What can I do with a STM32G431 3ph dev board?

Post Reply
User avatar
joromy
Posts: 371
Joined: Fri Jun 28, 2019 12:56 pm
Has thanked: 1 time
Been thanked: 3 times

What can I do with a STM32G431 3ph dev board?

Post by joromy »

Just got this STM32G431 dev board for BLDC/PMSM.
It has CAN, FOC, current sensing, encoder and even a ST-link debugger/programmer.

But what can I use it for, can I beef it up to drive a IGBT.
Looks very capable, will be fun to play with.
Price $19.15

https://www.digikey.com/en/products/det ... 1/10321670

https://www.st.com/content/ccc/resource ... 564746.pdf
IMG_20210414_181726_2.jpg
Thomas A. Edison “I have not failed. I've just found 10,000 ways that won't work"
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: What can I do with a STM32G431 3ph dev board?

Post by EV_Builder »

You need to check the requirements of your IGBT component. I think you need to connect it to the FET driver but thats stuff i normally need to check my self.

I do have to say i missed this CPU and its very nice!
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
Post Reply