Precharge and Contactor Control  [SOLVED]

Introduction and miscellaneous that we haven't created categories for, yet
User avatar
Renegate2020
Posts: 50
Joined: Tue Dec 01, 2020 6:20 am
Location: Odessa UA
Has thanked: 1 time
Contact:

Re: Precharge and Contactor Control

Post by Renegate2020 »

From November 2021
User avatar
E46Driver
Posts: 32
Joined: Fri Sep 17, 2021 3:51 am
Location: Alberta
Has thanked: 2 times
Been thanked: 5 times

Re: Precharge and Contactor Control

Post by E46Driver »

Sounds like it should be reliable. I have done the same. Hope to never have to worry about it again!
ElMaco
Posts: 3
Joined: Sat Jul 15, 2023 2:18 pm
Has thanked: 1 time

Re: Precharge and Contactor Control

Post by ElMaco »

Was there any general conclusion to this?
Were @E46Driver’s issues related to the added peripheral equipment, or to the Leaf Gen 2 board (alt the mainboard)?

Would you advice to add a 1 sec delay to the main contractor just to be safe, or is it just needed under certain circumstances?
jrbe
Posts: 265
Joined: Mon Jul 03, 2023 3:17 pm
Location: CT, central shoreline, USA
Has thanked: 92 times
Been thanked: 65 times

Re: Precharge and Contactor Control

Post by jrbe »

For those of you with this early pulse, did newer versions of the code eliminate it? Trying to follow up on this for the gen 3 leaf adapter board. Looking into implementing the suggestions listed here but I don't want to add delays to the contactors if it's not an issue.
Post Reply