How to find out the error

Discussion about various user interfaces such as web interface, displays and apps
Post Reply
User avatar
Renegate2020
Posts: 50
Joined: Tue Dec 01, 2020 6:20 am
Location: Odessa UA
Has thanked: 1 time
Contact:

How to find out the error

Post by Renegate2020 »

Today, at the start, my bus refused to go. I looked at the web page - there is an error [8943] DESAT - STOP.
I want to understand what this error is and where there is a wiki on possible errors.
yaroslav
Posts: 176
Joined: Tue Aug 13, 2019 4:32 pm
Location: Russia, Stavropol
Has thanked: 14 times
Been thanked: 5 times

Re: How to find out the error

Post by yaroslav »

Привет. This error occurs when the phase current is overloaded, or the signal level on the PB12 pin has changed from high to low or vice versa, depending on which controller you are using
User avatar
Renegate2020
Posts: 50
Joined: Tue Dec 01, 2020 6:20 am
Location: Odessa UA
Has thanked: 1 time
Contact:

Re: How to find out the error

Post by Renegate2020 »

thank you
User avatar
Renegate2020
Posts: 50
Joined: Tue Dec 01, 2020 6:20 am
Location: Odessa UA
Has thanked: 1 time
Contact:

Re: How to find out the error

Post by Renegate2020 »

Interested in the meaning of error 12164?
Maybe there is a section with decoding of error numbers?
User avatar
johu
Site Admin
Posts: 5682
Joined: Thu Nov 08, 2018 10:52 pm
Location: Kassel/Germany
Has thanked: 153 times
Been thanked: 960 times
Contact:

Re: How to find out the error

Post by johu »

12164 is the time when it occurred (multiply by x10 to arrive at ms after start).
Error list: https://openinverter.org/wiki/Errors
Support R/D and forum on Patreon: https://patreon.com/openinverter - Subscribe on odysee: https://odysee.com/@openinverter:9
Post Reply