olimex GD32-H103  [SOLVED]

Post Reply
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

olimex GD32-H103  [SOLVED]

Post by chentron »

olimex discontinued or have no stock for the olimex STM32-h103 that is included in the old v2 johannes kit.
They only sell GD32-h103.
Because a problem with my STM32-h103 (that is other history) I bought a GD32-h103 but I can not flash because STM32cube software doesnt recognise the chip. Same with zflash app in android.
I have the original usb cable from the v2 kit, and a stlink-v2
So my question is if i have other way to flash the GD32-h103, and if this could do same function in the v2 inverter from johannes.
thanks
Pete9008
Posts: 1801
Joined: Sun Apr 03, 2022 1:57 pm
Has thanked: 102 times
Been thanked: 347 times

Re: olimex GD32-H103

Post by Pete9008 »

Depends how comfortable you are with command line tools, OpenOCD could probably do it?
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

Re: olimex GD32-H103

Post by chentron »

command line tools is not a big problem as the 220 pages of openocd users manual.
i choose to buy a new stm chip and change into the new board and also avoid compatibilty issues with the code
User avatar
EV_Builder
Posts: 1199
Joined: Tue Apr 28, 2020 3:50 pm
Location: The Netherlands
Has thanked: 16 times
Been thanked: 33 times
Contact:

Re: olimex GD32-H103

Post by EV_Builder »

the ST-Link application, old style, works too in windows.
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
chentron
Posts: 103
Joined: Mon Feb 22, 2021 3:25 pm
Location: Spain
Has thanked: 41 times
Been thanked: 4 times

Re: olimex GD32-H103

Post by chentron »

this was a old thread... I did not got program the GD32-H103 because STlink app is not compatible, so i finally got stock for STM32-chip, unmount the GD32 chip and mount the STM32 and surprise it works.
User avatar
johu
Site Admin
Posts: 5683
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: olimex GD32-H103

Post by johu »

Also the STM32-H103 is back in stock
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply