrote: ↑Mon Dec 30, 2024 6:41 pm
I have found some time in my vacation to work on the parameter documentation for Zombieverter
https://openinverter.org/wiki/Zombiever ... pot_Values
This is a work in progress. It would be very likely more sub pages are needed to explain functions and interactions as otherwise the tables get too big.
I would appreciate it if some feedback can be given or contributions made to the documentation. Specifically looking for:
- wiring diagrams in combination with parameter sets
- Component specific pages that interact with zombie/params
This is a really great idea and I'll add to the documentation when my project is running.
Spot values descriptions would be an asset as I assume many are only displayed under certain configurations.
Re: ZombieVerter Parameters
Posted: Fri Jan 03, 2025 11:50 am
by tom91
Rustybkts wrote: ↑Fri Jan 03, 2025 10:31 am
Spot values descriptions would be an asset as I assume many are only displayed under certain configurations.
Correct I am working through them, as said the page is a WIP.