Simple Zombie Mounting Bracket
-
Jack Bauer
- Posts: 3999
- Joined: Wed Dec 12, 2018 5:24 pm
- Location: Ireland
- Has thanked: 153 times
- Been thanked: 1114 times
- Contact:
Simple Zombie Mounting Bracket
Simple 3d printable mounting bracket for Zombieverter VCU. Threaded holes are 6mm and will need to be cleaned up with a tap after print. I used PETG at 25% infill.
- Attachments
-
-
- Zombie_mount.zip
- (1.86 MiB) Downloaded 3 times
-
I'm going to need a hacksaw