Zombieverter BOM question.

Post Reply
User avatar
acollins22
Posts: 33
Joined: Thu May 16, 2019 11:12 am
Location: Leicestershire, UK
Has thanked: 9 times
Been thanked: 6 times

Zombieverter BOM question.

Post by acollins22 »

Hi,

I am looking to buy a ZombieVerter and have downloaded the BOM.

It mentions Header, Enclosure and Connector from here... https://www.aliexpress.com/item/3285777 ... 4c4dWOmGPE

and Wiring Harness from here... https://www.aliexpress.com/item/4001213 ... hBvGO&mp=1

The case is straightforward but the wiring harness images show an enclosure as well as the harness. The description says "Our detail pictures as follows:" and show photos of the case and harness.

Please can anyone clarify if the second link is enough and that I don't need the first any more or that it's a dodgy second picture and I need both. It would save me £27 I could certainly use :-)


Thanks,

Andy.
m.art.y
Posts: 550
Joined: Sat Jun 06, 2020 6:54 pm
Location: UK
Has thanked: 24 times
Been thanked: 17 times

Re: Zombieverter BOM question.

Post by m.art.y »

First link is without wires crimped. So this means you will need to crimp your own wires to the pins that you will receive. Second link has the wires already crimped. So you only need one of them 🙂
User avatar
acollins22
Posts: 33
Joined: Thu May 16, 2019 11:12 am
Location: Leicestershire, UK
Has thanked: 9 times
Been thanked: 6 times

Re: Zombieverter BOM question.

Post by acollins22 »

Thanks M.art.y.

That's just what I needed.


All the best,

Andy
Post Reply