CAN IO interaction with physical IO

Post Reply
User avatar
catphish
Posts: 954
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 93 times
Been thanked: 179 times

CAN IO interaction with physical IO

Post by catphish »

Please could someone confirm how Openinverter's CAN IO function interacts with physical inputs?

Are they simply OR'd together, or is CAN able to override the physical input?
tom91
Posts: 1272
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 201 times

Re: CAN IO interaction with physical IO

Post by tom91 »

Correct it is or'ed I checked as had a setup running.

Also configuration of IO for can bus settings is explained here: https://openinverter.org/wiki/CAN_communication
Founder Volt Influx https://www.voltinflux.com/
User avatar
catphish
Posts: 954
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 93 times
Been thanked: 179 times

Re: CAN IO interaction with physical IO

Post by catphish »

tom91 wrote: Sun May 29, 2022 8:33 pm Correct it is or'ed I checked as had a setup running.

Also configuration of IO for can bus settings is explained here: https://openinverter.org/wiki/CAN_communication
Thanks, I read that and believe I understand how to use it. It implied that they must be OR'd (because it seems you inject zeros for ports that are still going to be physical), but wanted to double check.

My car has a big button in the middle of the dash, my intention is to use it as both a start button and a cruise control button (depending on inverter state).
Post Reply