openinverter forum

*update 2023-01-31*
new batch of couplers are now available, they are a tighter fit than oem splines!
https://bratindustries.net/product/niss ... coupler-2/


i have a few leaf couplers on sale. they are my rejects, as they are out of tolerance. they are just a bit looser fit on the leaf motors.
https://bratindustries.net/product/niss ... r-coupler/

Nice! I was about to ask when you might have new adaptors in stock as well.

LRBen wrote: ↑Sun Dec 04, 2022 9:07 pm Nice! I was about to ask when you might have new adaptors in stock as well.

I have a few good couplers left, but they are saved for the vw kits currently
But new batch of couplers will be available mid January.

Leaf gearbox drive shaft stubs will be available any minute now:)

LRBen wrote: ↑Sun Dec 04, 2022 9:07 pm Nice! I was about to ask when you might have new adaptors in stock as well.

new updated couplers are back in stock!
https://bratindustries.net/product/niss ... coupler-2/

i have a original used flanged coupler available, its made out of stainless.
has features to fit a 40mm od bearing.
comes with the matting flange, might be of use 200$ cad