Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Discussion about components from Ampera/Bolt and the PSA group which owns Opel these days
Post Reply
TheLifeHacker
Posts: 4
Joined: Thu Mar 28, 2019 3:55 am
Location: Los Angeles USA

Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by TheLifeHacker »

I am building an EV with the above items and using them in conjunction with Chevy Bolt battery pack and Tesla drivetrain. Does anyone have a contact that can make the Bolt components work in this build?
User avatar
Kevin Sharpe
Posts: 1345
Joined: Fri Dec 14, 2018 9:24 pm
Location: Ireland and US
Been thanked: 4 times

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by Kevin Sharpe »

TheLifeHacker wrote: Thu Mar 28, 2019 10:41 amDoes anyone have a contact that can make the Bolt components work in this build?
What's your budget for this development?
This is a personal post and I disclaim all responsibility for any loss or damage which any person may suffer from reliance on the information and material in this post or any opinion, conclusion or recommendation in the information and material.
arber333
Posts: 3241
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 74 times
Been thanked: 223 times
Contact:

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by arber333 »

TheLifeHacker wrote: Thu Mar 28, 2019 10:41 am I am building an EV with the above items and using them in conjunction with Chevy Bolt battery pack and Tesla drivetrain. Does anyone have a contact that can make the Bolt components work in this build?
See if you can use CAN MSG from Volt components?
https://leafdriveblog.wordpress.com/201 ... dc-or-apu/
https://leafdriveblog.wordpress.com/201 ... a-charger/
https://leafdriveblog.wordpress.com/201 ... ic-heater/
https://leafdriveblog.wordpress.com/201 ... -and-fans/
Paerel
Posts: 3
Joined: Mon Feb 24, 2020 11:01 pm
Location: Miami, FL, USA

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by Paerel »

Hi, I’m doing EV convention based on Tesla big drive unit and Chevy Bolt batteries. I have in my shop complete car Chevy bolt (damaged a little but I can make it run) if you need any support - let me know ;)))
I can scan and record can-bus signals or what ever you may need ;)

Also I have Chevy bolt wiring diagram
User avatar
Boxster EV
Posts: 434
Joined: Fri Jul 26, 2019 9:32 pm
Location: UK
Has thanked: 35 times
Been thanked: 26 times

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by Boxster EV »

Speak to tom91 (Tom De bree). He can provide you with a virtually out of the box, cost effective solution for the Chevy kit.
Porsche 986 powered by a Tesla large drive unit. Backwards. Build documented here and Instagram @tesla_porsche here.
slow67
Posts: 151
Joined: Thu Jan 30, 2020 6:52 pm
Location: Texas
Been thanked: 1 time

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by slow67 »

Boxster EV wrote: Thu Feb 27, 2020 2:03 pm Speak to tom91 (Tom De bree). He can provide you with a virtually out of the box, cost effective solution for the Chevy kit.
He has done the Chevy Volt, not Bolt.
Although it is worth checking if they reused the same CAN commands.
tom91
Posts: 1273
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 201 times

Re: Reverse-engineering Chevy Bolt BMS/ Charger/ DC-DC 14v

Post by tom91 »

I believe with the Bolt and Volt gen 2 they went a step back, alot of the controls are pwm/analogue signals so you require a working vehicle to reverse engineer.

If anyone is based in the UK I could potential help out, at some form of compensation.
Founder Volt Influx https://www.voltinflux.com/
Post Reply