Wanted ISA Ivt-s shunt UK

Buy and sell
Post Reply
User avatar
Ev8
Posts: 801
Joined: Sat Jan 30, 2021 11:05 am
Has thanked: 41 times
Been thanked: 149 times

Wanted ISA Ivt-s shunt UK

Post by Ev8 »

As title really can’t find one anywhere
User avatar
Zapatero
Posts: 443
Joined: Fri Oct 25, 2019 11:08 am
Location: Germany, Ulm
Has thanked: 25 times
Been thanked: 39 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by Zapatero »

i've got one here in Germany - i can send it to the UK of course!
User avatar
Ev8
Posts: 801
Joined: Sat Jan 30, 2021 11:05 am
Has thanked: 41 times
Been thanked: 149 times

Re: Wanted ISA Ivt-s shunt UK

Post by Ev8 »

Please send me a message with the price
Jonr
Posts: 47
Joined: Fri Feb 11, 2022 1:28 pm
Location: Surrey, England
Has thanked: 1 time
Been thanked: 6 times

Re: Wanted ISA Ivt-s shunt UK

Post by Jonr »

I'm in the market for an ISA shunt - does anyone have one available or can suggest the best place to find one?
Project : GS450h into BMW 3 Series Touring?
arber333
Posts: 3241
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 74 times
Been thanked: 223 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by arber333 »

Jonr wrote: Fri Sep 30, 2022 6:40 am I'm in the market for an ISA shunt - does anyone have one available or can suggest the best place to find one?
I have one shunt only from Jaguar. It is a 500A version without voltage sensing. I am offering it for 80€ + shipping?
I guess it would need to be reprogrammed too. See here:
viewtopic.php?t=1282
User avatar
aot93
Posts: 198
Joined: Mon Feb 15, 2021 5:45 pm
Location: UK, West Sussex
Has thanked: 6 times
Been thanked: 43 times

Re: Wanted ISA Ivt-s shunt UK

Post by aot93 »

I contacted the UK distributor for these.
They came back with £288.10ea plus vat for 10.
In stock at manufacturers.

So probably the same as getting from existing EU suppliers.
User avatar
4markowen
Posts: 42
Joined: Mon Apr 20, 2020 9:12 am
Location: Nottingham, UK
Has thanked: 21 times
Been thanked: 1 time

Re: Wanted ISA Ivt-s shunt UK

Post by 4markowen »

https://www.testco-inc.com/search/manuf ... /mId:20907

if the £ pound hadn't tanked against the $ these would be reasonably similar in price including shipping, etc.

Seems getting one at the moment is around £300.
Jonr
Posts: 47
Joined: Fri Feb 11, 2022 1:28 pm
Location: Surrey, England
Has thanked: 1 time
Been thanked: 6 times

Re: Wanted ISA Ivt-s shunt UK

Post by Jonr »

Today, I took delivery of a power pack from a BMW 530e which apparently includes a shunt..... could the ZombieVerter be enhanced to support this shunt in addition to the ISA, assumng they are both controlled CAN messages?
Project : GS450h into BMW 3 Series Touring?
Jonr
Posts: 47
Joined: Fri Feb 11, 2022 1:28 pm
Location: Surrey, England
Has thanked: 1 time
Been thanked: 6 times

Re: Wanted ISA Ivt-s shunt UK

Post by Jonr »

Jonr wrote: Fri Sep 30, 2022 10:12 pm Today, I took delivery of a power pack from a BMW 530e which apparently includes a shunt..... could the ZombieVerter be enhanced to support this shunt in addition to the ISA, assumng they are both controlled CAN messages?

EDIT:
I've just realised there is the mapping function on the ZombieVerter
https://openinverter.org/wiki/File:Spot_values.png
Has anyone used this to be able to use the BWM shunt in place of the ISA shunt?
If so, how?
Project : GS450h into BMW 3 Series Touring?
arber333
Posts: 3241
Joined: Mon Dec 24, 2018 1:37 pm
Location: Slovenia
Has thanked: 74 times
Been thanked: 223 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by arber333 »

There is also LEM CAB500 current sensor on can bus. They can be found in Outlander packs...
User avatar
Ev8
Posts: 801
Joined: Sat Jan 30, 2021 11:05 am
Has thanked: 41 times
Been thanked: 149 times

Re: Wanted ISA Ivt-s shunt UK

Post by Ev8 »

Ok I now have what I needed thanks
User avatar
larsrengersen
Posts: 101
Joined: Tue May 28, 2019 9:42 am
Has thanked: 8 times
Been thanked: 22 times

Re: Wanted ISA Ivt-s shunt UK

Post by larsrengersen »

Jonr wrote: Fri Sep 30, 2022 10:12 pm Today, I took delivery of a power pack from a BMW 530e which apparently includes a shunt..... could the ZombieVerter be enhanced to support this shunt in addition to the ISA, assumng they are both controlled CAN messages?
The beauty / advantage of the IVT is that some models (including the one used with the Zombiverter) that can measure both voltage and current. I have the 1000A in stock.
For current only you can use cheaper sensors like this current only IVT or the CAB by LEM or others perhaps.
But then the question is: how to measure voltage and get it send on the CAN bus?
Plus of course the firmware change needed in the Zombiverter.
User avatar
asavage
Posts: 328
Joined: Sat May 14, 2022 10:57 pm
Location: Oak Harbor, Washington, USA
Has thanked: 269 times
Been thanked: 103 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by asavage »

4markowen wrote: Fri Sep 30, 2022 9:07 am https://www.testco-inc.com/search/manuf ... /mId:20907

if the £ pound hadn't tanked against the $ these would be reasonably similar in price including shipping, etc.

