openinverter forum

m.art.y wrote: ↑Thu May 26, 2022 3:28 am Anybody would be interested in Tesla BMS slave boards?

Bratitude wrote: ↑Fri May 27, 2022 3:05 pm

m.art.y wrote: ↑Thu May 26, 2022 3:28 am Anybody would be interested in Tesla BMS slave boards?

model s/x ?

how much? for a full 96s set

nkiernan wrote: ↑Thu May 26, 2022 7:26 am I would take Tesla Model 3 slave boards???

m.art.y wrote: ↑Sun May 29, 2022 5:21 pm No Tesla model 3 ones yet, if they become available I will let you know. There was an entire Tesla model 3 battery which had couple modules out of order though.

nkiernan wrote: ↑Thu May 26, 2022 7:26 am I would take Tesla Model 3 slave boards???

m.art.y wrote: ↑Wed Jun 08, 2022 4:21 pm Would you be interested in complete Tesla model 3 BMS?

nkiernan wrote: ↑Wed Jun 08, 2022 7:35 pm Do you mean the black High Voltage Junction box + the four slave boards + the loom to connect them?

m.art.y wrote: ↑Wed Jun 08, 2022 8:11 pm You asked for just the slave boards right? Did your modules come without them and how many you'd need? Preferably would just sell the complete BMS from that battery box.

nkiernan wrote: ↑Wed Jun 08, 2022 8:18 pm Yes, all I really need is the PCB slave board taken from the battery modules themselves. I'd take a set of four from a full pack, but one might do

victor_norberg wrote: ↑Mon Nov 21, 2022 4:22 pm Let me know if there are slave boards left to purchase

m.art.y wrote: ↑Fri Aug 26, 2022 12:55 pm Just because Teensy 3.2 boards are hard to obtain and I have a stock of those I will include a Teensy 3.2 board free of charge with a purchase of a set of Tesla BMS slaves.

joeflickers wrote: ↑Thu May 11, 2023 5:55 am im looking for way to DIY the simps bms with teensy 3.2 board,do you have any documentation or schematics?