Isabellenhuete IVT-S x 2 in Australia.

Buy and sell
Post Reply
wovenrovings
Posts: 16
Joined: Sun Sep 06, 2020 6:08 am
Location: Bundaberg Australia
Has thanked: 5 times
Been thanked: 3 times

Isabellenhuete IVT-S x 2 in Australia.

Post by wovenrovings »

I have 2 x 1000A (AU$520) shunts for sale. I got some extras when I ordered mine from Isabellenhuete. I couldn't find any suppliers in this region and evcreate.nl was out of stock at the time. Hopefully this will help any other Open inverter users Downunder.
These are the 2 can port versions (no terminating resistor). Will come with all the connectors with 300mm tails.
ivt-s1.jpg
ivt-s2.jpg
ivt-s3.jpg
ivt-s4.jpg
ivt-s5.jpg
Note: on a ISA shunt they are rated at their continuous capacity.
User avatar
DkubusEV
Posts: 81
Joined: Sat Sep 17, 2022 4:22 am
Location: Australia
Has thanked: 130 times
Been thanked: 15 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by DkubusEV »

What state are you in mate, I'm in Adelaide, South Australia. I'm also "joining in on the fun" of the gs450h swap into a rwd car with zombie verter.

Cheers
Mike.
1998 Mercedes R170 SLK gs450h project
2003 Smart-Roadster hillclimb EV (DC)zilla2k
1976 Purvis-Eureka EV kit car
2011 Ford focus EV (DC)Soliton1
1990 Daihatsu charade G100 3 door DC conversion.
wovenrovings
Posts: 16
Joined: Sun Sep 06, 2020 6:08 am
Location: Bundaberg Australia
Has thanked: 5 times
Been thanked: 3 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by wovenrovings »

Hi @DkubusEV
I'm up in QLD. I am using a leaf motor in a Iload.
Were you interested in a ISA shunt?
Ctwidle
Posts: 89
Joined: Wed Jan 06, 2021 9:44 pm
Been thanked: 11 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by Ctwidle »

Hi, I’m just down the road near Maleny. I will need a shunt but I’m not sure which suits my project best. Its an Outlander rear motor/inverter in a 74 beetle with Tom’s newVCU and I’m initially hoping to use the original battery pack but I don’t yet know its condition. I will continue to look for a better pack. Does the 500A sound about right or should I consult Tom before ordering?
Chris
User avatar
DkubusEV
Posts: 81
Joined: Sat Sep 17, 2022 4:22 am
Location: Australia
Has thanked: 130 times
Been thanked: 15 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by DkubusEV »

wovenrovings wrote: Thu Jan 05, 2023 4:45 am Hi @DkubusEV
I'm up in QLD. I am using a leaf motor in a Iload.
Were you interested in a ISA shunt?
I have one so far but might need another one e soon as I bought a second gs450h setup not long ago. I got mine from Lars in NL. Pretty fair price too. 👌

Cheers for reply.
Mike.
1998 Mercedes R170 SLK gs450h project
2003 Smart-Roadster hillclimb EV (DC)zilla2k
1976 Purvis-Eureka EV kit car
2011 Ford focus EV (DC)Soliton1
1990 Daihatsu charade G100 3 door DC conversion.
wovenrovings
Posts: 16
Joined: Sun Sep 06, 2020 6:08 am
Location: Bundaberg Australia
Has thanked: 5 times
Been thanked: 3 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by wovenrovings »

Hey I missed the message notification. 500A sounds about right. I am using a 500A on a leaf motor and I don't think the outlander uses anymore power than that.
Ctwidle
Posts: 89
Joined: Wed Jan 06, 2021 9:44 pm
Been thanked: 11 times

Re: Isabellenhuete IVT-S x 3 in Australia.

Post by Ctwidle »

Hi, could you please check you sent the message to:
ctwidle@gmail.com
I haven’t received anything yet,
Thanks,
Chris
wovenrovings
Posts: 16
Joined: Sun Sep 06, 2020 6:08 am
Location: Bundaberg Australia
Has thanked: 5 times
Been thanked: 3 times

Re: Isabellenhuete IVT-S x 2 in Australia.

Post by wovenrovings »

Got 2 x 1000A left.
Post Reply