Mercedes-Benz B Electric - motor support

Topics concerning the Tesla front and rear drive unit drop-in board
leman2112
Posts: 172
Joined: Sat Dec 21, 2019 10:30 am
Location: United States
Has thanked: 27 times

Re: Mercedes-Benz B Electric - motor support

Post by leman2112 »

oh probably has to be twice as long of a harness as well to get the clocking right?
leman2112
Posts: 172
Joined: Sat Dec 21, 2019 10:30 am
Location: United States
Has thanked: 27 times

Re: Mercedes-Benz B Electric - motor support

Post by leman2112 »

tom91 wrote: Tue Dec 24, 2019 11:59 am Yes and No.

Both do not fit from factory;

Connector: you need to modify the case a bit, not hard just tedious.
Cable: Current one in stock is too short, as the motor is clocked different it needs to be almost twice as long.
leman2112
Posts: 172
Joined: Sat Dec 21, 2019 10:30 am
Location: United States
Has thanked: 27 times

Re: Mercedes-Benz B Electric - motor support

Post by leman2112 »

I'll just cut the new harness in half when it gets here, one wire at a time, make it twice as long with crimp connectors and the original Mercedes wires, that way there is absolutely no guessing on my part on the pinout order.
leman2112
Posts: 172
Joined: Sat Dec 21, 2019 10:30 am
Location: United States
Has thanked: 27 times

Re: Mercedes-Benz B Electric - motor support

Post by leman2112 »

here it is!
Attachments
16739253757685021778713431295393.jpg
16739253445286844593625303729435.jpg
Post Reply