Page 1 of 1
EM57 ZE1 motor, last connector pinout question
Posted: Mon Jun 05, 2023 10:39 am
by mnmn
Hello, I have a ZE1 Leaf stack, with complete wiring (fortunately).
The connector at the end of the signal wires looks like this:
Can you please help me showing the pinout of this connector?
And where can I buy a mating connector to it?
Thank you in advance
Re: EM57 ZE1 motor, last connector pinout question
Posted: Mon Jun 05, 2023 10:50 am
by ginetto
I found harness and wiring diagram fo ZE1
PM with your email to sent it or better allow admin to attach a larger file (20MB)
mnmn wrote: ↑Mon Jun 05, 2023 10:39 am
Hello, I have a ZE1 Leaf stack, with complete wiring (fortunately).
The connector at the end of the signal wires looks like this:
image.png
Can you please help me showing the pinout of this connector?
And where can I buy a mating connector to it?
Thank you in advance
Re: EM57 ZE1 motor, last connector pinout question
Posted: Mon Jun 05, 2023 1:09 pm
by mnmn
You are great, thank you!
I have just sent you a PM.
Re: EM57 ZE1 motor, last connector pinout question
Posted: Tue Jun 13, 2023 1:33 pm
by Adamzki
ginetto wrote: ↑Mon Jun 05, 2023 10:50 am
I found harness and wiring diagram fo ZE1
PM with your email to sent it or better allow admin to attach a larger file (20MB)
Hi ginetto. Please could you PM me the diagram too.
Re: EM57 ZE1 motor, last connector pinout question
Posted: Tue Jun 13, 2023 3:42 pm
by ginetto
Adamzki wrote: ↑Tue Jun 13, 2023 1:33 pm
Hi ginetto. Please could you PM me the diagram too.
is there a way to store this pdf in the openinverter space?
I can't attach here due to size
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sun Oct 22, 2023 5:38 am
by Lesterliston
Hello Ginetto and Adamzki, is it possible to forward the connector pinout. It is really hard to go forward on my project because of this new connector. and send it to lesterliston at yahoo.com or ɯoɔ˙ooɥɐʎ@uoʇsᴉlɹǝʇsǝl
Thanks you so much!
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sun Oct 22, 2023 5:20 pm
by johu
ginetto wrote: ↑Tue Jun 13, 2023 3:42 pm
is there a way to store this pdf in the openinverter space?
I can't attach here due to size
just saw this. How large is the file?
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sun Oct 22, 2023 7:55 pm
by ginetto
johu wrote: ↑Sun Oct 22, 2023 5:20 pm
just saw this. How large is the file?
20.5MB
Re: EM57 ZE1 motor, last connector pinout question
Posted: Mon Oct 23, 2023 8:04 am
by johu
Attachment limit raised, try uploading now
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sat Oct 28, 2023 2:42 pm
by ginetto
johu wrote: ↑Mon Oct 23, 2023 8:04 am
Attachment limit raised, try uploading now
here attached you have the ZE1 Network Diagram document where available all harnesses and network
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sat Dec 30, 2023 3:02 pm
by jrbe
johu wrote: ↑Mon Oct 23, 2023 8:04 am
Attachment limit raised, try uploading now
I tried adding this to the wiki but it wouldn't allow it. Said file name was not allowed. It's 2021_nissan_leaf_Network_diagram.pdf
Re: EM57 ZE1 motor, last connector pinout question
Posted: Sat Dec 30, 2023 4:37 pm
by johu
I'll check, maybe I need to enable pdf