In one housing inverter and motor capacity of 160 kilowatts

Post Reply
yaroslav
Posts: 176
Joined: Tue Aug 13, 2019 4:32 pm
Location: Russia, Stavropol
Has thanked: 14 times
Been thanked: 5 times

In one housing inverter and motor capacity of 160 kilowatts

Post by yaroslav »

Нi. There is a factory inverter with an IPM engine with a capacity of 160 kilowatts. Everything is built into one housing, which is convenient for installation in a car. My friend asked me for help with starting the inverter, it works through the can bus. There is a document with can messages, someone will be interested with its launch?
Attachments
index4.jpg
LOCAL_INV_DBC(1).xlsx
(70.93 KiB) Downloaded 60 times
index3.jpg
index2.jpg
index.jpg
User avatar
catphish
Posts: 954
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 93 times
Been thanked: 179 times

Re: In one housing inverter and motor capacity of 160 kilowatts

Post by catphish »

Drive units like this are great. For DIY'ers, salvage Tesla drive units usually provide more power for a much lower cost, but if I were embarking on a commercial design, I would definitely try to source a drive unit like this.

You may also want co check out https://webshop.swindonpowertrain.com/i ... y&path=115
That's the only other similar unit I was able to find.
Post Reply