LDU parameters showing reverse when in forward

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
User avatar
Roadstercycle
Posts: 118
Joined: Mon Sep 23, 2019 10:28 pm
Location: California
Has thanked: 3 times
Been thanked: 2 times
Contact:

LDU parameters showing reverse when in forward

Post by Roadstercycle »

Trying to make sense of what's happening here. When motor going forward it shows reverse on parameters page on laptop. When in reverse it shows forward. Even trying to use the button swapped setting on perimeters page it shows the same thing. Should I just ignore it or is there a reason or a fix? I do refresh the page after each change to let the new input show up. I'm using 5.20 firmware.
jon volk
Posts: 572
Joined: Wed Apr 10, 2019 7:47 pm
Location: Connecticut
Been thanked: 2 times

Re: LDU parameters showing reverse when in forward

Post by jon volk »

I'd just ignore it. Mine has always been swapped.
Formerly 92 E30 BMW Cabrio with Tesla power
User avatar
Boxster EV
Posts: 434
Joined: Fri Jul 26, 2019 9:32 pm
Location: UK
Has thanked: 35 times
Been thanked: 26 times

Re: LDU parameters showing reverse when in forward

Post by Boxster EV »

Roadstercycle wrote: Thu Nov 24, 2022 7:29 pm Trying to make sense of what's happening here. When motor going forward it shows reverse on parameters page on laptop. When in reverse it shows forward. Even trying to use the button swapped setting on perimeters page it shows the same thing. Should I just ignore it or is there a reason or a fix? I do refresh the page after each change to let the new input show up. I'm using 5.20 firmware.
How have you found the new firmware?
Porsche 986 powered by a Tesla large drive unit. Backwards. Build documented here and Instagram @tesla_porsche here.
User avatar
Roadstercycle
Posts: 118
Joined: Mon Sep 23, 2019 10:28 pm
Location: California
Has thanked: 3 times
Been thanked: 2 times
Contact:

Re: LDU parameters showing reverse when in forward

Post by Roadstercycle »

5.20 firmware here. https://github.com/jsphuebner/stm32-sin ... /v5.20.R-2
User avatar
catphish
Posts: 954
Joined: Fri Oct 08, 2021 11:02 pm
Location: Dorset, UK
Has thanked: 93 times
Been thanked: 179 times

Re: LDU parameters showing reverse when in forward

Post by catphish »

The SDU has always run backwards, so I guess the LDU is the same. Forward and reverse function exactly the same, so just ignore it.
Post Reply