Page 1 of 1
Needed: Nissan Leaf BMS cell tap wires
Posted: Sun Feb 06, 2022 9:56 am
by johu
For the Audi A2 project I will be using Nissan Leaf cells and the matching BMS. Does anyone have the tap wires left, possibly including the plastic pole covers? I have the second part of the loom, just the part with the lugs is missing. 24, 30 and 40 kWh wires are identical.
Re: Needed: Nissan Leaf BMS cell tap wires
Posted: Sun Feb 06, 2022 10:44 pm
by ZooKeeper
Why yes I do have the tap wire harness, but the covers have been butchered for a couple other projects. Problem is shipping from USA to DE might take longer and cost more than they are worth.
Re: Needed: Nissan Leaf BMS cell tap wires
Posted: Mon Feb 07, 2022 8:12 am
by johu
ok cool. Covers are not super important. Lets see what else comes up
Re: Needed: Nissan Leaf BMS cell tap wires [SOLD]
Posted: Fri Mar 04, 2022 10:19 am
by johu
Scrap that, I just cut off the "mezzanine" connectors and soldered the wires directly to the copper bus bars