Seems getting one at the moment is around £300.
IDK, a IVT-S-500-U3-I-CAN1-12/24 is still USD$265, which isn't really a whole lot less than £300 in my view.
image.png
Al Savage
2014 RAV4 EV
NissanDiesel
FFMan
Posts: 309
Joined: Mon Jul 25, 2022 7:59 pm
Location: Bicester, Oxfordshire
Has thanked: 8 times
Been thanked: 45 times

Re: Wanted ISA Ivt-s shunt UK

Post by FFMan »

I'm also looking for a shunt for SOC calculation. I have a V1c board not zombie so will do SOC on arduino based on data I harvest.

> or current only you can use cheaper sensors like this current only IVT or the CAB by LEM or others perhaps.

As i understand it SOC is based upon measure Amp-seconds. I can get voltage from the Outlander charger can bus and I think this is pretty accurate as you might expect it to be so would this currnt only shunt suffice - it's a lot cheaper.
E46 touring
Phev rear motor, OEM inverter cabin heater and charger
BMW 9kwh & 12kwh packs
User avatar
asavage
Posts: 328
Joined: Sat May 14, 2022 10:57 pm
Location: Oak Harbor, Washington, USA
Has thanked: 269 times
Been thanked: 103 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by asavage »

Last week, I just received one from member pablo_mtl, USD$155 including shipping (Canada->USA).

viewtopic.php?t=1338

The one I received has a non-terminated CAN, which is more flexible for implementation (just add 120R to the back of your CAN connector, if you need termination at the shunt).
Al Savage
2014 RAV4 EV
NissanDiesel
User avatar
jcwright45
Posts: 31
Joined: Tue Sep 17, 2019 9:01 am
Location: London
Been thanked: 2 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by jcwright45 »

Anyone still in the market for shunts? I have 2
TonyBM
Posts: 1
Joined: Sat Sep 03, 2022 11:36 am
Has thanked: 3 times

Re: Wanted ISA Ivt-s shunt UK

Post by TonyBM »

have you still got the shunts? hope so🙏
modellfan
Posts: 34
Joined: Tue Jul 12, 2022 11:20 am
Has thanked: 3 times
Been thanked: 5 times

Re: Wanted ISA Ivt-s shunt UK

Post by modellfan »

jcwright45 wrote: Sun Jan 22, 2023 3:35 pm Anyone still in the market for shunts? I have 2
Still available? How much do you want for one?
User avatar
langoo
Posts: 65
Joined: Thu May 09, 2019 6:27 pm
Location: Varberg, Sweden

Re: Wanted ISA Ivt-s shunt UK

Post by langoo »

jcwright45 wrote: Sun Jan 22, 2023 3:35 pm Anyone still in the market for shunts? I have 2
I'm on the hunt, PM me if you have one left.
Robin Hellström
MR Electronics AB
Galileo241
Posts: 2
Joined: Thu Aug 17, 2023 12:36 pm
Has thanked: 1 time

Re: Wanted ISA Ivt-s shunt UK

Post by Galileo241 »

Hey guys, anyone here who has already tested and used their new sensor IVT 3.0?

https://www.isabellenhuetteusa.com/prod ... -0-series/

Does anyone offers the same? Can’t find it on digikey or mouser.
Appreciate your help!
User avatar
jnsaff
Posts: 176
Joined: Fri Oct 18, 2019 7:42 am
Location: Tallinn, Estonia
Has thanked: 2 times
Been thanked: 8 times

Re: Wanted ISA Ivt-s shunt UK

Post by jnsaff »

It looks like they only send evaluation devices out for now.
User avatar
larsrengersen
Posts: 101
Joined: Tue May 28, 2019 9:42 am
Has thanked: 8 times
Been thanked: 22 times

Re: Wanted ISA Ivt-s shunt UK

Post by larsrengersen »

Galileo241 wrote: Thu Aug 17, 2023 6:18 pm Hey guys, anyone here who has already tested and used their new sensor IVT 3.0?
https://www.isabellenhuetteusa.com/prod ... -0-series/
They are at B2 Sample stage.
Not end user configurable yet like the normal IVT and already much more expensive.
I’m awaiting of the final product release and they will inform me once I can order those.
User avatar
asavage
Posts: 328
Joined: Sat May 14, 2022 10:57 pm
Location: Oak Harbor, Washington, USA
Has thanked: 269 times
Been thanked: 103 times
Contact:

Re: Wanted ISA Ivt-s shunt UK

Post by asavage »

This fellow has three of the 300A version, @ £99 ea. and is located in the UK:

https://www.diyelectriccar.com/threads/ivt-s-can-current-sensor-shunt.209220/

I would think the 300A capacity would work OK for situations where one is adding DCFC and using the BMW i3 LIM setup or similar.
Al Savage
2014 RAV4 EV
NissanDiesel
Post Reply