Hi guys
I have the gigavac gv242mab contractors and resistors.
What do the red, black, white and blue wires do?
Does anyone have a precharge and HV circuit we can follow?
Thanks
Precharge and HV circuit
-
- Posts: 3241
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 74 times
- Been thanked: 223 times
- Contact:
Re: Precharge and HV circuit
There it is explained....
https://www.evcreate.nl/shop/charging/g ... contactor/
Both wires leed to coils. One pair is for hard turnon and the other pair is for holding.
- Bigpie
- Posts: 1585
- Joined: Wed Apr 10, 2019 8:11 pm
- Location: South Yorkshire, UK
- Has thanked: 74 times
- Been thanked: 299 times
Re: Precharge and HV circuit
Isn't one pair the low voltage auxiliary contacts?
"This is a new old stock Gigavac GV242MAB side mount contactor with normally open auxiliary contacts. It has a rating of 400+ A and max. rated voltage of 800VDC."
"This is a new old stock Gigavac GV242MAB side mount contactor with normally open auxiliary contacts. It has a rating of 400+ A and max. rated voltage of 800VDC."
VW Beetle 2003
Outlander front generator
Prius Gen 3 inverter (EVBMW logic board)
Outlander charger
3x Golf GTE batteries
Chademo Charging
Outlander water heater
Outlander front generator
Prius Gen 3 inverter (EVBMW logic board)
Outlander charger
3x Golf GTE batteries
Chademo Charging
Outlander water heater
-
- Posts: 3241
- Joined: Mon Dec 24, 2018 1:37 pm
- Location: Slovenia
- Has thanked: 74 times
- Been thanked: 223 times
- Contact:
Re: Precharge and HV circuit
Well in any case i suggest you check them with a light bulb in circuit.