EM57 ZE1 motor, last connector pinout question

Nissan Leaf/e-NV200 drive stack topics
Post Reply
User avatar
mnmn
Posts: 26
Joined: Mon Apr 17, 2023 6:30 pm
Location: Budapest, Hungary
Has thanked: 17 times
Been thanked: 3 times

EM57 ZE1 motor, last connector pinout question

Post by mnmn »

Hello, I have a ZE1 Leaf stack, with complete wiring (fortunately).
The connector at the end of the signal wires looks like this:
image.png
Can you please help me showing the pinout of this connector?
And where can I buy a mating connector to it?

Thank you in advance
EV-FAN
ginetto
Posts: 13
Joined: Tue Apr 07, 2020 7:29 am
Has thanked: 8 times
Been thanked: 3 times

Re: EM57 ZE1 motor, last connector pinout question

Post by ginetto »

I found harness and wiring diagram fo ZE1

PM with your email to sent it or better allow admin to attach a larger file (20MB)
mnmn wrote: Mon Jun 05, 2023 10:39 am Hello, I have a ZE1 Leaf stack, with complete wiring (fortunately).
The connector at the end of the signal wires looks like this:
image.png

Can you please help me showing the pinout of this connector?
And where can I buy a mating connector to it?

Thank you in advance
User avatar
mnmn
Posts: 26
Joined: Mon Apr 17, 2023 6:30 pm
Location: Budapest, Hungary
Has thanked: 17 times
Been thanked: 3 times

Re: EM57 ZE1 motor, last connector pinout question

Post by mnmn »

You are great, thank you!

I have just sent you a PM.
EV-FAN
Adamzki
Posts: 1
Joined: Tue Jun 13, 2023 1:25 pm
Has thanked: 1 time

Re: EM57 ZE1 motor, last connector pinout question

Post by Adamzki »

ginetto wrote: Mon Jun 05, 2023 10:50 am I found harness and wiring diagram fo ZE1

PM with your email to sent it or better allow admin to attach a larger file (20MB)
Hi ginetto. Please could you PM me the diagram too.
ginetto
Posts: 13
Joined: Tue Apr 07, 2020 7:29 am
Has thanked: 8 times
Been thanked: 3 times

Re: EM57 ZE1 motor, last connector pinout question

Post by ginetto »

Adamzki wrote: Tue Jun 13, 2023 1:33 pm Hi ginetto. Please could you PM me the diagram too.
is there a way to store this pdf in the openinverter space?
I can't attach here due to size
Lesterliston
Posts: 1
Joined: Sun Oct 22, 2023 5:30 am

Re: EM57 ZE1 motor, last connector pinout question

Post by Lesterliston »

Hello Ginetto and Adamzki, is it possible to forward the connector pinout. It is really hard to go forward on my project because of this new connector. and send it to lesterliston at yahoo.com or ɯoɔ˙ooɥɐʎ@uoʇsᴉlɹǝʇsǝl

Thanks you so much! :)
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: EM57 ZE1 motor, last connector pinout question

Post by johu »

ginetto wrote: Tue Jun 13, 2023 3:42 pm is there a way to store this pdf in the openinverter space?
I can't attach here due to size
just saw this. How large is the file?
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
ginetto
Posts: 13
Joined: Tue Apr 07, 2020 7:29 am
Has thanked: 8 times
Been thanked: 3 times

Re: EM57 ZE1 motor, last connector pinout question

Post by ginetto »

johu wrote: Sun Oct 22, 2023 5:20 pm just saw this. How large is the file?
20.5MB
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: EM57 ZE1 motor, last connector pinout question

Post by johu »

Attachment limit raised, try uploading now
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
ginetto
Posts: 13
Joined: Tue Apr 07, 2020 7:29 am
Has thanked: 8 times
Been thanked: 3 times

Re: EM57 ZE1 motor, last connector pinout question

Post by ginetto »

johu wrote: Mon Oct 23, 2023 8:04 am Attachment limit raised, try uploading now
here attached you have the ZE1 Network Diagram document where available all harnesses and network
Attachments
20121_nissan_leaf_Network_diagram.pdf
Nissan Leaf ZE1 Network and Harness Diagram
(19.57 MiB) Downloaded 85 times
jrbe
Posts: 265
Joined: Mon Jul 03, 2023 3:17 pm
Location: CT, central shoreline, USA
Has thanked: 92 times
Been thanked: 65 times

Re: EM57 ZE1 motor, last connector pinout question

Post by jrbe »

johu wrote: Mon Oct 23, 2023 8:04 am Attachment limit raised, try uploading now
I tried adding this to the wiki but it wouldn't allow it. Said file name was not allowed. It's 2021_nissan_leaf_Network_diagram.pdf
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: EM57 ZE1 motor, last connector pinout question

Post by johu »

I'll check, maybe I need to enable pdf
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply