I-miev battery pack and Prius-Gen3-Inverter-master

Mitsubishi hybrid drive unit hacking
Post Reply
User avatar
youngpoland
Posts: 26
Joined: Sun Feb 05, 2023 10:04 am
Has thanked: 14 times

I-miev battery pack and Prius-Gen3-Inverter-master

Post by youngpoland »

I have a question, I have already ordered and programmed the Prius-Gen3-Inverter-master,
IMG_0807.JPG
I want to connect it to the outlander's rear engine,
IMG_0810[1].jpg
I also bought batteries from the i-miev.
IMG_0812[1].jpg
My question regarding connecting these batteries does the cat have a ready solution to connect the original bms from these batteries into the whole system to connect the charger from the outlander?
IMG_0771.JPG
Has anyone already tried to do something like this?
User avatar
midway
Posts: 78
Joined: Mon Feb 15, 2021 3:52 pm
Location: Ural
Has thanked: 5 times
Been thanked: 8 times

Re: I-miev battery pack and Prius-Gen3-Inverter-master

Post by midway »

User avatar
youngpoland
Posts: 26
Joined: Sun Feb 05, 2023 10:04 am
Has thanked: 14 times

Re: I-miev battery pack and Prius-Gen3-Inverter-master

Post by youngpoland »

Yes I saw it but there is bms from outlander and I have i-miev and there are big differences when reading data and that's why I'm looking for a solution for i-miev
0tik
Posts: 30
Joined: Tue Jan 04, 2022 11:55 pm
Has thanked: 8 times
Been thanked: 3 times

Re: I-miev battery pack and Prius-Gen3-Inverter-master

Post by 0tik »

I searched for quite a bit and for the life of me can't find imiev CMU pin labels. As in which pins to tap to for CAN and power supply. Can you guys post them here? Are they the same as in Tom-evnut/OutlanderPHEVBMS? Asking before checking because i don't want to fry anything. According to evmonitor they're the same as outlander. Is pin 1 red? Image
Attachments
photo_2024-02-01_20-27-35.jpg
tom91
Posts: 1274
Joined: Fri Mar 01, 2019 9:15 pm
Location: Bristol
Has thanked: 97 times
Been thanked: 204 times

Re: I-miev battery pack and Prius-Gen3-Inverter-master

Post by tom91 »

Measure it to check. should be easy to spot an input CAP or diode and the CAN transceiver.

I do believe they are the same from memory. The CAN from the modules is different then from the Outlander ones.
Founder Volt Influx https://www.voltinflux.com/
Post Reply