Upload failed? get spinning wheel.

Discussion about various user interfaces such as web interface, displays and apps
Post Reply
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Upload failed? get spinning wheel.

Post by joromy »

Continue from here:
viewtopic.php?f=7&t=563#p7016

Yes will certainly do fresh update of ESP module firmware and SPIFFS.
How do I know what version of ESP firmware SPIFFS I have?
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
arber333
Posts: 3241
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 74 times
Been thanked: 223 times
Contact:

Re: Upload failed? get spinning wheel.

Post by arber333 »

joromy wrote: Sun Feb 23, 2020 9:03 pm How do I know what version of ESP firmware SPIFFS I have?
Your case was similar to mine a year ago. It also locked up Olimex and i had to upload firmware through ST-link. ESP and spiffs were one of the first i got from Johannes. Not updated.
User avatar
dima
Posts: 157
Joined: Sun Dec 09, 2018 9:35 pm
Location: Canada

Re: Upload failed? get spinning wheel.

Post by dima »

Since you have your custom board, maybe you have something similar to Damien's issue with Tesla board.

User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

Re: Upload failed? get spinning wheel.

Post by joromy »

Thank you, Have got the board reflashed with ST-link, and it's working again.

I will remove the resistor anyway.
Have followed the olimex setup with 10k/0.1uF reset, have this issue come up with the olimex boards to?

Have updated the ESP module and u/l new SPIFFS.
I'm not able to get the same error, have tried several times.

So this fault seems to be to old inverter firmware.
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
Post Reply