openinverter forum

I have adapter plates available now for the em57(Gen2+) Nissan Leaf motor.

-6061 machined aluminum
-Matt vibrate finish
-NEMA B-face bolt pattern
-counter sunk holes for flat matting surface
-5lbs

375$ CAD

Available in my web shop
www.bratindustries.net

couplers for both em61 and em57 are also available

’ve been taking a bunch of different vehicle bellhousing to my budies metrology lab, we are working on creating a open repository of standardized adapter plates for different vehicles!

I want to make mounting all these oem motors dead simple and inexpensive

Brilliant work

Jack Bauer wrote: ↑Sun Mar 13, 2022 9:16 am Brilliant work

Cheers, do you know what transmission is in your triton? Yours is a gen4 diesel, correct?

This is very cool. I'm wondering does anyone know a good source of adapter plates to go from the gearbox to the nema b pattern.
Specifically for bmw zf gearboxes. googling but not getting much so far.

philbrennan wrote: ↑Sun Jul 31, 2022 9:32 am This is very cool. I'm wondering does anyone know a good source of adapter plates to go from the gearbox to the nema b pattern.
Specifically for bmw zf gearboxes. googling but not getting much so far.

Thank you.

if any one has a drawing of a bmw zf gearbox bolt pattern, I can draw up a adapter plate in cad and get it laser cut