openinverter forum

Posted: **Wed Jan 03, 2024 10:53 am**

Hi,

did anyone actually take a Gen2 Charger apart?
I have 2 with one bad phase each here and thought I could make one perfect charger out of them. But damn, how do you get the phase modules out there?
I removed the cooling plate, but no additional screws there.

Probably need to unsolder the phase control module. But that would kill that project, I guess.

Thanks,
Marco

Posted: **Wed Jan 03, 2024 12:22 pm**

levelnull wrote: ↑Wed Jan 03, 2024 10:53 am Hi,

did anyone actually take a Gen2 Charger apart?
I have 2 with one bad phase each here and thought I could make one perfect charger out of them. But damn, how do you get the phase modules out there?
I removed the cooling plate, but no additional screws there.

Probably need to unsolder the phase control module. But that would kill that project, I guess.

Thanks,
Marco

Well yes. If you would use both of them and only turn on individual phases... you could still use 3 phases.

Posted: **Wed Jan 03, 2024 4:30 pm**

No, thats not a good option I guess

needs too much space and weight.

Posted: **Wed Jan 03, 2024 5:27 pm**

levelnull wrote: ↑Wed Jan 03, 2024 4:30 pm No, thats not a good option I guess
needs too much space and weight.

There is a video from EVclinic where Vanja is refurbishing failed diodes on one gen3 unit:

Maybe you can contact him and ask for price of repair?

This one is for Gen2 i think...

openinverter forum

Teardown Tesla Gen2 10 kW charger

Teardown Tesla Gen2 10 kW charger

Re: Teardown Tesla Gen2 10 kW charger

Re: Teardown Tesla Gen2 10 kW charger

Re: Teardown Tesla Gen2 10 kW charger