openinverter forum

olimex discontinued or have no stock for the olimex STM32-h103 that is included in the old v2 johannes kit.
They only sell GD32-h103.
Because a problem with my STM32-h103 (that is other history) I bought a GD32-h103 but I can not flash because STM32cube software doesnt recognise the chip. Same with zflash app in android.
I have the original usb cable from the v2 kit, and a stlink-v2
So my question is if i have other way to flash the GD32-h103, and if this could do same function in the v2 inverter from johannes.
thanks

Depends how comfortable you are with command line tools, OpenOCD could probably do it?

command line tools is not a big problem as the 220 pages of openocd users manual.
i choose to buy a new stm chip and change into the new board and also avoid compatibilty issues with the code

the ST-Link application, old style, works too in windows.

this was a old thread... I did not got program the GD32-H103 because STlink app is not compatible, so i finally got stock for STM32-chip, unmount the GD32 chip and mount the STM32 and surprise it works.

Also the STM32-H103 is back in stock