2018 Tesla AC Hanon HES33 compressor

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
Dylan Witt
Posts: 116
Joined: Sat Apr 18, 2020 4:23 am
Location: Kentucky, USA
Been thanked: 1 time

2018 Tesla AC Hanon HES33 compressor

Post by Dylan Witt »

im working on a electric Mazda rx8, i bought this ac compressor thinking it would be easy to communicate with it, but found a forum where the canbus data hasn't been hacked, so i went ahead and took the control board off the back of the compressor. here are a few pictures of it. anyone have any ideals for me on making it easy to work with would be appreciated
Attachments
4.jpg
6.jpg
7.jpg
5.jpg
3.jpg
2.jpg
1.jpg
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: 2018 Tesla AC Hanon HES33 compressor

Post by EV_Builder »

Ok now build it back together and install it because we need/ can focus on implementation. Is this the same as 'my' partnumber?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
Dylan Witt
Posts: 116
Joined: Sat Apr 18, 2020 4:23 am
Location: Kentucky, USA
Been thanked: 1 time

Re: 2018 Tesla AC Hanon HES33 compressor

Post by Dylan Witt »

Going to use a while controller, with an Arduino monitoring pressures of the ac system, throttle the ac compressor according to pressure and temp. Currently a thinking of this ideal
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: 2018 Tesla AC Hanon HES33 compressor

Post by EV_Builder »

Do you know the sensors voltage / resistance per pressure and temperature?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: 2018 Tesla AC Hanon HES33 compressor

Post by EV_Builder »

Dylan Witt wrote: Sat May 21, 2022 2:11 am Going to use a while controller, with an Arduino monitoring pressures of the ac system, throttle the ac compressor according to pressure and temp.
What is a "while controller"?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
Dylan Witt
Posts: 116
Joined: Sat Apr 18, 2020 4:23 am
Location: Kentucky, USA
Been thanked: 1 time

Re: 2018 Tesla AC Hanon HES33 compressor

Post by Dylan Witt »

ebike controller, 120 volt dc.
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: 2018 Tesla AC Hanon HES33 compressor

Post by EV_Builder »

Ok you think it won't work out the box? With that voltage?
We might be able to modify the sensing circuit into thinking that 400 is there?
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
Post Reply