Hi there,
Working to electrified a Grullon GT8 kit. This kit was originally design around the LS engine platform in a mid engine configuration For this build I'm using a wrecked Tesla Model S as a donor. I already purchased the drop in SDU inverter boards, so I'll asking a lot of questions as soon as I get those boards.
AWD Tesla Powered Grullon DDR GT8 (Newbe)
-
- Posts: 33
- Joined: Mon Sep 20, 2021 8:09 pm
- Has thanked: 3 times
- Been thanked: 4 times
- johu
- Site Admin
- Posts: 5769
- Joined: Thu Nov 08, 2018 10:52 pm
- Location: Kassel/Germany
- Has thanked: 157 times
- Been thanked: 1010 times
- Contact:
Re: AWD Tesla Powered Grullon DDR GT8 (Newbe)
Very nice!
Also read here https://openinverter.org/wiki/Tesla_Mod ... %22SDU%22) for the most common SDU info
Also read here https://openinverter.org/wiki/Tesla_Mod ... %22SDU%22) for the most common SDU info
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
-
- Posts: 33
- Joined: Mon Sep 20, 2021 8:09 pm
- Has thanked: 3 times
- Been thanked: 4 times
Re: AWD Tesla Powered Grullon DDR GT8 (Newbe)
Johu,
went thru that already a lot of info there, me being me, always expecting the un-expected
went thru that already a lot of info there, me being me, always expecting the un-expected
- EV_Builder
- Posts: 1199
- Joined: Tue Apr 28, 2020 3:50 pm
- Location: The Netherlands
- Has thanked: 16 times
- Been thanked: 33 times
- Contact:
Re: AWD Tesla Powered Grullon DDR GT8 (Newbe)
@johu; reminds me how important a known quirks section is. Like don't update sw while HV is connected.
Converting an Porsche Panamera
see http://www.wdrautomatisering.nl for bespoke BMS modules.
see http://www.wdrautomatisering.nl for bespoke BMS modules.