openinverter forum

openinverter Community
https://openinverter.org/forum/

HOWTO: Flashing ESP8266

https://openinverter.org/forum/viewtopic.php?t=8

Page 5 of 8

Re: HOWTO: Flashing ESP8266

Posted: Tue May 26, 2020 7:32 pm
by BMW2002
Most forums are the same its usually the same dozen people talking in code which is hard for the outsider to get in.

Always reminds me of IKEA , you know what you want, you cant really find it, you just hope you'll bump into a store rep that day to guide you ;)

Re: HOWTO: Flashing ESP8266

Posted: Sat Aug 01, 2020 7:28 am
by jason_arnold
Dima, I'd like to have a go at running your latest variant of the web interface, but the mklittlefs tool your PS script calls is no longer available, so I'm unable to compile my own .bin for the file system - any chance you have one ready to share?

Re: HOWTO: Flashing ESP8266

Posted: Tue Sep 29, 2020 4:29 am
by kaleb
@dima I flashed your most recent update, have a solid green light afterwards and no inverter SSID, something I did wrong?

Re: HOWTO: Flashing ESP8266

Posted: Wed Sep 30, 2020 12:05 am
by kaleb
kaleb wrote: ↑Tue Sep 29, 2020 4:29 am @dima I flashed your most recent update, have a solid green light afterwards and no inverter SSID, something I did wrong?
Disregard. :) Using precompiled .bin didn't work as anticipated, but building with Arduino from the sketch worked.

Re: HOWTO: Flashing ESP8266

Posted: Wed Sep 30, 2020 12:29 am
by kaleb
Maybe I spoke too soon. It worked, but now I get a "not compressed" message. I've tried running the script again and selecting "compress javascript -y" when prompted. Anyone have this happen as well?

Re: HOWTO: Flashing ESP8266

Posted: Wed Sep 30, 2020 3:24 am
by kaleb
SO weird.. It'll work for a short period, let me click around the interface briefly, then restart and 404 all pages but update. I can upload the littlefs once again and it'll do the same, attempt to work then says uncompressed and redirects to update.. Maybe I just have a bad Olimex? Anyone that's been through these things before, would certainly appreciate your input.

Re: HOWTO: Flashing ESP8266

Posted: Tue Oct 06, 2020 4:22 am
by qmedia2651
you can us a Wimos D1 Mini I've been working on a shield for the LDU to use the Wimos instead of the Olimex. I have the gerber files and PCB file for Fritz. It Works waiting for my parts to populate my board. Working on my 1991 Mercedes 300CE EV Conversion with a Tesla LDU. All Nissan Leaf battery pack fits in the front, this car came with a M104 6cyl cast iron engine about 900 lbs. Less than the battery pack.


[img]
Wimos_D1_Mini_Shield_pcb.jpg

Re: HOWTO: Flashing ESP8266

Posted: Tue Oct 06, 2020 6:02 pm
by bexander
kaleb wrote: ↑Wed Sep 30, 2020 12:29 am Maybe I spoke too soon. It worked, but now I get a "not compressed" message. I've tried running the script again and selecting "compress javascript -y" when prompted. Anyone have this happen as well?
To get it to work using Arduino IDE, I had to do first a "normal" upload (Sketch -> Upload) and then sketch data upload (Tools -> ESP8266 Sketch Data Upload).

Re: HOWTO: Flashing ESP8266

Posted: Wed Oct 28, 2020 12:00 am
by vin
Hi all,

I think I've managed to flash to ESP8266 however I'm unable to see it when searching for an SSID, Should the SSID be broadcasting automatically after the flashing process? should I be able to to access the ESP Wifi Web page prior to connecting to the Inverter controller?

Re: HOWTO: Flashing ESP8266

Posted: Wed Oct 28, 2020 7:28 am
by johu
The default SSID is ESP_XXXX (where XXXX is part of the MAC address). If thats not showing something went wrong with the flash process.
No, you can't access anything before connecting :)

Re: HOWTO: Flashing ESP8266

Posted: Wed Oct 28, 2020 2:46 pm
by vin
johu wrote: ↑Wed Oct 28, 2020 7:28 am The default SSID is ESP_XXXX (where XXXX is part of the MAC address). If thats not showing something went wrong with the flash process.
No, you can't access anything before connecting :)
Hi Johannes, Thanks for getting back to me on this, and great work with all of this by the way. Are you saying that, after the upload, if i just apply 3.3v to the MOD-WIFI-ESP8266, I should have a broadcasting ESP_XXXX SSID? Thanks again

Re: HOWTO: Flashing ESP8266

Posted: Thu Oct 29, 2020 3:27 pm
by vin
vin wrote: ↑Wed Oct 28, 2020 2:46 pm
johu wrote: ↑Wed Oct 28, 2020 7:28 am The default SSID is ESP_XXXX (where XXXX is part of the MAC address). If thats not showing something went wrong with the flash process.
No, you can't access anything before connecting :)
Hi Johannes, Thanks for getting back to me on this, and great work with all of this by the way. Are you saying that, after the upload, if i just apply 3.3v to the MOD-WIFI-ESP8266, I should have a broadcasting ESP_XXXX SSID? Thanks again
I've managed to get it working. After flashing the successfully which should look like the log below, GPIO0 MUST be soldered back to 1 in order to see an active SSID to broadcast a WIFI AP.

This is the logs after successful flash from MAC Os


[SPIFFS] data : /Users/ladmin/Documents/Arduino/FSBrowser/data
[SPIFFS] size : 1000
[SPIFFS] page : 256
[SPIFFS] block : 8192
/wifi-updated.html
/gauges.html
/ajax-loader.gif
/index.html
/inverter.js
/remote.html
/chart.min.js.gz
/syncofs.html
/gauge.min.js.gz
/log.js
/index.js
/jquery.core.min.js.gz
/README.md
/chartjs-annotation.min.js.gz
/wifi.html
/log.html
/style.css
/gauges.js
/jquery.knob.min.js.gz
/refresh.png
[SPIFFS] upload : /var/folders/pf/g5203ncd4r17pkc3gm4tzk7r0000gn/T/arduino_build_495601/FSBrowser.spiffs.bin
[SPIFFS] address : 0x100000
[SPIFFS] reset : --before no_reset --after soft_reset
[SPIFFS] port : /dev/cu.usbserial-A50285BI
[SPIFFS] speed : 115200
[SPIFFS] python : /Users/ladmin/Library/Arduino15/packages/esp8266/tools/python3/3.7.2-post1/python3
[SPIFFS] uploader : /Users/ladmin/Library/Arduino15/packages/esp8266/hardware/esp8266/2.6.3/tools/upload.py

esptool.py v2.8
Serial port /dev/cu.usbserial-XXXXXXX
Connecting....
Chip is ESP8266EX
Features: WiFi
Crystal is 26MHz
MAC: xx:xx:xx:xx:xx:xx
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Auto-detected Flash size: 2MB
Compressed 1024000 bytes to 118444...
Wrote 1024000 bytes (118444 compressed) at 0x00100000 in 10.5 seconds (effective 783.4 kbit/s)...
Hash of data verified.

Leaving...
Hard resetting via RTS pin...

Re: HOWTO: Flashing ESP8266

Posted: Fri Oct 30, 2020 1:40 pm
by Bigpie
jnsaff wrote: ↑Mon Mar 16, 2020 9:20 pm I'm having a similar problem as well. I got the ESP8266 from Johannes so it should be fine. Then programmed the bootloader and stm32_sine.hex red led is on and green is blinking on the blue pill.

No parameters are showing but when I try to Display Error Memory I get:

Code: Select all

Unknown command sequence
e��K�
Unknown command sequence
Custom command 'json' gets

Code: Select all

Unknown command sequence
j��)
So it seems that they are communicating as from the forum search this error is something that the stm32_sine sends back. But TX may be messed up somehow? I believe my Blue Pills may be quite dodgy .. so would want to put the black pill on there instead but the pin labels are not exactly the same. Any ideas? Much appreciated!
How did you solve this one? I'm getting it. I've got a Bluepill with STM32-car on there, it responds ok to requests for 'json' using a usb-ttl but when I connect up the Wemos D1 and hit the index.html I get an error. '/cmd?cmd=json' gives

Code: Select all

j��)

Re: HOWTO: Flashing ESP8266

Posted: Sun Nov 01, 2020 6:07 pm
by dima
This tell you wrong TTL speed. Check speed with 'http://192.168.4.1/baud'

Re: HOWTO: Flashing ESP8266

Posted: Sun Nov 01, 2020 8:26 pm
by Bigpie
'http://192.168.4.1/baud' just shows

fastUart off

Bluepill has

Code: Select all

   #define USART_BAUDRATE 115200
   usart_set_baudrate(TERM_USART, USART_BAUDRATE);
and ESP8266

Code: Select all

void setup(void){
  Serial.begin(115200);
  Serial.setTimeout(100);
  SPIFFS.begin();
.
.
.

