Page 1 of 1
Snap-ring tesla front sdu
Posted: Thu Apr 27, 2023 7:40 pm
by Riwi
Hi!
I got a SDU, 1035000-00-J, and I'm trying to find snap-rings for the driveshaft. Its the small ring/clip that keeps the driveshaft in the diff.
Any one got a source for these?
Thanks
Rikard
Re: Snap-ring tesla front sdu
Posted: Fri Apr 28, 2023 2:53 am
by Bratitude
Snap rings generally are not oem specific fyi
Re: Snap-ring tesla front sdu
Posted: Fri Apr 28, 2023 4:14 am
by Zieg
Is it actually a snap ring though, or is it a hog ring (like on an impact gun)?
Re: Snap-ring tesla front sdu
Posted: Fri Apr 28, 2023 6:43 am
by Riwi
Bratitude wrote: ↑Fri Apr 28, 2023 2:53 am
Snap rings generally are not oem specific fyi
Ok, you wouldn’t have the diameter and thickness at hand?
Re: Snap-ring tesla front sdu
Posted: Fri Apr 28, 2023 6:45 am
by Riwi
Zieg wrote: ↑Fri Apr 28, 2023 4:14 am
Is it actually a snap ring though, or is it a hog ring (like on an impact gun)?
Hog ring it is!
Re: Snap-ring tesla front sdu
Posted: Fri Apr 28, 2023 9:19 am
by Aragorn
I think snap ring is a valid term for it, i've always used that term for the rings on the end of CV joints.
They are sized by diameter and wire thickness.
Re: Snap-ring tesla front sdu
Posted: Sat Apr 29, 2023 1:19 am
by Hassleweed
Re: Snap-ring tesla front sdu
Posted: Tue May 09, 2023 9:54 am
by Riwi
Thanks!
32,32mm in diameter.
2.2mm thick.
Re: Snap-ring tesla front sdu
Posted: Sat Aug 12, 2023 9:25 pm
by EV_Builder
the driveshaft company in poland has them (and maybe others too).
