openinverter forum

Hi,

I am looking to buy a ZombieVerter and have downloaded the BOM.

It mentions Header, Enclosure and Connector from here... https://www.aliexpress.com/item/3285777 ... 4c4dWOmGPE

and Wiring Harness from here... https://www.aliexpress.com/item/4001213 ... hBvGO&mp=1

The case is straightforward but the wiring harness images show an enclosure as well as the harness. The description says "Our detail pictures as follows:" and show photos of the case and harness.

Please can anyone clarify if the second link is enough and that I don't need the first any more or that it's a dodgy second picture and I need both. It would save me £27 I could certainly use


Thanks,

Andy.

First link is without wires crimped. So this means you will need to crimp your own wires to the pins that you will receive. Second link has the wires already crimped. So you only need one of them

Thanks M.art.y.

That's just what I needed.


All the best,

Andy