Gain for uaux  [SOLVED]

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
Riwi
Posts: 43
Joined: Wed Jun 12, 2019 5:50 pm
Has thanked: 1 time
Been thanked: 8 times

Gain for uaux

Post by Riwi »

Hi!

just got my sdu up and running for test. Using a 12v battery for logic and 24v dc for “hv”.

Looking at the gains and I see uaux is 16,48 in the spot values. The multimeter reads 11,45. How do I set the gain for uaux?

I managed to “unhide” udcgain and set the correctly but I can’t find the gain for the 12v aux.

Thanks!
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: Gain for uaux

Post by johu »

uaux isn't implemented on Tesla boards, the input is pulled to 3.3V
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Riwi
Posts: 43
Joined: Wed Jun 12, 2019 5:50 pm
Has thanked: 1 time
Been thanked: 8 times

Re: Gain for uaux  [SOLVED]

Post by Riwi »

Ok, so it’s safe to ignore?
Post Reply