CCS2 Chargeport from ID3/ID4

Forum on Volkswagen related hardware, so VW, Audi, Seat, Skoda etc.
Post Reply
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

CCS2 Chargeport from ID3/ID4

Post by EV_Builder »

Someone knows the schematic / wiring colours meanings of this part?

Anyone an idea how to obtain the schematic?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
User avatar
SuperV8
Posts: 148
Joined: Wed Mar 24, 2021 2:57 pm
Has thanked: 43 times
Been thanked: 10 times

Re: CCS2 Chargeport from ID3/ID4

Post by SuperV8 »

VAG have an online portal for service information: I think for around 10€ per hour to download info required.

https://erwin.volkswagen.de/erwin/showDSP.do

Parts schematic - seems lots of part number versions for different PR codes. Number 1 includes 19, 20 & 21.
image.png
LRBen
Posts: 471
Joined: Thu Jul 04, 2019 6:35 pm
Location: Somerset, UK
Has thanked: 42 times
Been thanked: 99 times

Re: CCS2 Chargeport from ID3/ID4

Post by LRBen »

I have a VW CCS charge port, just been figuring out the pinout this evening. Little late but I hope this helps for anyone else looking.

4 pin connector to interlock. 1J0973704 is the connector for this.
1. Lock drive - 12v to open
2. Lock feedback
3. Lock feedback
4. Lock drive + 12v to close

10 pin connector. 1J0073715 is the connector for this one.
1. LED ground
2. LED red 12v
3. LED green 12v
4. LED yellow 12v
5. PP
6. CP
7. Temp sender?
8. Temp sender?
9. Temp sender?
10. Temp sender?
Mitchy
Posts: 82
Joined: Sun Nov 14, 2021 12:16 pm
Has thanked: 2 times
Been thanked: 35 times

Re: CCS2 Chargeport from ID3/ID4

Post by Mitchy »

If it’s like the taycan or etron chargers. The DC line plugs are made by rosenberger
https://products.rosenberger.com/power/ ... ngle-jack#

You can also get the STL file of the port from Phoenix Contact

Phoenix Contact use the same base wire colors out of all their ports

White - CP
Black - CS
Gray - AC plug temp +
Brown - analog ground (two wires, one for the AC temp sensor, the other for the DC temp sensors)
Yellow- DC+ temp
Green - DC- temp

Plug lock:
Brown/Blue - Lock motor -
Blue/Red - Lock motor +
Blue/Yellow - Lock Sense
Blue/Green - Lock Sense (Gnd)
Screen Shot 2023-05-05 at 9.07.19 PM.png
If it's like the newer ID4/Q4 E-Tron, the wire colors are slightly different:
Screen Shot 2023-05-05 at 9.05.08 PM.png
Screen Shot 2023-05-05 at 9.04.44 PM.png
User avatar
crasbe
Posts: 234
Joined: Mon Jul 08, 2019 5:18 pm
Location: Germany
Has thanked: 43 times
Been thanked: 97 times

Re: CCS2 Chargeport from ID3/ID4

Post by crasbe »

It would be awesome if someone could transfer the information to the Wiki. This is really useful :)

I created a page for it with the right categories, so "just" the content that's left :D
https://openinverter.org/wiki/VAG_CCS2_Charge_Port
Post Reply