Page 1 of 1
Nissan Leaf Gen2 openinverter board fully assembled
Posted: Sun Nov 06, 2022 10:49 am
by johu
This board comes from my Touran and has served me well for over 4 years. I have now replaced it with the latest revision so it's surplus.
Comes with all connectors including the main harness one.
It has a blown ULN chip since day 2, not a problem if you're not using the digital outputs. ULN chip replaced
Asking 250€.
Bids welcome
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Wed Nov 23, 2022 5:39 pm
by johu
Still up
Will leave home in 10 days, 3 months wait after that
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Tue Aug 15, 2023 7:47 pm
by Jacobsmess
What is the difference between board revisions?
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Wed Aug 16, 2023 7:46 am
by johu
Functionally not much really. The latest run uses the mini mainboard and actually has less IO. Otherwise the ESP8266 has been swapped for an ESP32
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Sun Aug 27, 2023 9:54 pm
by 20R
Is this still available?
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Mon Aug 28, 2023 5:39 am
by johu
Yes
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Mon Aug 28, 2023 6:23 pm
by 20R
Great. Sounds promising. Quick question: Can this board cover VCU duties for the build (as well as inverter control) or would i need an external VCU product (ex resolve or zombieverter)to cover the basic imputs/outputs to control the car?
I am doing gen 2 leaf (PM 56 motor/inverter/pdm) conversion to an old 1980 Toyota pickup (pre vcu days).
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Mon Aug 28, 2023 7:39 pm
by Bratitude
20R wrote: ↑Mon Aug 28, 2023 6:23 pm
Great. Sounds promising. Quick question: Can this board cover VCU duties for the build (as well as inverter control) or would i need an external VCU product (ex resolve or zombieverter)to cover the basic imputs/outputs to control the car?
I am doing gen 2 leaf (PM 56 motor/inverter/pdm) conversion to an old 1980 Toyota pickup (pre vcu days).
It won’t control the pdm in any matter, just covers motor control
Re: Nissan Leaf Gen2 openinverter board fully assembled
Posted: Wed Aug 30, 2023 4:36 pm
by johu
Indeed, it just adds contactor control and some analog and digital inputs, e.g. throttle pot. Requires a custom wire loom though.