CHAdeMO Canbus decode DC Fast Charging

Development and discussion of fast charging systems eg Chademo , CCS etc
Post Reply
golfdubcrazy
Posts: 75
Joined: Thu Jan 28, 2021 6:15 pm
Has thanked: 1 time
Been thanked: 5 times

CHAdeMO Canbus decode DC Fast Charging

Post by golfdubcrazy »

Hi,

I have come across this decode data from what is exchanged between vehicle and EVSE im sure its probably on the forum somewhere but i thought i would add it again just incase.

Hope this helps :D
image.png
image.png
image.png
image.png
Table F.3 – The physical/data link layer specifications for system A

Communication protocol ISO 11898-1 and ISO 11898-2 The extension bit (12 − 29 bit) is not used.
Transmission rate (kbps) 500
Cycle 100 ms ± 10 %
User avatar
johu
Site Admin
Posts: 5684
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: CCS Canbus decode DC Fast Charging

Post by johu »

Looks much like CHAdeMO to me ;)
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
User avatar
uhi22
Posts: 554
Joined: Mon Mar 14, 2022 3:20 pm
Location: Ingolstadt/Germany
Has thanked: 83 times
Been thanked: 392 times

Re: CCS Canbus decode DC Fast Charging

Post by uhi22 »

Yes, this is CAN bus (Chademo uses CAN), not CCS (which uses powerline/homeplug). Regarding the real CCS, I collected some references in github.com/uhi22/pyPlc.
I would vote to change "CCS" to "Chademo" in the headline.
Post Reply