MQB & MLB Can log Request - For Zombieverter Comm Additions

[Mitchy]

Hey All.

Wondering if anyone has any sources for a MQB and MLB canlogs.
I have the DBC files already, but just looking for some examples to work with to write a Zombieverter CAN plugin for MQB and MLB models.
Lots of shared addresses between these two, as well as the Porsche 9x1/Macan. I've got the 9x1 codebase pretty much ported over as a start.

Overall there'll likely be a unified 2010 VAG selection, with switches to choose the MQB/MLB/9x1 implementations.

I don't intend the code to be elegant, but it'll be a good basis for refinement for the community to work on.

[RetroZero]

Will be a while, but I'm waiting to see what Damien hacks up with his CAN data logger and getting one asap.

[RetroZero]

Got savvycan running with wifican @uhi22. Crocodile clip arrived. I'll see if it can be used for CAN logs. I tried it on a bench setup cluster and the data seems identical to the hardwire setup with wifican.
Edit - my crocodile clip is not yet operational. The data I'm seeing is from the hard wire setup.
Edit - 2, Got another Canadapter board on its way to connect independently to my bench setup and see what the crocodile says

[RetroZero]

Trying in another thread.... Capturing CAN data sent with VCDS and then playing it back (blinking LED on charger flap), I can't get the LED to blink. Are the magic bytes required when playing back CAN data? I tried it with the lock actuator too.....

[Jacobsmess]

Hi Mitchy, did you get any Canlogs from an MQB vehicle? thanks

[uhi22]

Is it clear which of the CAN busses is of most interest? AFAIR there are multiple, like engine CAN, body CAN.
And do we know where contact them?

[Jacobsmess]

Is it clear which of the CAN busses is of most interest?

For myself I suspect only the powertrain can is required but I have revived an old thread from 2023, not sure if Mitchy answered his question or not.