This version of the bootloader works on both 1k and 2k page size devices and on any flash size. The address of the pindef structure is fixed to the 3rd-to last 1k block. That is 0x801F400 on 128k flashes or 0x800F400 on 64k.
Yo do not need to upgrade your boot loader from V4 if you are on a 128k flash size, 1k page size device like the STM32F103RBT6.
https://github.com/jsphuebner/tumanako- ... s/tag/v5.2
Boot loader version 5.2
- johu
- Site Admin
- Posts: 5682
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 153 times
- Been thanked: 960 times
- Contact:
Boot loader version 5.2
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
- EV_Builder
- Posts: 1199
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 16 times
- Been thanked: 33 times
- Contact:
Re: Boot loader version 5.2
Is this a correct one for the VCU? (STM32F107)??
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.
- johu
- Site Admin
- Posts: 5682
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 153 times
- Been thanked: 960 times
- Contact:
Re: Boot loader version 5.2
Yes it is universal
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9