Hello !
My name is Boris, I live in Kyrgyzstan, Bishkek, I am 50 years old, all my life I have been engaged in electronics, radio electronics, auto electronics, etc.,
I am well versed in it, I have a lot of experience in this matter, for the last 14 years I have been repairing hybrid cars, I have been watching for a long time
your projects, an incredibly interesting topic, I found a lot of useful information from you, but unfortunately in my country to implement such
a self-made project is practically impossible due to technical and financial difficulties, so I use factory electric vehicles,
I have been driving electric cars since 2012.
The first was a Chevrolet Volt 2011, I bought it badly broken in 2012, then a Nissan Leaf AZEO in 2015,
then Rav4ev 2014 brought in 2018, they were all sold at different times after operation and now I drive a Chevrolet Bolt 2017, all
brought broken, restored and used without problems.
Last year I bought Rav4ev 2014 again, two cars, both faulty, this time without damage to the body, only some kind of malfunction,
I took a chance again , shipping them from the USA took almost 7 months, I live very far from the USA and now everything is very difficult in terms of logistics.
The malfunction, as one would expect, is classic for Tesla MS LDU - oil seal leakage and a full motor of antifreeze, since antifreeze is there
was inside the engine for a very long time, then the wiring, the DI control board, the low-voltage connector of the external wiring and the winding insulation rotted
engine was 380kOhm !!
I dried one engine, dried it for almost a month, now there is 30mOhm and it is already possible to assemble and try work. I got almost everything I need.
me components - oil seals, bearings, all parts for assembling new wiring (the original wiring rotted completely), but I can’t find
only the inverter control boards and one low-voltage connector (the connector inside it also rotted).
A big request to everyone, I think that you still have the original boards from LDU Tesla MS, can I buy these boards from you? me now
you need two boards and one connector, I'll solder the new wiring.
( english with google translator )
with best regards, Boris
https://drive.google.com/drive/folders/ ... sp=sharing
https://drive.google.com/drive/folders/ ... sp=sharing
https://drive.google.com/drive/folders/ ... sp=sharing