Tesla model 3 resolver

Topics concerning the Tesla front and rear drive unit drop-in board
Post Reply
Marko1950
Posts: 1
Joined: Thu Sep 08, 2022 7:06 am

Tesla model 3 resolver

Post by Marko1950 »

Hi,

I am building my own electric motor for ev conversion. It will be axial flux PM motor with two rotors and one stator in the middle. I am using tesla model 3 inverter to run it. Since I do not own tesla model 3 motor, I do not have resolver which is compatible with Tesla model 3 inverter.

I do not want to buy tesla motor just to get resolver from it. Is there someone who has tesla model 3 2017-2021 motor, willing to sell me resolver?
What I can see from the videos and pictures it should be VR resolver with three rotor poles and 10 stator teeth.
If you do not have a resolver to sell, could you share the part number on the stator housing, or if you know who is the manufacturer of the tesla model 3 resolver, please share the information. Valuable information are resolver's stator outer diameter, number of turns of primary, SIN and COS windings per teeth, rotor inner diameter (or diameter of shaft where resolver's rotor sits on it).

Thank you
Post Reply