openinverter forum

Hi. New member here located in Ireland. I recently bought a Leaf stack (motor, inverter & DC/DC. It was bought as a bit of an impulse buy and I'm currently not sure what I want to put it in. I was thinking about mid mounting in something but if I go this way I' d like to use the Leaf transaxle rather than mate the motor to a manual box.

Does anyone have a cheap transaxle or better yet transaxle & drives or maybe a full Leaf front subframe set up for sale in Ireland. I would even consider a cheap broken transaxle just to use for checking figment in whatever I decide to convert.

I got gearboxes and driveshafts here in Sweden. Leaf EM57

Thanks. I'll try find something more local first as I'd say shipping will be a killer

Depends where you are in the country but, I always find Kilcock dismantlers reasonable for anything ev or hybrid related. When I got my stack up there when I was doing my conversion on the Audi, there were 3-4 Leaf's sitting in the lot, some I would say for a few years by the state of them. Try Calvin too in ev-breakers up in Newry. Might have one he's willing to let go at a decent price.
Any ideas what you might convert?

I have one from env200 don't have shafts but I'll check if leaf shafts fit.

Thanks folks. No definite plans on what to convert yet. Thinking about putting the stack in the back of an MGB but I've also been drawn to the GS450h or GS300h transmission for a red conversion in maybe something like an RX8 or some BMW..

Hi there, I have a transaxle, drives and subframe from a 2015 Leaf. I can also deliver if you like.

Can you let me know a price and location please. PM if you prefer.