Re: HOWTO: Flashing ESP8266

Posted: Sun Nov 01, 2020 8:57 pm
by dima
Strange, sounds like inverter has 'fastuart' but ESP does not know about it.

You can always set ESP8266:

Code: Select all

bool fastUartAvailable = false;
And try again, maybe Blue-Pill cannot operate at 921600

Re: HOWTO: Flashing ESP8266

Posted: Mon Nov 02, 2020 8:51 am
by bexander
dima wrote: ↑Sun Nov 01, 2020 8:57 pm And try again, maybe Blue-Pill cannot operate at 921600
I have got a Blue-Pill and Olimex WiFi-module to work together so should not be a limitation in the Blue-Pill or the firmaware.

Re: HOWTO: Flashing ESP8266

Posted: Mon Nov 02, 2020 9:37 am
by Bigpie
Apparently there's a lot of fake chips on these bluepills. https://www.cnx-software.com/2020/03/22 ... m32-fakes/
I think it's safe to say I have a fake.
20201102_093507.jpg

Re: HOWTO: Flashing ESP8266

Posted: Wed Nov 11, 2020 8:22 pm
by vin
vin wrote: ↑Wed Oct 28, 2020 12:00 am Hi all,

I think I've managed to flash to ESP8266 however I'm unable to see it when searching for an SSID, Should the SSID be broadcasting automatically after the flashing process? should I be able to to access the ESP Wifi Web page prior to connecting to the Inverter controller?
i've managed to flash the module, re solder GPIO0 and it all works. :)

Re: HOWTO: Flashing ESP8266

Posted: Sun Dec 06, 2020 10:37 pm
by Peakon28
Hi All
I am trying to flush ESP8266 but getting error when I am trying to compile Arduino code.
Arduino: 1.8.13 (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Disabled, All SSL ciphers (most compatible), 4M (2M SPIFFS), v2 Lower Memory, Disabled, None, Only Sketch, 921600"


In file included from C:\FSBrowser\FSBrowser.ino:69:0:

sketch\src/arm_debug.h:130:49: error: 'StreamString' has not been declared

void hexDump(uint32_t addr, unsigned count, StreamString &data);

^

C:\FSBrowser\FSBrowser.ino: In lambda function:

FSBrowser:624:46: error: no matching function for call to 'ARMDebug::hexDump(uint32_t&, uint32_t&, StreamString&)'

swd.hexDump(addrNext, addrCount, data);

^

C:\FSBrowser\FSBrowser.ino:624:46: note: candidate is:

In file included from C:\FSBrowser\FSBrowser.ino:69:0:

sketch\src/arm_debug.h:130:10: note: void ARMDebug::hexDump(uint32_t, unsigned int, int&)

void hexDump(uint32_t addr, unsigned count, StreamString &data);

^

sketch\src/arm_debug.h:130:10: note: no known conversion for argument 3 from 'StreamString' to 'int&'

exit status 1

no matching function for call to 'ARMDebug::hexDump(uint32_t&, uint32_t&, StreamString&)'

Re: HOWTO: Flashing ESP8266

Posted: Mon Dec 07, 2020 5:28 pm
by dima
This is new revision with SWD mod

"src" folder must be inside C:\FSBrowser\

"sketch"? Do you have other .ino files open? Only "FSBrowser.ino" should be open, close others.

Re: HOWTO: Flashing ESP8266

Posted: Mon Dec 07, 2020 8:47 pm
by Peakon28
Yes I have src folder inside FSBrowser, actually tried both- inside FSBrowser and in Data folder

Image

Image

Image

Re: HOWTO: Flashing ESP8266

Posted: Mon Dec 07, 2020 10:34 pm
by Peakon28
I have updated esp8266 board package up to version 2.7.4 and sketch compiled correctly and I managed to upload sketch to Olimex board and program SPIFFS.

Image

next test it on the board

Re: HOWTO: Flashing ESP8266

Posted: Tue Dec 08, 2020 8:02 pm
by TheSilverBuick
Hmm, nice! I've been struggling with a python error of some kind. Been trying to trouble shoot it myself for the last two or so weeks, but have not gotten anywhere. Maybe tonight I'll post up the error. It acts like it cannot find the COM, but its set right and the green data communication light on the Olimex chip lights up when its attempting the flash.

Re: HOWTO: Flashing ESP8266

Posted: Tue Dec 08, 2020 9:49 pm
by Peakon28
Post your error if it is similar to what I have experienced I will let you know how I solved it.
All times are UTC
Page 5 of 8

Powered by phpBB® Forum Software © phpBB Limited