Trading gen3 prius plug adapters holder for tuning help

Buy and sell
Post Reply
eprotiva
Posts: 13
Joined: Mon Dec 27, 2021 10:27 pm
Has thanked: 2 times

Trading gen3 prius plug adapters holder for tuning help

Post by eprotiva »

Need HELP ASAP!!
Trading these adapter plates for help tuning gen3 with em61 motor. Made from Polymaker ASA, high temp and outdoor rated, 40% infill and 4 walls, went through 9 revisions to get it just right as its a very close fit. Comes with stainless screws.
text 417-256-1989 or search Eli Protiva on facebook messenger.
IMG_1304.jpg
IMG_1309.jpg
User avatar
johu
Site Admin
Posts: 5681
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 959 times
Contact:

Re: Trading gen3 prius plug adapters holder for tuning help

Post by johu »

It's not free if you expect something in return - title changed.
Please don't scream for trying to get on an expedited lane but aim for paid support if it's urgent
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
eprotiva
Posts: 13
Joined: Mon Dec 27, 2021 10:27 pm
Has thanked: 2 times

Re: Trading gen3 prius plug adapters holder for tuning help

Post by eprotiva »

Is this normal em61 resolver ohms?
D9F63568-BD8C-4B45-B310-74093D09C0DB.jpeg
E24BCA38-755E-4DA8-8003-53E6E154F828.jpeg
E41AC476-EBDD-4D1D-A942-FAF6B6C00EBB.jpeg
eprotiva
Posts: 13
Joined: Mon Dec 27, 2021 10:27 pm
Has thanked: 2 times

Re: Trading gen3 prius plug adapters holder for tuning help

Post by eprotiva »

I think I burned out my resolver excite. Getting nothing on amp seal pin 21 and 22
E702F114-1195-4B00-8AD4-211DDD5E405B.jpeg
A195897C-38A2-4994-B26B-6D4A9B229AD8.jpeg
FFADEF0C-EDCF-469D-8EC1-CE225432029E.jpeg
EEA5DA23-D9A4-406B-845A-899898F5A5C3.jpeg
eprotiva
Posts: 13
Joined: Mon Dec 27, 2021 10:27 pm
Has thanked: 2 times

Re: Trading gen3 prius plug adapters holder for tuning help

Post by eprotiva »

Update: got confused because idc ribbon cable and ampseal pinout are same half the time, well with resolver its all mixed up. Must be on the ampseal pinout. Also could not find this online anywhere, the open inverter excitation frequency is 4.4khz and the voltage is 3.2 volts AC no load (without anything hooked up), with the em61 motor resolver hooked up i back probed at the motor and got 4v ac. Em61 resolvedr excite winding is 17ohms. See attached photos
78AC202A-5D0A-4F69-90A2-6252F848D484.jpeg
51E11250-4F40-4C32-B914-60AB04261852.jpeg
2C6490EA-7DC8-4176-86D5-83FFD85EC096.jpeg
User avatar
johu
Site Admin
Posts: 5681
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 959 times
Contact:

Re: Trading gen3 prius plug adapters holder for tuning help

Post by johu »

Looking good so far
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply