openinverter forum

Kit comprises,

10 Metres 35mm2 Cable cut at about 4 metres length
Type 2 socket with 3d printed mount and cable release
Initialised IVT-S shunt with connectors
2 x TE 2138011 Contactors with 15.3 ohm coils
RGB led control button
LIM-AC-DCO module (the one with the MAC address)
Lim relevant sockets and terminals
EVcreate Voltage sense board and terminals

Volt sense board, ISA-shunt, Lim module, Lim connector kit and contactors are listed on the Evcreate web site excluding vat and postage for a total of E811.50 i.e. £683.48

Please PM me if you want to make an offer.

Thanks

I am happy to sell the ISA shunt seperately if anyone already has one or take other parts out of the kit for a reduced price. I am hoping to get about £600 for the complete kit or £450 without the shunt. I am also open to offers for any combination of the parts, within reason.