openinverter forum

Hi all, hope you have an easy fix.
I am having trouble with initiating all three modules on the charger. If I set it to manual 3p it only turns on one module not all 3. I can swap from charger 1,2or 3, but individually.
I am on the latest firmware and have the gen 3 charger on the v3 board.
Each one of the modules charge beautifully, but not together.

Any ideas would be great please.
Thanks in advance

It's a flag field. Set it to 7 with the custom command function "set chargerena 7"

That’s amazing thank you.
I will try first thing.