ESP32 port for the Web Interface
Posted: Sat Feb 20, 2021 6:40 am
Hello everyone, hope you're all well!
Having just built my first inverter PCB, I realized I don't have any ESP8266's lying around for that handy web interface, but I do have a lot of ESP32's. So instead of just buying some 8266's, I've ported the code to run on the ESP32...
As far as compatibility goes it should work exactly the same; however I didn't have the time to port over the SWD update functionality yet so I have just omitted it for now, so those buttons on the web interface don't work.
If anyone is interested in checking it out you can find it here: https://github.com/Bedz01/esp32-web-interface-port
Having just built my first inverter PCB, I realized I don't have any ESP8266's lying around for that handy web interface, but I do have a lot of ESP32's. So instead of just buying some 8266's, I've ported the code to run on the ESP32...
As far as compatibility goes it should work exactly the same; however I didn't have the time to port over the SWD update functionality yet so I have just omitted it for now, so those buttons on the web interface don't work.
If anyone is interested in checking it out you can find it here: https://github.com/Bedz01/esp32-web-interface-port