Re: interface problem tesla sdu with esp32 canlite module
Posted: Sun Feb 25, 2024 7:40 pm
I'd like to see a video of this.
Don't know why gdb is launched.
The update screen indicates that the file system (spifs) is missing
openinverter forum
openinverter Community
https://openinverter.org:443/forum/
interface problem tesla sdu with esp32 canlite module
Page 2 of 2
Re: interface problem tesla sdu with esp32 canlite module
Posted: Mon Feb 26, 2024 9:34 am
Re: interface problem tesla sdu with esp32 canlite module
Posted: Mon Feb 26, 2024 9:51 am
Maybe one last try before appying 400V to the ESP ( 
)
I used arduino IDE to flash all the things, this is a little bit complicated, but I found a way. Described here: https://github.com/jsphuebner/esp32-web ... n_notes.md
)I used arduino IDE to flash all the things, this is a little bit complicated, but I found a way. Described here: https://github.com/jsphuebner/esp32-web ... n_notes.md