openinverter forum

Integration of LCD BMS.

Im happy how it looks like. It need's to be more fabricated and painted in black . To be fully integrated in car.
I really enjoy doing this.

Second is for lexus gearbox

Fabulous build

Would it be possible to post the photos direct to the forum and not via a third party hosting site in future? So many forums have been destroyed when hosts change policies and no longer host for free. Many thanks

Tnx

Is not a problem. It was in my habit to put pictures like this.

Amazing. Inspiration for my e39 touring build. I'm caught between this and the Lexus route.

TNX , Lexus drivetrain , you don't have nothing to think about.
2.5 years ago when I bouhgt warp and zilla, there was no lexus... Only bmw cupe with no open source controller. Now I also bought lexus, but voltage with tesla battery is to small for some performance . Let it stay. Maybe I catch another inspiration for some other project .

I bought e46 pedal and zeva digital pot adapter. They customise pot adapter to my e46 pedal. I find that best and the safest solution for throttle. Better then analog . I could done this with arduino and digital arduino pot , but It is to dangerous to play with. I need to be 100% sure that will work. On the bench work perfect. it goes 0-100%
hood for box is finish.
Also bought some wirening.

Nice. Could you explain why this is a safer solution? It's still signal (but now as a variable resistance instead of voltage) that has to reach the controller. Instead of a direct 0-5V signal to the controller that is converte to digital over there you have now added an extra component that can potentially fail?

Bentto wrote: ↑Thu Mar 05, 2020 6:55 am Nice. Could you explain why this is a safer solution? It's still signal (but now as a variable resistance instead of voltage) that has to reach the controller. Instead of a direct 0-5V signal to the controller that is converte to digital over there you have now added an extra component that can potentially fail?

I mean , it is safer solution to buy this thing when allready exist, then trying to make my own with arduino. I don't know if I'm able to make it reliably. Yes I know I will learn something, but it needs more time, and without this I have enough work to do...
Other thing is that Zilla reads resistance from 150R-4K8. Not voltage.. Hall sensor work with voltage. So I need convert voltage from 0-5V to resistance of 0-5K (). IF I use alanog pot, during time of using you can get twitches on the motor because of spending mecanical pot...
E46 throtle pedal gives signal from 0.8V-4.0V , so they needed to customize digital pot.
It also have zilla hairbal that work with hall sensor , but in my case is not that.

Ok, clear Following the build with much interest.

I purchased gopro 7 black , so I decided to open youtube channel and make some video. why the hell not
This is the first introduction video.
I is not like I imagine at first , but is ok . Sorry for my bad english.

I have second video.
I need to work a little bit on my audio.

happy Easter to all who celebrate,

I have new video

What a great project

Tnx. And sorry for bad audio quality. Didn't have time and will to play with it.

Finnaly the real thing

Seat heating and kill switch

Great job. Keep up a good work.

Tnx

Plastic covered

Finnaly my last battery pack that I needed to put in the car.
and finnaly fully load.

This is impressive work, I'm inspired.

tnx