Controlling a ID.3 motor inverter?

Forum on Volkswagen related hardware, so VW, Audi, Seat, Skoda etc.
Post Reply
ChristerE
Posts: 4
Joined: Mon Sep 26, 2022 5:43 pm
Location: Sweden, Stockholm
Been thanked: 2 times

Controlling a ID.3 motor inverter?

Post by ChristerE »

Has anyone succeeded in controlling / communicating via CAN ID.3 motor inverter? Or have rebuilt a VW inverter with openinverter.org Brain Board Rev 3 ?
Have started an electric car conversion project where I have an engine from an ID.3 and inverter. But can't control it need to get in touch with someone who has done it or is about to do it. Need help moving on!
User avatar
Jack Bauer
Posts: 3563
Joined: Wed Dec 12, 2018 5:24 pm
Location: Ireland
Has thanked: 1 time
Been thanked: 87 times
Contact:

Re: Controlling a ID.3 motor inverter?

Post by Jack Bauer »

CAN logs here to get you started : https://github.com/DomT177/GolfGTE
I'm going to need a hacksaw
Ruudi S
Posts: 55
Joined: Sun Apr 12, 2020 2:02 pm
Location: EU Estonia
Has thanked: 13 times
Been thanked: 13 times
Contact:

Re: Controlling a ID.3 motor inverter?

Post by Ruudi S »

I have also one MEB platform motor and inverter unit at my workplace. It's really strange that no one hasn't got it running yet, the cars have been available a few years already.
Post Reply